How do I get the applicationbadge count to include subfolders?

When I have new email in my root-inbox the application badge shows the count of those. But when new mail is automatically filtered their count disappeares from the application badge, making the number on the application potentially make me miss critical information. For the time being I have rules inactivated to avoid the disaster :)
Is this possible to achieve?

Hi,
Have you clicked the Advanced Button within this dialog and ticked the Drop Down and Expanding text options?
Regard,
Dom.

Similar Messages

How do you get the page count on an old hp 1012 laserjet printer?

How do you get the page count on an old hp 1012 laserjet printer?

You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
You can find more information in this document: Identifying Page Count.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

How can I get the shutter count for my Canon 7D Mark II using Windows XP?

How can I get the shutter count for my Canon 7D Mark II using Windows XP? I've been looking lots of places and doing some file uploads, but I can't seem to find anything. I'm wary of downloading software I know nothing about. Any help is greatly appreciated.
Solved!
Go to Solution.

Nevermind, just, sort of answered my own question. Doesn't work on XP, but using a Win 7 'puter I was able to use Shutter Count, which now works w/ the 7D Mark II.

How can I get the skip count to work on my iPhone?

I continue to keep looking for the answer to this question however, it's seems that I continue to keep running into a wall. I have several of my smart playlists that rely on monitoring the skip counts. I never had an issue until I upgraded from a touch to an iPhone. What's the deal? This phone can do everything and anything imaginable but it can' keep a skip count. Has anyone figure out how to fix this, or am I going to be waiting like everyone else for apple to fix the issue? Help!!!! This is frustrating.

I Cannot use the meddle button on my p
iPhone

How can I get the open counts on file type items?

One of the managers' point of interesting on Portal usage is to know how frequently items are opened to view.
I need to preapre a report to show managers which items (file type) are opened most frequently? and who opened the item most?
How can I do it?
Thanks,

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Are you saying that you bought a used or second hand Mac? In North America an open box Mac usually refers to a display model used in a store.
There is mixed info on this issue. Some folks in the US have called Apple Care and requested that the iLife apps prebundled with this specific Mac be released from original owner's Apple ID so the new owner can Accept the apps into their Apple ID, with success. Folks in Europe report that when making the same request of Apple Care they are met with resistance and are unsuccessful.
YMMV
The sad thing is that if Apple Care will not release the apps, then the owner of a second hand Mac cannot even purchaase the apps on their Mac! To buy the apps with their own account, they would need to find an older Mac running at least OS X Snow Leopard 10.6.8 with a Mac App Store (MAS), that also has never had the MAS versions of the iLife apps installed on it.

File Adapter - how to get the file count from a folder

Hi All,
I have a requirement that have to poll a directory when the file count is reached to number N (ex:number of files avilable in folder is 5) otherwise it should wait and not pick any of the files. Is it possible to get the file count from a folder using file adapter ?? otherwise please suggest me an approach to achieve this requirement.
Thanks,
JJ

Hi Sarath,
Thank you for your reply.
Go with the list files operation of file adapter it will gives you the number of files in the specified folder as you given. . - this step is already done.
When the number of files reaches your count startup your webservice that which can polls the files. . . - how can i acheive this?? Have to poll the directory and process the number files - please let me know, what could be added to the webservice which is being invoked after cheking file count from parent process.
The reason for the above question is - we cannot use ReadFile operation in second webservice because it will be automatically triggered when the file is avilable. Also SyncRead operation supports reading one file in b/w bpel process. Kindly explain me the implementation steps.
Thanks,
JJ

How to get the row Count of a ResultSet

How to get the row Count of a ResultSet

Hi
I'v tried rennie1's way ,but I only get zero,my code is:
rs.executeQuery("select count(*) from t_test");
if (rs.next()) int rowCount=rs.getInt(1);
I also tried barni's way ,but the method rs.last() and rs.beforeFirst() throw a same Exception
I tried another way,the code is:
while rs.next(){
// Do nothing ,just move the cursour to the last row
int rowCount=rs.getRow()
However,the rowCount still equal zero
Any help would be greatly apprecite!
note:
I get connection by DataSource's JNDI name from client, the Server is Weblogic Server 6, the DBMS is Oracle.

How to get the FILE COUNT from File directory

Hello,
i have to develop a scenario like, get the file count from source file directory and validate whether the file count is 5 or not. if 5 files exist i need to process those 5 files to DB tables. if file count is not equal to 5 then i need to send a mail to customer that files are missed at source directory. (subject as files were missed at source directory and in content i need to display the file names exist at source file directory. So that missed file will be generated by the customer based on this mail).
Could you please let me know how to get the count of files from source file directory. if it is possible only with UDF please provide the Java code
Best Regards,
SARAN

Do these files have some fixed names?
Can you try to use the option Advanced Selection For Source File to make XI pick all 5 files in one shot?
Check this blog on the same -
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
If this is not a option - BPM sounds the only possible way.
Regards,
Bhavesh

How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?

Hello,
I am developing a test stand to test tires. We have LabView 7.1 and the SCXI chassis with an 1121 transducer card. I am trying to count the rate and total number of revolutions made by the tire. The signal is acquired from a 12V-proximity switch that is actuated once per RPM. The tire turns at 1,000 RPM or a little more.
The signal will have to go through a 100-foot cable to get to the LabView chassis, will this be a problem?
How do I get the 1121 card to read the switch and make it a 1 or 0 to count pulses?
Will LabView be able to read this many pulses per second?
How do I get MPH and a RPM reading out of it?
Thank you,
James Happe

Hi James,
Since you are cabling your DAQ board to an SCXI chassis with an 1121, you will not be able to use your counters without additional hardware.
The 1121 is an analog input signal conditioning module. It performs filtering and attenuation to help measure analog signals. What it does not have is access to your board's counter pins.
In order to use your counter pins you will need to get the necessary hardware. You have two options:
1) Buy and SCB-68. This is a breakout box that will cable directly to your DAQ board replacing your SCXI chassis. You can connect your signals directly to your counter with this. However, I would advise against this because your application has a 12 volt signal. This will overload the 5v maximum voltage for your counter pins.
2) Buy a 1180 feedthrough panel. This will allow you to use all of your DAQ board's functions with the SCXI chassis. Withouth the 1180 feedthrough panel, the SCXI-1121 is the only thing connected to your DAQ board. Since the 1121 only performs conditioning on the analog inputs, that is all you can access. The other pins cannot be used (no access). With the 1180 feedthrough panel, you can put a connector block on and access all of your other pins (including the counter pins). Again, I would advise against this since your 12 volt signal will overload your counter pins.
My suggestion would be to perform an analog input task. Set up your 1121 in MAX and use a LabVIEW shipping example. In the shipping example select an analog input channel from your SCXI-1121 module. Set the appropriate voltage range and take some measurements. Once your signal is connected and you can read it using an analog input example you are half way there.
Take the analog input shipping example and modify it to perform frequency analysis on the voltage readings. You can simply wire the data from the DAQmxRead VI into one of the frequency analysis VI's (noted in my first post). The output if that VI will give you the frequency of your signal.
-Sal

How do you get the count of number of checkbox selected?

hi,
plz tell me how do you get the count of number of checkbox selected?

Not sure what you are doing so I will attempt to answer your question. If have one question which can have multiple answers you have will recieve an array so you have to do getParameterValues("name") and move it into an array.
If you have multiple questions and only value will be selected do a getParameter("name") on each form element.
HTH, if not provide more detail.
J.Clancey

How do I get a page count from the HP Photosmart 5514?

How do I get a page count from the HP Photosmart 5514?

Simple. Access the printer web gui by typing in the printers IP address into your browsers address bar. Select Tools/Usage reports. Done.

How to get the column count at the bottom of the column

Hi Friends,
How to get the column count at the bottom of the column
Thanks
Raj

You mean row count? Add another column, click on the fx button and type RCOUNT(1).
If you want just the total you can make it MAX(RCOUNT(1)), hide this column and then add a Narrative View after your report and enter "Total Number of Records: @n" where "n" represents what order your column is from the left side.

SharePoint 2013 Rest API - How to get the item count with startsWith

Hi All,
I am using the below url to get the item count for specfied startsWith. For example I want to know how many items are there in the list which starts with "A". When i hit the below url in the address bar i am getting HTTP not found.
siteURL/sites/Apps/SharePointApp3/_vti_bin/listdata.svc/SampleList/items?$filter=startsWith(Title,’A’)
Navaneeth

what
is SharePointApp3.
here.
it is a webpart.
this will not work on webpart\apps
Also I am not sure if it will work with specific SampleList
Try
siteURL/sites/Apps/SharePointApp3/SampleList/_vti_bin/listdata.svc/Keywords?$filter=substringof('r',Title)
If this helped you resolve your issue, please mark it Answered

How to get the record count printed for the report in the Dashboards

Hi,
I would like to get the record count printed at the bottom of every dashboard report like:
< 1 - 25 of 6300 > instead of < 1 - 25 >
Any help is appreciated
Regards
B

I have tried the following formula which identifies the lowest grain but it does not seem to give me correct result.. I am not getting the correct count. I am getting as 3.A work order can be updated only once at one point of time.hence the formula
MAX(RCOUNT(CAST("SR Wo Fact"."Crm Wo Number" AS CHAR) ||CAST("SR Wo Fact"."PSC Timestamp" as char)))
I tried only MAX(RCOUNT(1)), but I was able to get the record count as corect for Administrator but not for other users.
Has anyone come across this scenario.
Thanks Shravan
Edited by: 786443 on Aug 19, 2010 10:22 AM

Unable to get the row count of supplier site for each supplier

Hi,
In the sourcing module, suppliers page is having an advanced table in which there is a field 'supplier' and another filed 'supplier sites' (supplier field is of type picklist).Now, how can i get the count of 'supplier sites' for each supplier???

Hi sumit,
Thanks for the reply, can u please help in writing the code to loop through the VO...
I was trying to get the first row and then finding the count of supplier sites, but in each iteration of for loop(for each row) i am getting the same count value for each and every row...
Code :
int j=vo.getrowcount();//count of no. of rows
for (int i=0;i<j;i++)
row=(xxVORowImpl)rowsetiterator.getRowAtRangeIndex(1);
int a=am.getSupplierSitesVO.getRowCount();//this is the view object in the pick list
oapagecontext.writeDiagnostics(this,"value of a is :"+a,1);
this code is giving row count of last row of supplier.
How to get the count for each and every row of supplier sites ?
Thanks.

How do I get the applicationbadge count to include subfolders?

Similar Messages

Maybe you are looking for