How do I get the apple wireless mouse open to replace the battery?

How do I get the apple wireless mouse open to replace the battery?

Thank you!  I am 71 also, and broke a fingernail trying to get the thing open, thought there must be a trick to it.  After many attempts, when I had your reply it opened right up.  I think Apple delights in making people look stupid.  Love the machines, but dislike the smooth surfaces with no obvious switches to run the machine itself.  Computer is still not "discovering" the mouse, so there may be some further problem to be resolved.  The whole setup worked fine until a few days ago when the computer started to lose the mouse now and then.  I thought probably the mouse needed batteries, as I just had replaced the contemporary batteries in the keyboard.
I'm retired, too, in Portland, Oregon, USA, and write poetry (though not for advertising agencies), get lot of rejections and an acceptance about once a year. 
<E-mail Edited by Host>

Similar Messages

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • It is possible to connect the magic mouse, magic trackpad and the apple wireless keyboard at once on the same Bluetooth network on the new iMac?

    I want to buy a new iMac but in my country the iMac just come with the magic mouse and I want the trackpad for the multitouch geastures. Can you help me with this question?

    Yes you can have multiple Bluetooth devices connected simultaneously. I believe you have have up to 7 BT devices at one time.
    Also you may find http://www.apple.com/support/bluetooth/ helpful.
    Roger

  • How can i get my apple  magic mouse to work on windows7

    Can my apple magic mouse work with my hp pavilion g7 notebook windows 7?

    You need the mouse drivers from the Apple Boot Camp support files.
    I don't know if the Apple License agreement allows you to run the software on non-Apple hardware though.

  • I can't get rid of "bing" from opening in new tabs. How can I get a blank page to open as in the past?

    Up until yesterday, I could open a new tab with a blank page. Now, every new tab opens to a bing search page and focus is in the search box. Very annoying when I begin to type a URL and have to click in the URL to continue typing. How do I get back to a blank page opening?

    Thanks. You did have to go through another step-"Extensions", to find the Icon for the StartNow Toolbar with Bing involved.
    Yep tried it and it got rid of Bing!! Happy Happy

  • Anybody having trouble with the apple wireless mouse? I have replaced mine twice in the last 5 years. Is this normal wear?

    I have replaced my magic mouse twice in the last 5 years. Is this normal wear?

    you have to disconnect a bluetooth device with one device before it can be paired or connected to another

  • Can the apple magic mouse spread out all the windows to pick one of the ones you have open? The four finger swipe?

    Just as it asks above.

    I wasn't sure what it was called, but thats it. I've tried the actions it says and can't get it to work. Do you know if I need to have an update to the mouse or a newer version of OS? I currently have 10.6.8. I really appreciate your help

  • What is the best wireless mouse/keyboard combo for the Mac mini.

    Right now I'm using a Logitech k360 keyboard/mouse combo that works great on my pc but it's horrible on my Mac mini. I'm even debating whether I should return the Mac mini because I think something may be wrong with it. Also, my Mac mini is inside of my entertainment center which has a glass door on it, could this be part of the problem?

    John-Blaze wrote:
    .....Also, my Mac mini is inside of my entertainment center which has a glass door on it, could this be part of the problem?
    This should be no issue whatsoever.  I have a very similar setup
    with the Mini inside and enternainment center w/glass doors.
    Just make sure there is enough room to have sufficient air flow
    around it.
    Is yours constucted out of wood or metal?
    ....I'm even debating whether I should return the Mac mini because I think something may be wrong with it.
    Are the keyboard mouse issues the only issue or is there
    something else in addition to that?
    What exatly do you mean by working horrible?  Just what is
    actually going on when you use them.  As I see on the website
    Logitech only specs Windows OSes, it could be a driver issue.
    Also, if this is the new Mini, do you have external USB3.0 drives
    connected to it?  There have been issues with Bluetooth, however
    the Logitech specs do not state that it is Bluetooth but could
    still be affected.

  • How do I get my iphone 4 to open safari for the internet to work?

    any sugestions will be gladly appreciated!

    Connect to iTunes...
    See Here
    Syncing with iTunes
    From Here
    http://www.apple.com/support/iphone/syncing/

  • Apple wireless mouse does not reconnect after changing batteries

    The wireless mouse on my iMac quit working after I changed batteries. There was no response to mouse clicks, or movement, or scrolling. Eventually I connected a USB mouse, did an orderly shutdown of the system, rebooted, and the mouse started working again.
    The long story ...
    The first time I encountered this problem was the first time I changed batteries in the Apple Wireless Mouse that came with the iMac 3.06 GHz Intel Core 2 Duo I purchased in January 2010. (The OS is 10.6.2 without updates.) I switched the mouse on, the green light on the bottom of the mouse blinked for awhile (at least a minute), but clicking or moving the mouse got no response. The new batteries were Eneloop 1.2v rechargeables. I tried clicking and moving the mouse several times over a period of ten or fifteen minutes, nothing.
    I started searching the web for clues about what to do and maybe a half hour or so later I tried the mouse again and it worked.
    A few days later I wanted to see if the problem was reproducible. I don’t remember now whether I removed the batteries and reinserted them or just power cycled the mouse, but again the mouse quit working. The green light would blink for awhile, about a minute, then would go off completely. I took this to mean the mouse was searching for the Bluetooth network, not finding it, and giving up. Over the period of half an hour or more I tried switching the mouse off and back on several times. The green light would blink, but nothing more.
    I started searching for tips about reconnecting an Apple wireless mouse after changing batteries. I ran across a (2005) discussion on MacRumors forums titled “Wireless mouse troubleshooting problem...” The symptom was a little different, the mouse was partially functional. In this discussion some contributors thought weak batteries could be to blame. So I replaced the rechargeable batteries with new alkaline batteries. Still no go.
    I attached a USB mouse and looked at the Bluetooth preferences pane. I was surprised to see the Apple Wireless Mouse was listed there with status paired and connected. Still at this point switching the mouse off and on would produce blinking light on the mouse, but no functionality.
    I tried various things in the Bluetooth preferences to see if I could get the mouse connection to restart. When I tried to delete the mouse connection there was an alert saying this was the only mouse connected, was I sure I wanted to disconnect. I said yes, but nothing changed in the Bluetooth preferences pane. I tried unchecking the Bluetooth “On” box, etc. Eventually I only succeeded in losing response to the keyboard as well.
    I attached a USB keyboard, shutdown the system, and rebooted. I didn’t know if having the USB keyboard and mouse plugged in would interfere with the wireless devices, but it did not. After the reboot both the wireless keyboard and the mouse were functional again.
    Since then I have tried removing the batteries briefly a couple of more times to see if the problem would recur. I actually put the rechargeable batteries back in. Both times the connection was remade as soon as I clicked the mouse. I also now have seen the Apple support article about setting favorite Bluetooth devices http://support.apple.com/kb/TA21371 . I'll try that if this issue comes up again.

    Hi, is this a question" Post?
    or are you just offering an insight into your Mouse Issue?
    Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
    I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
    and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

  • Apple Wireless mouse and keyboard with Windows on iMac Intel

    Hi there!
    Is it possible to use the Apple Wireless mouse and keyboard on the iMac Intel running Windows XP?
    My bluetooth setup assistant can't find any of them.
    Thanks!

    Actually if You Use the wireless mouse during the setup for windows it works fine the only drawback it that using the wireless mouse on windows is that it drains the battery more quickly than Mac OS X does. So make sure you have extra batteries around

  • Anybody using an Apple wireless mouse on the Mac Mini ?

    Just bought the bluetooth wireless mouse and keyboard for my new Mac mini core due. The performance of the wireless mouse is disappointing. I believe the timing gap between the hand movement with the cursor movement on the screen is far too long so it is difficult to control the mouse smoothly. I have been using radio type wireless mouse on other PCs and the Apple wireless mouse is the worst mouse I have ever used. Don't know whether anybody here has smiliar experience. Any recommendation to retify or improve this?? I'm happy with the new Mac mini though, and the wirelss keyboard is only okay ( it loses connection with the Mac occassionally even in short distance).
    Mac Mini Core Duo   Mac OS X (10.4.5)   Window XP PC
    Mac Mini Core Duo   Mac OS X (10.4.5)   Window XP PC

    I had a same trouble in my Core Duo 1.66. I posted the same message in Apple Japan Discussions. There is no reply. Then, I checked U.S. Discussions and find your message.
    First, I think a low battery issue in Apple wireless mous, but not. The mous was working for Mini G4. I asked replacement the Mini, then I got another new one. It had the same trouble.
    I found It depends on a distance between Mini and the mous.
    <30cm, it worked perfect.
    <div class="jive-quote">30, <50cm, it did not work anytime, cursor movement was not smooth.
    1m, it did not work smooth, every time cursor was skipping on the monitor.</div>
    I tried it on two new Minis. Mini G4, it works perfectly even it is >5m.
    I believe that it is bletooth issue.
    Could you check the distance dependance between Mini and the mous.
    Finally, I returned the Core Duo 1.66 and refund. If This issue is solved, New Mini performance will be good enough for me.

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • HT6065 I want to pair an Apple wireless mouse to my MacBook Air?

    I want to pair an Apple wireless mouse to a MacBook Air?

    Hi MacBookAirambmiexpe!
    I have an article here for you that will help you set up this wireless mouse:
    Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad
    http://support.apple.com/kb/ht2845
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Wireless mouse working, exept for the tracker? help?

    Ok I am on a macbook running OX 10.4.8 and I just got the new apple wireless mouse and keyboard. The keyboard works great but my mouse: every thing works on it except the tracker. I can use the scroll ball, right/left click, but I can not move the arrow on my screen with it?
    Is there any way to fix this?

    Hi alex:
    It may be that the mouse is defective. Since it is new, call Applecare and indicate you have a warranty issue.
    Barry

Maybe you are looking for

  • Multiple backups of same iPhone on one computer possible?

    Moved this over here from a different area in hopes of getting more eyeballs on it. Does anyone know if it is possible to have multiple backups of the same iPhone on your computer? I have tried changing the name of the phone (ex. my_iPhone, myiPhoneA

  • Flash shopping cart..... Help Please

    Hi Guys, I Would like to add a shopping cart to my flash website. The current website is working with actionscript 2. selling 10+ items Anyone knows of a good tutorial, book, program or advise that would help me from start to finish? should i use xml

  • What authorization required to post idoc from XI via RFC?

    Hi all, I need to post idoc to SAP R/3 system from XI. I have done all the steps correctly. While creating RFC in XI system to connect to the R/3 system, intially I gave my R/3 username and password and tested teh connection. Everything was working f

  • Creating a print template

    I am considering purchasing Photoshop elements but have one problem.  I like to print photo album sheets from home on 8.5x11" paper in portrat orientation with about 9 dfferent photos per sheet.  I can't find any way to resize/reorient the photobook

  • Live Update

    When I try to run live update on my KT3 Ultra ARU I get to about 10% on the download and it just stops downloading. I am having this problem on several of the drivers and utilities. Any idea what is going on here? Any other downloads from other sight