How do I get the Apple tv to play out of my Bose speakers that has the typical white and red plug ins? Do I need an "optical audio" cord (that is what is available as a plug in on the back of the Apple tv that has the red and the white on the other side?

How do I get my speakers to play the Apple TV? My TV is recognizing the Apple TV and the sound is playing out of the TV speakers, but even though I plug my speakers into my TV, it does not play what the TV speakers are playing. Do I have to plg the speakers into the actual Apple TV unit? If so, do I need an "optical audio" plug in?

appletv play audio out of optical out of hdmi and the old alu one play out the RCA too
the typical the white and red plug ins would be RCA if you have a atv2 (the black one) you cant use
RCA as that is analog and optical and hdmi are digital
you can get converters but some would be pricy and could cause delay between image and pictures for video

Similar Messages

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

How do i get my ipod touch to play on the car radio

How do I get my Ipad touch to play through the car radio?

You can buy something like this Belkin Cable here, which I use, and plug it into your car's Aux port if it has one. They can also be found in most electronics stores.
If your car doesn't have an Auxillary port, you can buy something like the Griffin iTrip, which allows you to set your iPod to transmit on a specific FM frequency, and you can just tune your car to that station. You can find that anywhere electronics are sold.

The Ipod I have been using for years no longer will hold a charge. My wife doesn't use hers so I would like to use it as my main ipod now. How do I get it to sync my play lists?

The Ipod I have been using for years no longer will hold a charge. My wife doesn't use hers so I would like to use it as my main ipod now. How do I get it to sync my play lists?

Hi BFW29,
Thanks for visiting Apple Support Communities.
You can use these steps in this article to set up syncing with your computer and the new iPod:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Regards,
Jeremy

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

How do i get a mac book pro to out of the box

how do i get my mac book pro to out of the box. clear everything off it and start over

Boot with your original system installation DVD: with the disc in the drive, restart the MBP while holding the C key. From the Utilities menu, select Disk Utility. Erase the internal disk.
Quit Disk Utility and install OS X. Install the applications that came with the MBP from the Applications DVD.

HT1473 How do I get a purchased song to play on my ipod shuffle remote from the docking station?

How do I get a purchased song to play on my ipod shuffle remote from the docking station?

I can think of only one reason a song would be "converted" while it is being loaded on a shuffle.
Select the iPod in the iTunes sidebar, under DEVICES. Over to the right, depending on iPod model, go to the Summary or Settings tab. There should be a setting there that says Convert higher bit rate songs to 128 kbps AAC (the 128 kbps part may be adjustable). If that checkbox is checked, try unchecking it.
NOTE: This setting may allow more songs to fit on the shuffle, but for any converted song, the sound quality will become inferior. So I don't use it.

How do I get very short movies to play one after the other?

How do I get very short movies to play one after the other?
I have some video tutorials to show me how to use software on the Mac.
When a short 4 min. video is finished - I have to double click the next one.
There must be a way to have continuous playing of movies back to back...
I've looked - I am sure it's obvious...
Help please. Thanks!

make them type 'Music Video', and add info on artist to group them, then play them.

How do I get a factory unlocked iPhone 3GS out of (connect to iTunes) mode?

How do I get a factory unlocked iPhone 3GS out of recovery (connect to itunes) mode?
Once the iPhone 3GS is in DFU mode and plugged into iTunes, the restore and update process begins. The restores process are as followed:
Extracting software > Preparing iPhone for restore (blank screen) > Preparing iPhone software for restore > Restoring iPhone software > Verifying iPhone restore > Restoring iPhone firmware > The iPhone cannot be restored. An unknown error occurred (1).
I clicked on the more information tab and was taken to a website with some troubleshooting. I did what they suggested (based on the error #) and still no luck. I’ve tried to restore and update about 10 times now but the same message keeps coming up at the end. What should I do now?
P.S: I have the latest version of iTunes (11), my windows is up to date etc ...

CDiiva wrote:
The iPhone cannot be restored. An unknown error occurred (1).
This Error message is indicative of a Hardware issue. The device may need Service.

How can I get my AVI files to play on my PC?

How can i get my AVI's to play with sound, whenever i load them there is a pop up directing me towards the quicktime page that has the add ons (CC, xvid, dvix etc) i tried converitng to divx and still no sound. HELP!
I have downloaded DVIX and XVID and then i purchases QUICK TIME PRO. Nothing works. THANKS!

The following link may be of help with .avi's
http://www.headbands.com/gspot/
In this discussion I posted two links with info for Divx and Xvid, how accurate I don't know, but the info is from their own websites
http://discussions.apple.com/thread.jspa?messageID=6572561&#6572561

What codec or plug-in do I need to see audio

What codec or plug-in do I need to see audio & video on .mov files in quicktime?

OK, I will get it!
This is where I went and it is unfortunate I have to go through this evry time:
http://support.apple.com/downloads/#MPEG-2%20Video,%20Linear%20PCM,%20timecode
QuickTime Broadcaster 1.5.3
QuickTime Broadcaster features Support for broadcasting ISO-compliant MPEG -4 audio (AAC LC) and MPEG -4 video ( MPEG -4 Part 2 ) Instant VOD automatically saves the live broadcast to the hard drive and prepares it for streaming (creates hint tracks )
http://support.apple.com/kb/DL764
too frustrating:
downloaded the QuickTime Broadcaster 1.5.3 add-on and now get an error message that says I need to download something else here:
http://www.apple.com/quicktime/resources/components.html?os=OSX&ctype=696d6463&c subtype=78647662
... but there are too many choices and I never know which one I need – CC, Divx, Xvid, ZyGo, Streambox, Autodesk ????

Please Help,how do i get my iphone 4 to play all my songs from icloud, it is currently only playing just a smal number of songs from my library which is stored in icloud.

Please Help,how do i get my iphone 4 to play all my songs from icloud, it is currently only playing just a smal number of songs from my library which is stored in icloud.

There are a number of OS X apps, many free, that will save your messages, allowing to view and print them.
http://www.softwarebbs.com/wiki/How_to_transfer_SMS_from_iPhone_to_Mac,_backup_i Phone_SMS_message_on_Mac
Google, for other options
Your "other" of 6 GB may include corrupted data or file sytem errors. If after removing the messages there is still >2GB, you will need to restore the phone in iTunes, first using a backup (made after deleting the messages) and if needed as a new iPhone.
iTunes: Restoring iOS software

How do I get my itunes songs to play from computer onto a playstation

How do I get my itunes songs to play from my windows computer through the internet to my playstation PS3

I'm not a windows person anymore but I've heard it said that you can point Windows Media Player at you iTunes library and you can set it up to serve up to the PS3. Remember the the PS3 doesn't work with DRM encoded music.

How do I get a movie clip to play fully in an iphoto slide show.

How do I get a movie clip to play fully in an iphoto slideshow. Right now it only plays for a few seconds, while the complete clip is 22 seconds.

Bring up the Settings pane for the slideshow and click on the movie clip in the tray at the top. Then in the Settings pane click on This Slide button and set the play time to the actual length of the movie clip.
OT

How do I get the Apple tv to play out of my Bose speakers that has the typical white and red plug ins? Do I need an "optical audio" cord (that is what is available as a plug in on the back of the Apple tv that has the red and the white on the other side?

Similar Messages

Maybe you are looking for