How do I get started with PXI timing?
I'm working in a lab that is trying to start to use a National Instruments PXI/VXI hybrid system. I currently know very little about timing and triggering. Basically all I know is that the timers we are using (PXI-6653) generate a square wave at 10 MHz and I can route it to the CLK10_in. I'm able to confirm that the clock is being routed there by using some of the example VIs and using a scope to see that the square wave is being outputted through the BNC connector on the back. I can see it's not the regular PXI 10 MHz reference clock because there is a difference in 10 MHz signals between before I hit the "GO" button on the routing VI and after I hit the "GO" button. So all in all, I can confirm I'm getting the 10 MHz signal routed to the CLK10 backplane signal.
However, my main question is how I can use that CLK10 signal on my DAQ cards? We are using PXI-4462 and PXI-6123 cards. I'm trying to use some of the example VIs given with NI-DAQmx. Is the "onboardclock" a timer that's on the DAQ card itsself? What about this sampleclock?
I've read through the examples and tutorials on the NI website, and they aren't very "newbie-friendly".
Thanks,
Michael
Hello Michael,
Thanks for posting on the forums! What you are trying to do is called reference clock synchronization. This is also referred to as Phase Lock Looping (PLL) to a reference clock. You will access this reference clock with a DAQmx property node as shown below.
Your PXI-4462 is a DSA device. This needs to be the Master device. Take a look at the Synchronization examples that ship with LabVIEW. Launch the NI Example Finder by going to Help»Find Examples. Browse by task to Hardware Input and Output»DAQmx»Synchronization»Multi-Device. The image above comes straight from the Multi-Device Sync-AI and AO-Shared Timebase & Trig-DSA.vi example. You can modify this example to suit your application. But remember, the DSA device needs to be the master.
You may be wondering what the Sync Pulse is for. In addition the the NI Example Finder, the NI-DAQmx Help is a great resource. Do a search for Sync Pulse, and you will find quite a bit of information about it as well as other useful things to know and consider with DSA synchronization.
Message Edited by RT4CY on 10-25-2008 03:06 PM
Rod T.
Attachments:
refclock.jpg 110 KB
Similar Messages
-
How can i get started with messaging in java
how can i get started with messaging in java
If you're talking about writing mail clients in java, you might want to start with a better forum. We're focused on Messaging Servers, here. Unlikely you'll get any Java programming from us.
If you're talking about Messaging Server, start by downloading the software from sun.com/downloads. -
FAQ: Common Lightroom workflows, or How do I get started with this program?
Starting to use a new application can be intimidating, especially one as sophisticated as Lightroom. Here is a handy list of resources to help you with your Lightroom workflow:
Getting Started Tutorials
10 Things Beginners Want to Know (Video, 36:28) from How to Get Started with Lightroom 4 with Terry White
How And Why You Should Use Adobe Lightroom
Beginners Guide on How to Use Lightroom 3
Photoshop Lightroom Tutorials Roadmap
A wealth of Lightroom tutorials (John Nack)
The Official Lightroom resource center
The Lightroom home page
The Lightroom 4 Users Guide
Continually updated resources
Learn Photoshop Lightroom 4
Learn Lightroom 4 Channel on Adobe TV
Julieanne Kost's Lightroom tutorial videos
Lightroom tutorials on Photoshop.com
Layers Magazine Lightroom Tutorials
Lightroom Killer Tips
Additionally, check out the rest of the Lightroom FAQ.
Follow Lightroom through social channels to receive a constant stream of tutorials:
Facebook
Google+
Twitter
YouTube (Check out the Getting Started with Lightroom series of videos)contact adobe support, http://www.adobe.com/support/chat/ivrchat.html
-
How to disable "getting started with Firefox" web page when starting Foxfire?
Every time I open Firefox I get the additional web page "getting started with Firefox" and do not know how to disable it. Can you help?
The page may be set as an additional home page, the following link shows how to check and set your home pages - https://support.mozilla.com/kb/How+to+set+the+home+page
-
Opening an image editing application for the first time can be intimidating. The more powerful the tool, the more complicated it can be to learn to use. Below are a list of resources to help you get started with the Photoshop Elements Editor.
I just bought Photoshop Elements, where do I start?
There are a lot of directions you can go when you first make your purchase. Here is your first roadmap.
Getting Started Tutorials
What do all these terms mean?
There are some common words tossed around when talking about image editing or tool use. Here is a helpful guide to define these: Photoshop Elements key concepts
Photoshop Element Help Topics:
Workspace basics
Tools
Color and tonal correction basics
Elements Basics, an overview of Elements' essential concepts on Photoshop Elements User.com
Where can I find some tutorials on the web?
There are many resources for learning Photoshop Elements on the internet. Here are some that we recommend.
Photoshop Elements: Where can I find some good basic tutorials? on the Photoshop Feedback site.
Like Photoshop Elements on Facebook for daily tutorials and inspiration. As well as the occasional contest.
Editing Tutorials for Photoshop Elements on Photoshop.com
Getting Started with the Elements Editor on Photoshop Elements User.com
Photoshop Elements for Dummies.com
What about video tutorials?
Some find it easier to watch a product being demonstrated and explained by an expert
Learn Photoshop Elements 11 on Adobe TV
Photoshop Elements channel on YouTube
Where can I find books about learning Photoshop Elements?
Photoshop Elements books on Pearson Peachpit PressHi Christoph and WarriorAnt,
Thank you both for the replies.
I don't know anything about GarageBand because I've never used it. I've never used any music software before, (other than iTunes, Ha!)
I don't have GarageBand on my Mac because it wasn't stock on the old Powerbook G4, so I would have to buy it. I'm happy to do that if I can figure out that it does what I want ... but I'm overwhelmed by the info at Apple's site. Too much for a beginner like me. Even the wikipedia.com entry for GB uses too many terms I don't know, so I'm easily lost.
I just want to be able to set up drum loops and play along with them. The main thing is that I'm able to use third party loops. There are so many really amazing loop products out there ... jungle drums, acoustic jazz drums, lounge, etc. I don't want to get caught up in anything proprietary (like Band-In-A-Box) because the selection is limited. I'm sure GarageBands loops are great, but I want access to all these other third party loops as well ... loops that were not specifically made for GarageBand.
Will GarageBand let me drop in any and all drum loops from these other companies?
And does GarageBand work like a basic sequencer, where I can program up an intro, X number of measures of a loop, then a turnaround, then a variation loop, then an ending, etc?
I know the high-end stuff like Native Instruments Kontakt does this, but unfortunately it also does a kazillion other professional-level things I will never need and don't want to pay for (and which make the software more complex and daunting).
Thank you again, both of you, for responding and helping me with this project.
Just a little more advice on those two questions would really go a long way.
-JOHN -
How to remove "Get started with your site"
Hello,
I am in the process of automating the creation of a site collection using PowerShell. Everything works fine but I would like to remove or hide the "Get started with your site" that we see the first time we open a site. Deactivating the Getting
started feature will not remove it.For other readers, here's the full script needed:
# First, get a reference to the target web app:
$web = Get-SPWeb "[TargetSiteURL]"
# Assuming that 1) the web page file that you want to examine is
# the default landing page and 2) Publishing has been activated
# for the containing site collection, the following gets you a
# reference to the web part manager:
$wpm = $web.GetLimitedWebPartManage("pages/default.aspx", [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
# Note the "pages" in the path. Next, the following lists out
# all web parts on this page:
$web.GetLimitedWebPartManager("pages/default.aspx",[System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared).WebParts
# Review this list, and then identify the PartOrder of the web
# part you want to remove. It its, say, its "5", you get a
# reference to web part like so:
$wp = $wpm.WebParts[5]
# Now delete the web part:
$wp.DeleteWebPart
# and close the web app reference:
$web.Close()
It's easier to remove the web part directly from the page, while it's in edit mode, but then the scripted method also works when automation is needed. -
How do I get started with screen sharing?
There are dozens of articles on the web and posts here talking about what's new with screen sharing in Lion, but for the life of me I can't find anything that tells somebody completely new to screen sharing how to get started. If I want to do screen sharing with a friend (over the Internet, not a LAN), what exactly do we have to do to get started?
Sorry for a noob question, but everything I see assumes you're already completely familiar with it and just want to see Lion tweaks.ok so go to your system preferences on your MAC > go to sharing > click the screen sharing option on> next go to the add users section right below on the right and you add your friend whom you want to share with. You have to select a password for this person. When you get this done you will see a
Other users can access your computer's screen at:
and you will have an address there with some numbers. give this to your friend whom you want to see your screen, they have to post this in their web-browser, and that is how you remotely screen share. This is if you all are not on the same network. Also if you want to share his/her screen they will have to do these steps for you. -
I recently downloaded a trial version of photoshop but I can't find a simple enough way to start it. I'm signed in but when I press the "get started" button it brings up the purchase options. I just want to run the trial for now. Any ideas?
Jacobm51486856 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from being authorized.
-
How can i get started with iChat
How can I get to talk to a friend who uses @mac.com if I log in with my gmail account?
While we all have MacBooks in this forum not all of us use iChat. There's a iChat Support Community where everybody uses iChat. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/applications/ichat -
How do I get started with the Photography Subscription?
I recently signed up for the Photography subscription (incl. LR5) via telephone. Payment has been cleared. During the order, the operator updated my email address to a new address I now prefer. The order doesn't show up in My Orders, and only a free subscription of Creative Cloud shows up in My Subscriptions. However, I can't sign in with the new email address, which I think is not allowing me to download PS or LR which is what I purchased. How do I get this resolved?
contact adobe support, http://www.adobe.com/support/chat/ivrchat.html
-
How do i get started with NFC for my android app?
As far as i can tell there is absolutely nothing to be found about NFC for actionscript.
Could anyone point me in the right direction to get started on this?
Kind regards
Denisyou should look for (or create) an ane (adobe native extension) to provide the gateway you want.
SmallScreenDesigns may already have one that does what you want: http://www.adobe.com/devnet/air/native-extensions-for-air.html
and: http://code.google.com/p/ane-lab/source/browse/#svn%2Ftrunk%2Fmobile%2Fandroid%2Fjava%2Fnf c1 -
How do I get started with iphoto buddy?
I've installed iphoto buddy and created a new library called "Family". How do I get photos of my family into the new library?
You don't need iPhoto Buddy unless you're using iPhoto 5 (from 2005) or earlier.
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' will do the same job.
To get photos into a new Library just import them from the Finder like you always do.
Regards
TD -
How do i get started with my new ipad2
i just brought a new ipad2 .how do i get started
Read the manual:
iPad User Guide (For iOS 5.0 Software) -
How do I get started with a home page most similar to old one?
I do not want the new Firefox to complicate my life. I want the new version to simulate the old version as closely as possible. And when the dust has settled I want to know how to simply start up and get to work.
Hi burrsage,
I'm not sure what exactly you are referring to, but I'll take a stab at it! First, I'd suggest that you try [[Updating Firefox]]. As of writing this, 10.2 is the current latest version.
If you are referring to the look and feel of Firefox itself, you should take a look at [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 this article with common questions after upgrading]. It will show you what's changed and how you can simulate the old experience.
If you are specifically talking abut your home page, you should try changing your home page to:
about:home
Type this in the address bar and hit enter. If you like it, you should make it your home page. If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps -
How do I get Started with Dynamic Web Pages?
I am presently following Janine Warner's Dreamweaver CS3 video series. I noted that the Advanced part of this tutorial series focuses on Dynamic Web Pages, but only uses Cold Fusion. From what I can gather, CF costs around $1000, while PHP is free! My question is really this: in going from static to dynamic web design I'M A COMPLETE NEWBIE, so what do I need? I am doing some planning here -- I know it won't happen overnight.
(BTW: I was surprised to discover that CF is NOT included in my CS3 Master Collection). It might appear then that support for PHP is better than for CF?
Apparently, I need a server -- well, OK I have PCs to spare. Fast internet, I also have: Comcast standard -- 12MP
Now, I think I also need Apache -- which apparently runs on the server and does something.
So then I DL PHP, figure out how it works, and it will integrate with DW CS3 in some way.
Now, what have I missed? Is there some really basic, first-time-with-using-a-server place or tut I should go to or read? Before you ask: No, I'm doing all this myself on a shoestring budget.
Are there expensive hosting fees for dynamic web sites or other items I will run into? Can I just use a PC over my Comcast cable as the server run from my home? (Really high traffic is not anticipated)
All recommendations appreciated, thanks.
ThomMany of these questions have already been answered in your thread in the Dreamweaver General Discussion forum, so I'll just stick to a few basics.
You need a server whichever server-side technology you choose, but "server" is not a physical machine, but a piece of software that you install on your development computer. You'll find details of how to install a PHP environment in the following article: http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html.
Similar instructions are available for setting up a ColdFusion server at http://www.adobe.com/devnet/dreamweaver/articles/setting_up_coldfusion.html. The article is for ColdFusion 8, but ColdFusion 9 is installed in exactly the same way.
Hosting for PHP/MySQL is plentiful and relatively cheap. However, make sure the hosting company offers a minimum of PHP 5.2 and MySQL 5.1. Hosting for CF is harder to find and tends to be a bit more expensive, but not prohibitively so.
Maybe you are looking for
-
How can I export a slideshow from iPhoto to iMovie 09. I try, but it only exports 211 out of the 311 photos I have in the slideshow I made on iPhoto.
-
PO output issue. Create request is missing .
Hi SRM gurus, We are using SRM 4.0 with extended classic with EBP SUS scanario. There are some failures in XI for change PO request. The error is as below : An error occured within an XI interface: Exception occurredA:BBP_PD:007 -No data found
-
Audio Output problem when connected to car port
Just switched to an iPhone 4 from the 3G model. When I play any audio (music or Pandora)while connected to my car port, I get bits of noise at timed intervals coming throught the speakers. I would say it is about every 2-3 seconds I get this little a
-
Error Export DB 9.2.0.8 Windows 2003
I have DB Oracle 9.2.0.8 in windows 2003 cluster (Active/Passive) export db, error: EXP-00008: errore ORACLE 37002 rilevato ORA-37002: Oracle OLAP failed to initialize, please contact Oracle Support. ORA-06512: a "SYS.DBMS_AW", line 18 ORA-06512: a "
-
Unable to install diisc 2 & 3 elements 10
I have a new pc laptop. I installed disc.1 of elements 10 - no problems. Then it said put in dics 2- I pressed OK before I took out disc 1 then my dvd disc slot wouldn't open until I went out of the adobe program. When I put my disc 2 in it only allo