How do I get Text Effects to Display Clearly In Illustrator?

How do I get text effects to display clearly in Illustrator?

This is how it started:
This is what happened after I turned on the glow:
This was what the glow setting produced:
This is what the shadow setting produced:

Similar Messages

How do I get text to flow from one page to the next in Pages 5?

How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

How do I get this effect?

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3244557723_1857154
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Hi!
I have a series of QuickTime files that I am trying to
present in a nice
interface. I know how I can create this effect in Flash- but
given the
number of .movs I have, I am thinking of sticking to QT. The
example I have
in mind is
http://www.apple.com/aperture/quicktours/
I went through the source code and tried to replicate it by
changing some of
the values but it does not seem to work. I thought about
using frames to
ease complication but I find frames cumbersome. I am open to
suggestions but
would prefer to keep the video clips in QT versus converting
to FLV.
Thank you.
Kelvin
--B_3244557723_1857154
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>How do I get this effect?</TITLE>
</HEAD>
<BODY>
Hi! 
 
I have a series of QuickTime files that I am trying to
present in a nice in=
terface. I know how I can create this effect in Flash- but
given the number =
of .movs I have, I am thinking of sticking to QT. The example
I have in mind=
is <a href=3D"
/aperture/quicktours/</a> 
 
I went through the source code and tried to replicate it by
changing some o=
f the values but it does not seem to work. I thought about
using frames to e=
ase complication but I find frames cumbersome. I am open to
suggestions but =
would prefer to keep the video clips in QT versus converting
to FLV. 
 
Thank you. 
 
Kelvin
</BODY>
</HTML>
--B_3244557723_1857154--

Hi(Bonjour)!
Welcome to the forum.
It will be difficult to compose this effect in FCE without commercial plugins like Nattress's Big Box of Tricks (G Glow dissolve).
But you can try this: create a colorized transparent document (yellow and red around the frame) in Photoshop. Save in PNG. Import into FCE.
Put it on V2, over the edit point for your video clips in V1.
Try to keyframe opacity values, animate the position with erratic displacements and add some twirling or distord effects (that can be keyframed too).
With some patience, I'm sure that you can achieve a such effect.
Michel Boissonneault

How can I get pubished parameters to display the available settings

how can I get pubished parameters to display the available settings?

according to the online help, I'm supposed to click on Title to get to the titles settings as follows
"Adjust a title’s settings
You can modify a title’s default settings in the Title inspector.
Select a title in the Timeline.
Choose Window > Show Inspector (or press Command-4), and click the Title button at the top of the pane that appears.
Adjust the available settings as needed.
Note: You can also keyframe many of the settings in both the Title and Text inspectors."
Gsoing to the Text inspector, there does not seem to be anything in the menu where I can change the color of the text. Based on the photo that appears with the above instructions --it appears the ability to change ink color is under the Published Parameters that is the menu I cannot get to 'drop'

How do I get more effects in my action box? I am only showing a few, like BOTTOM BORDERS, LOSE WEIGHT AND SPECIAL EFFECTS. That is all. The turotials I've checked into all show a long list of effects in the actions box. If anyone could help, I appreciate

How do I get more effects in my action box? I am only showing a few, like "Bottom Borders, Losing Weight, Resize and Crop, and Special Effects. And they do not list but a few effects. When I have watched the tutorials, they are showing a long list of effects in the action box. (with a side space bar) I do not. When I have clicked on the little arrow at top, and clicked "Load Actions", a box comes up, but it is blank,saying "no items match your search". I'm lost! If someone could help, it would be much appreciated! I would like to start using this.
Thank you.

Apple Computer Customer Relations:
1-512-674-2500

HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps.

I have an ipod touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

I have an Ipod Touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls h

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls help me http://www.youtube.com/watch?v=mfU8bZDKAMQ&list=HL1352499622&feature=mh_lolz

This looks like the final logo was created with several layers probably in Illustrator, then the file was most likely imported into After Effects and revealed by animating mask paths.

How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...

(Running Business Objects Release 2 (Web-I), No other reporting modules)
How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...
In my reports, I count the number of tests of one of our products and another count on the number of failures. I then use a simple formula to give me the defect rate percentage (DR%)
The universe objects used in the calculation are:
Assembly Number (dimension)
Human Sn (dimension)
Test Code Description (dimension)
I created a variable (called [Count Assys]) that counts the number of Assemblies Tested:
Formula: =Count([Assembly Number];All)
Another variable (called [Failed Count]) counts the number of failed tests:
Formula: =Count([Test Code Description];All) Where ([Test Code Description] <> "FUNCTIONAL TESTS PASSED")
NOTE: There is a "not equal to sign" between [Test Code Description] and "FUNCTIONAL..." above, but the forum is blanking it when I preview the message. Not a big deal, but it may be important for someone looking to help...
I then have a third variable called [DR%] that divides [Failed Count] into the number of [Count Assys], which yields a number formatted as a percentage.
Formula: =[Failed Count]/[Count Assys]
The above works great!
The problem is: when I have a zero defect count (everything passes), the cell is blank, so the percentage variable remains blank. I want a zero (0) to appear if nothing failed so the percentage appears as 0%
I've searched this forum completely and have tried several Properties changes and different variable strings (like =If([Failed Count]<1,0) and the cell stays blank and cannot come up with an answer.
This one seems simple to me, but everything I've tried has yielded zero <smile> results.
Thanks,
Charles
Edited by: Charles Norman on Dec 9, 2008 12:44 PM
Edited by: Charles Norman on Dec 9, 2008 12:47 PM

Hi Charles,
Use [Dr%] Variable formula as =if(IsNull([Dr%]);0;[DR%])
Here IsNull returns the Boolean value of variable [Dr%] if its true then inserts 0 else the percentage values of failed tests based on the total number of assembly tests performed.
I Hope this is what you want to achieve....
Thanks....
Pratik

How do i get text messaging through my macbook pro?

how do i get text messaging through my macbook pro?

Welcome to Apple Support Communities
If you have an iPhone, iPad or iPod touch and you use iMessage, you can use it in your Mac if you want. OS X Mountain Lion includes Messages, that allows you to use iMessage.
First, check that your computer is supported > http://www.apple.com/osx/specs If so, open  > About this Mac, and see what OS X version you have:
10.5 or older: you have to upgrade first to Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
10.6 or 10.7: open  > Software Update, and install the most recent version. Then, open the App Store and purchase OS X Mountain Lion.
10.8: you are already using OS X Mountain Lion, so open the Messages app.
While OS X Mountain Lion is being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com
If you aren't referring to iMessage, you can't send text messages in your computer

How do I get an App to display on all desktops in Mission Control?

How do I get an App to display on all desktops in Mission Control?
I tried:
Right-Click on the icon in the Dock
Options -> All Desktops
This doesn't work.
The App was created using REALStudio. Does this have any bearing on the issue?
SyB

Hi, if the App is in the Dock, right click, choose Options>Open at login.
Or System Preferences>Accounts>Login Items window, drag the App there or click on the tiny plus icon to add it.

I can't get text effects to preview in cs6 After Effects. It was working a week ago.

I can't get text effects to preview in After Effects CS6 browser. It was working a week ago.

I uninstalled and reinstalled a current Quicktime. Couldn't find hardware accelerated previews in Bridge setting. Is it under "preferences"? Couldn't find it in preferences. Still not previewing.

How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

How can I get rid of the display of the last played music-title

How can I get rid of the display of the last played music-title
When playing a music-title the name of the title and it's progress is displayed in the box at the top of iTunes, even if the music is already stopped or ended. This display is impeding f.i. when copying music-albums to iPhones and watching the progress. Can anyone tell me please how to make the display of the last played music-title disappear?
Thank you very much in advance.
Hans M

OK, thank you very much, fiend.
However: Since yesterday afternoon my e-mail-acount is being flooded with 50+ e-mails every few hours which are not at all related to my question. I'm copying the properties of one e-mail as a sample. Could you please organize this flood to stop or tell me what to do?
Thank you very much!
Hans M
Return-Path: <[email protected]>
Delivered-To: [email protected]
Received: (qmail 11232 invoked from network); 2 Jan 2014 21:38:42 -0000
Received: from unknown ([172.18.1.109])
 by mailbox11.aon.at (qmail-ldap-1.03) with QMQP; 2 Jan 2014 21:38:42 -0000
Delivered-To: CLUSTERHOST smarthub76.res.a1.net [email protected]
Received: (qmail 9065 invoked from network); 2 Jan 2014 21:38:41 -0000
X-Spam-Checker-Version: SpamAssassin 3.2.0 (2007-05-01) on
WARSBL504.highway.telekom.at
X-Spam-Level:
Received: from redstreak.apple.com (HELO bz.apple.com) ([17.151.62.54])
 (envelope-sender <[email protected]>)
 by smarthub76.res.a1.net (qmail-ldap-1.03) with RC4-MD5 encrypted SMTP
 for <[email protected]>; 2 Jan 2014 21:38:41 -0000
X-A1Mail-Track-Id: 1388698720:8973:smarthub76:17.151.62.54:1
Received: from nwk-jivep-lapp04.corp.apple.com ([17.34.26.3])
by bz.apple.com (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0)
64bit (built Aug 10 2011)) with ESMTP id <[email protected]> for
[email protected]; Thu, 02 Jan 2014 13:38:40 -0800 (PST)
Date: Thu, 02 Jan 2014 13:38:39 -0800
From: Apple Support Communities Updates <[email protected]>
Reply-to: discussions-replies <[email protected]>
To: Hans M <[email protected]>
In-reply-to:
<2-24330225-3-6714313-1388532858380-2-24354104-3-1039882-1388697859204.jivesbs.ji vemailuser@https://discussions.apple.com/>
References:
<2-24330225-3-6714313-1388532858380.jivesbs.jivemailuser@https://discussions.appl e.com/>
<2-24330225-3-6714313-1388532858380-2-24353958-3-6714313-1388696827692.jivesbs.ji vemailuser@https://discussions.apple.com/>
<2-24330225-3-6714313-1388532858380-2-24354104-3-1039882-1388697859204.jivesbs.ji vemailuser@https://discussions.apple.com/>
Subject: [iTunes for Windows] - Re: Cannot follow these instructions
"Where are my iTunes files located?" [7h40p2-20wvf-ehzw3]
MIME-version: 1.0
Content-type: multipart/mixed;
boundary="----=_Part_577492_1482299802.1388698719437"
Auto-submitted: yes
Content-disposition: inline

How do I get my TV to display what's on my computer screen (Not I-tunes)?

How do I get my TV to display what's on my computer screen (Not I-tunes)?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

How do I get Text Effects to Display Clearly In Illustrator?

Similar Messages

Maybe you are looking for