How do I get the arrow to record during a Keynote recording?

OS: 10.7.5
Keynote ver: 5.2
I need a pointer during my Keynote presentation recording. However, the pointer does not record, even though I can see it during my recording session.
How can I fix this?
Thank you.

Keynote does not run on Windows computers, therefore, convert the Keynote file to PowerPoint:
      File > Export > PowerPoint

Similar Messages

  • How do I get the arrow keys to move one character at a time in the address bar or search box?

    I can no longer get the arrow keys to advance or retard "one character at a time" in the address bar, the search box, or on any form in Firefox. This feature works in other browsers without a problem. The "Home" and "End" keys do not work either. How do I fix this behavior?

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • Mouse arrow has changed to straight line - how do I get the arrow back?

    Help! When I sat down to use my computer yesterday, I noticed the mouse arrow that is usually there has changed to a line (similar to a curser in a word document). I want to change it back to the arrow, but am unsure how. I'm hoping it's just a setting one of my kids has messed with. It's frustrating because the grey line is difficult to see unless the screen is white. If anyone knows how to fix this, please let me know. It is only happening on my account (the admin acct.). My kids accounts still have arrows.

    "I'm hoping it's just a setting one of my kids has messed with."
    Did you ask them?
    Trashing the mouse preference may help.
    Home>Library>Preferences> com.apple.driver.AppleHIDMouse.plist
    Restart your computer.
    !http://i45.tinypic.com/jl0z95.jpg!

  • Arrow pointer in appleworks 6 paint changes to pencil. How do i get the arrow pointer back?

    I have never really used the program before, but it was working fine, and I have no idea why it is not working properly.
    All of the following have failed:
    I tried double-clicking on the arrow in case there was some 'sticky' issue.
    I opened and closed the program.
    I opened a new paint file.
    I rebooted the mac.  I ran 'cocktail' s/w with the daily maintenance script in case there was something stuck in the buffer.
    All the other items work correctly: I can add text, add circles, use the eraser, etc.
    This is a good usage example of the problem:
    when i add text and then click on the arrow to move it, as soon as i click in the canvas area, the pointer immediately switches to the pencil!
    I am both baffled and aggravated!

    Hi Peter,
    The Selection Tool (Arrow) really has no use in a 'pure' paint document. Its purpose is to select frames and other objects, and Paint does not create any of those.
    A Paint document consists of a sheet of 'canvas' on which you can apply a selection of colours. There is no 'text' in a Paint document, except when you are entering it. While you are still typing, it is possible to add a letter by typing it or delete a letter by pressing the delete (backspace) key. As soon as you click the mouse, though, the 'text' becomes part of the painting, a pattern of coloured dots that your eyes and brain can interpret as 'text,' and ceases to exist as a collection of actual characters.
    The Selection tool doesn't work, because there's nothing for it to 'select,' and AppleWorks automatically switches to the pencil, a tool what will work in the paint environment that you entered by clicking on the canvas.
    Paint's selection tools are the Marquee (the dotted rectangle about half way down the Tools Palette) and the Lasso (beside the Marquee.
    Regards,
    Barry

  • How can i get the history that was deleted or not recorded on the computer

    I want to know how to recover deleted history or activity that had the computer set to never remember the history.

    You can't. If you had a backup of the places.sqlite file from before deleting the browsing history, you could restore that file. As far as "never remember my history", nothing is saved or "recorded".

  • I cant get my back arrow or forward arrow back since i updated the firefox like it told me to when i sent crash repot now how do i get the arrows back?

    firefox kept crashing so i sent a report i was told to update firefox and i did so, now the back arrow and the forward arrow is gone and i cant put them back on the toolbar i even went to settings what do i do??

    Hi mud4x4,
    Try going to ''View > Toolbar'' be sure that the navigation bar and the bookmarks bar are checked.
    You might also want to look at [https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing this article].
    Hopefully this helps!

  • How do I get the arrow to show up on apple maps?*

    It just follows the dot

    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Messages/Attachments
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, press command-F to start a Spotlight search. Search for items in "Attachments" of kind "Image." Does anything show up?

  • How do I get the built in microphone to work on my IMac?  Camera works fine, but I can't record voice.

    How do I get the built-in microphone to work on my IMac?  Camera works fine, but I can't record sound.

    I always assummed that the mic was part of iSight (intertwined?).  The mic is situated right next to iSight.  It would seem to me the solutions would be the same some what.
    Regarding the OP, I also suspect his/her problem is hardware.  It's rather unusual for the internal mic to not work yet the iSight does.

  • How can I get the meeting record in my personal workspace?

    Dear All,
    Does anyone know how can I get the beehive conference meeting record in my personal workspace?
    The recording message looks like below:
    Recording Location: st > [email protected]'s Personal Workspace > Documents
    Any comments will be highly appreciated!

    Hi,
    Is the problem getting the file to be saved in your personal Workspace or accessing the Personal Workspace to get the recording?
    Phil

  • How can I get the previous record's field value in a VO

    Hi I would like to know how can I get the previous record's field value in a VO
    For example : I have a VO porequisitionlinesvoimpl, and it contains 5 records (porequisitionlinesvoimpl.getRowCount() = 5). How can I search all records in the VO and get the field (attribute3) for all records?
    Many thanks anyone can help
    Lawrence

    Hi ,
    U can loop through the VO to get the value of attribute3,
    need to extend the controller ,use below code
    OAViewObject vo = (OAViewObject)oawebbean.getApplicationModule (VO1);
    OARow row = null;
    int fetchedRowCount = vo.getFetchedRowCount();
    RowSetIterator Iter = vo.createRowSetIterator("Iter");
    if (fetchedRowCount > 0)
    Iter .setRangeStart(0);
    Iter .setRangeSize(fetchedRowCount);
    for (int i = 0; i < fetchedRowCount; i++)
    row = (OARow)Iter .getRowAtRangeIndex(i);
    String value = (String)row.getAttribute("Atrribute3");
    Thanks
    Pratap

  • How can i get the rowNumber of a record in a table ?

    How can i get the rowNumber of a record in a table ?

    Marcel,
    Please consult the "Tables" chapter in the UIX Developer's Guide. You can search for a method titled "doSelectionEvent" that will indicate how to deal with table selections.
    Hope this helps,
    Ryan Pollock

  • TS1424 My recent downloads was not complete, song & videos stopped short of end of song or video. How do I get the entire recording without purchasing them again?

    My recent downloads was not complete, song & videos stopped short of end of song or video. How do I get the entire recording without purchasing them again?

    you will probably need to recreate your itunes library to get the complete song. view the article on how at apple.com/support and search for HT1451

  • We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

    We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

    My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
    (PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
    Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
    Hope it helps.

  • How to get the arrow keys to work in 2D game?

    I am designing a 2D game (Applet) in which the objective is to move a dot from one end of the room to the other.
    how do i get the dot to move in all 4 directions, please help.
    If you may, please mention a few EXCEPTIONAL tutorials on JAVA game design.

    The best (?) way is to use a KeyListener. http://java.sun.com/j2se/1.4.2/docs/api/java/awt/event/KeyEvent.html
    In the class that you want the keyevent to occur, put this in your class declaration implements KeyListener { Then somewhere in that class, put addkeyListener(this);. You need to have three methods in this class - keyTyped(KeyEvent e), keyPressed(KeyEvent e) and keyReleased(KeyEvent e).
    Here's a sample.
    public class Example extends JFrame implements KeyListener
         //some code goes here...
         public void keyTyped (KeyEvent event) {}
         public void keyReleased (KeyEvent event) {}
         public void keyPressed (KeyEvent event)
              int key = event.getSource();
              if (key == KeyEvent.VK_UP)
              //etc.
    }

  • I need a prior version of firefox...version 1.5 because my payroll department software is not compatible with firefox 6.0... how do I get the other - older - version ??

    my payroll department uses eSAP payroll program. It is NOT compatible with your new version...6.0. I need your older version 1.5 so i can access my payroll records. I am currently being forced to use Internet Explorer and I absolutely HATE that software.
    please help !!! How do I get the older version? Version 1.5 - thank you.

    I would hope the problem is that Firefox 5 is not compatible with some of McAfee's additional add-ons. It will be rather worrying if it has a problem with the McAfee security programs themselves. Please state exactly which software and version you are having problems with.
    There are known issues with McAfee's Site Advisor [/questions/839953#answer-205178] but it is hoped McAfee will solve that in a few weeks.

Maybe you are looking for