How Do I Get the Best Range with the Express?

What settings should I use to get the best range with the express? What Radio Mode, Multicast Rate and Transmit Power should I use? What is the estimated area that this will cover?

+What Radio Mode+
802.11g only would be a good compromise. Here I am assuming when you say that you want the best range that you do not care if better range means lower network speed. Everything in wireless is a trade off. You cannot gain something without giving something else up in return.
+Transmit Power+
100%
+Multicast Rate+
No effect on range, but a good idea to use a lower setting in general
+What is the estimated area that this will cover?+
Not possible to predict without knowing a whole lot more about how many obstructions will be in the signal path, what they are, the construction of your home, other wireless networks and cordless phones around you, etc. and many other factors. Please tell us what you are trying to do with as many details as possible.
Message was edited by: Bob Timmons

Similar Messages

  • When using logic's arpeggiator, how do I get it to resart its cycle from the root of a new chord instead of resuming its cylce in the same range with the new notes?

    I'm arpeggiating A minor over a number of octaves and I want to switch to D minor before the cylce is over. However, I want the d minor to start from the lowest note that I'm playing as if it were a new cycle. What it does instead is continue the cycle, but uses D,F,A instead of A,C,E.
    If Logic's arpeggiator is not capable of doing this, can anyone recommend a third party arpeggiator that can? (hopefully cheap/free)
    Thanks.

    You need to make sure to give a clean break between the two chords, if any notes are not completely severed between the chord changes the pattern continues from the first chord.  Kind of how in a synth when set to legato it doesn't re-trigger the envelope if the notes run together.

  • I want to use Softcard on my Note 4 but I signed up for it with T-mobile first. How do i get to log in with the same account with my Verizon phone?

    I signed up for Softcard while i was with T-mobile but now have left and want to use the same account with my Verizon account but i get some Error message. Cant MNO or something

    It is a bit annoying     when Verizon , ATT and T mobile are all using the same service with Softcard.  But if Google wallet is working for you keep it. 

  • My ipad lost it's connection with my printer. How can I get it to reconnect with the printer?

    My iPad lost it's connection with my printer. How do I get it to reconnect?

    1. Reboot iPad
    2. Reboot router

  • When I buy a pre order song how do I get it to play with the rest of the CD?

    When I buy a pre-order song from i tunes, and then purchase the CD the song was from it will not play with the rest of the CD.
    Example: Tori Amos's new CD Unrepentant Geraldines
    I purchased the single Trouble's Lament when it was released, before the CD.
    I just purchased the CD and the song should be #2 on the CD, but its not there, it is listed separately, and will not play with the CD.
    Also, other issue... Free U2 CD, it says its in my Library when I clicked on the CD add in the store. It's nowhere to be found in my library!! I really would love to listen to it since I have several of there CD's and am a big fan
    If anyone can help with either of these issues , I would greatly appreciate it.

    For the single, if you select the track in your library and do 'get-info' (control-I) on it and select its Summary tab on the popup are its details (e.g. album name and artist) the same as for the other tracks on the album ?
    For the U2 album you should be able to download it into your library by ticking the 'show iTunes in the Cloud purchases' tick box on the Store tab in iTunes > Preferences - it should then show in the Music part of your library with a cloud icon against it for downloading (downloading the booklet for it this way may not work, you may get a 'corrupt file' message when trying to open it, though that might have been fixed by now).
    Or go to the Purchased link under Quick Links on the right-hand side of the iTunes store homepage and you should be able to download it from there.
    A third option is to sign out of your account (Store > Sign Out menu option), find the album in the store and then click on its free 'price' button - you should then be prompted to sign back in and the album should download.

  • How can I get Recipefox to work with the latest version (16) of Firefox?

    Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

    Hi,
    You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
    [https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
    If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • How do i get firefox to open with the same window size every time, even if the last instance I had open had a different window size because I resized it??

    My firefox opens new windows with a size that equals the current window I have open, or if I have no window open, the last window I closed. I would like to have it open windows the same size every time, regardless of what size the current window is, or what size the last window I closed was. I cannot find a setting or addin to do this anywhere. I have resizer which lets me change the size, but it is annoying that I can't have a default size for windows being opened. I open windows in new windows, not tabs.

    Open link/bookmark in new tab in same window:
    *Middle-click (press the mouse scroll wheel) the link
    *Ctrl+left click the link
    *right-click the link, choose "Open Link in New Tab"
    Open link/bookmark in new window:
    * Shift+Enter on the link
    * Shift+left click on the link
    See: http://www.7is7.com/software/firefox/shortcuts.html

  • Help, How do i get objects to move with the click of a mouse button?

    I am developing a game where by an object can move around the screen by either using the keyboard or the mouse. I have figured out how to control the object using the keyboard. But the mouse control is proving difficult. Can anyone give me some suggestions on how to tackle this?

    This is better !:
    import java.awt.*;
    import java.awt.geom.*;
    import java.awt.event.*;
    public class MoveO extends Frame implements MouseListener
         Label obj = new Label("@");
    public MoveO()
         setBackground(Color.pink);
         addWindowListener(new WindowAdapter()
        {     public void windowClosing(WindowEvent ev)
              {     dispose();
                   System.exit(0);}});
         setLayout(null);
         add(obj);
         obj.setBounds(110,130,20,20);
         obj.setBackground(Color.red);
           setBounds(1,1,600,460);
         setVisible(true);
         addMouseListener(this);
    public void mouseEntered(MouseEvent m){}
    public void mouseExited(MouseEvent m) {}
    public void mouseClicked(MouseEvent m){}
    public void mousePressed(MouseEvent m){}
    public void mouseReleased(MouseEvent m)
         move2(m.getPoint());
    private void move2(Point mto)
         Point ofr = obj.getLocation();
         Line2D.Double line = new Line2D.Double(ofr.x,ofr.y,mto.x,mto.y);
         Rectangle2D.Double r = new Rectangle2D.Double();
         r.setRect(line.getBounds2D());
         if (mto.x >= ofr.x) 
              for (double x=0; x <= r.width; x++)
                   for (double y=0; y <= r.height; y++)
                        if (line.ptSegDist(r.x+x,r.y+y) < 0.25)          
                             obj.setLocation((int)(r.x+x),(int)(r.y+y));
         else
              for (double x=r.width; x >= 0; x--)
                   for (double y=r.height; y >= 0; y--)
                        if (line.ptSegDist(r.x+x,r.y+y) < 0.25)          
                             obj.setLocation((int)(r.x+x),(int)(r.y+y));                
    public static void main (String[] args) 
         new MoveO();
    }Noah

  • In an iPhoto slideshow how do I get it to start with the first image?

    It seems as if the slideshow starts with a ramdom image.
    Is there any way to have an i:Photo slieshow start with the first one in an album?

    When playing a slideshow directly from an album the show will start with the first photo in the album unless another photo is selected.  In that case the slideshow will begin with the selected photo.
    There's also an setting pane for the album slideshow with an option to randomize the photos with each playing.
    Make sure the Shuffle checkbox is not selected.

  • What are the best sequence presets and settings to use in FCE for the best resolution with the least amount on strain on computer?

    Hello!
    Can someone please help me figure out the best settings to use in order to obtain the best resolution in FCE4 for a television show that is going to be sent out on full size Sony DVcam tapes, with 4:3 aspect ration and audio output at 48kHz? I am currently working with mixed media sources in Final Cut Express, and I am wondering what the best settings (presets and preferences) are, in order to provide the HIGHEST resolution possible, while putting the least amount of strain on my computer system?
    I am importing mini DV-standard definition footage and still photos (from Canon Rebel camera, HD CMOS Canon camcorder that records in 1440x1080 at 48 kHz, and cell phone photos). For voiceovers I use the tools in FCE.
    I use Voltaic (which I use thanks to recommendations from Apple discussion boards, love it!)  to convert the footage from the HD CMOS-Canon HD VIXIA (HG 20) camera, and then I am using print to video to output onto Sony DVcam tapes (full size). This is for delivery for a television network that broadcasts in Standard Definition, so I need to produce the highest resolution and best quality possible that also puts the least amount of stress on my computer system.
    If anyone has any recommendations, help, or sources that can help me answer this question I would be greatly appreciative.
    Thank you!
    Susan Kayne

    This is happening because your video clip properties do not match your sequence settings.  This is always a problem when you try to insert video from multiple camcorders/cameras (that use different video codecs, frame sizes & rates) in a single sequence. 
    It will help a lot if you provide more specifics - what FCE easy setup did you use to create your sequence?  For your DV footage, are you using standard 4:3 DV or anamorphic 16:9 DV clips?
    If you plan to export to standard def (DV/DVCAM) and are mixing DV from a miniDV camcorder, stills, cell phone images and AVCHD then I would suggest that you use the DV NTSC easy setup for your sequence.  Use MPEG Streamclip or similar utility to convert your non-DV video (your AVCHD video) to QuickTime/Apple DV-DVCPRO NTSC.   Then all your video will match your sequence settings.  Yes, you will have to crop the AVCHD footage to 4:3 and you can do that in MPEG Streamclip.

  • How do you get mod_perl to work with the bundled apache2?

    I have read a few reports on how to get DBD perl working and some people talk about compiling apache 2 and mod_perl, but I want the standard apache2 which is running smoothly with my php install to handle perl too.
    Can someon give me a list of commands and steps to do and run to get this working? I know php, a bit of C have compiled before but allways forget how it is done. I have no problems editing httpd.confs or php.inis so probably perl's configs and configure files won't be a problem. Thanks in advance.

    Thanks for the thought etresoft. I did not find it in the httpd.conf as an so module to be enabled, so I presumed it was nowhere to be found. But it seems it is in the /usr/libexec/apache2 folder just like all the other modules, find found it .
    I just added this to my httpd.conf and now it is working:
    LoadModule perl_module libexec/apache2/mod_perl.so
    Alias /perl/ /Library/WebServer/Documents/perl/
      <Location /perl/>
          SetHandler perl-script
          PerlResponseHandler ModPerl::Registry
          PerlOptions +ParseHeaders
          Options +ExecCGI
          Order allow,deny
          Allow from all
      </Location>
    I was stuck mentally it seems. Thanks for the bump.

  • How do you get the best Range?

    How do you get the best range on the Extreme? I am very unfamiliar with the settings and what they mean.

    The default settings on the AirPort Extreme are set for maximum radio power so it will produce the best range without further adjustments.
    The actual range of the device will depend on the number of obstructions in the signal path between the AirPort Extreme and the other device that is connecting to it.

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • In my music i have lost the column right with the alphabetic order ... how can i get back ?

    in my music i have lost the column right with the alphabetic order .. how can i get back ?

    Hello Camcam369,
    It sounds like you are not seeing the alphabet listed on the right when perusing songs, artists, or albums in the Music app.  I recommend a couple of steps you can take to get it back.
    The first thing I recommend is quitting and relaunching the applications on your iPod touch:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    You can find the full article here:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still seeing the same issue after quitting and relaunching the Music app, I recommend restarting your iPod and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, the last thing I recommend is backing up and restoring your iPod touch:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

Maybe you are looking for