How do I get the converted ProRes file into my timeline?

Having done a quick test editing AVCHD natively I decided to transcode to ProRes and try that.
So I imported a new AVCHD clip after ticking the "Optimise Media" box and the clip was duly converted and appeared in the Event Folder on my scratch disk.
However, when I select the clip in the Events window of FCP X or in the timeline and select Info in the Inspector it reports that the clip's codec is H.264, Linear PCM.
What's going on?

I have similar issue. I use XDCAM EX and when I tried to optimize. Reveal in finder still shows EXDCAM EX. When I import a clip without optimization the option to transcode is grayed out. So I guess that FCPX will not transcode to ProRes probably because there is no need to.

Similar Messages

How do I get the converted PDF file to look the same in Word as it did in PDF?

How do I get the converted PDF file to look the same in Word as it did in PDF?

uscmagz wrote:
> I took the High Speed Data Reader.VI and added the Write to
> SpreadSheet.VI. Shouldn't that be able to write the converted data to
> file? What am I overlooking here. I am attaching a screenshot!
Watch out with Excel. As you use the High Speed Recorder to create the
original file you will most probably create quite large files quite
fast. Translating that into an ASCII spreadsheet would work fine in
LabVIEW but Excel has a limitation that it can't open spreadsheet files
above a certain number of rows. I do believe this is around 64k rows but
it does a little vary depending on the number of columns you have.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How should we get the out put file-name same as in put file-name in file to

Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.

Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh

How do I get the Converting to Adobe PDF process to stop hanging?

I installed Adobe Acrobat 8 Professional on a machine running Windows 7 Professional 64bit. I have tried creating PDFs from MS Office files (using the Acrobat PDFMaker toolbar). I have also tried printing to Adobe PDF, from within MS office but also elsewhere (e.g. IE, Notepad). No matter the creation method, I am prompted for a file name and location and then the Acrobat PDFMaker window appears with a taskbar and message "Coverting to Adobe PDF..." The process hangs there and a print job appears in the Adobe PDF printer with a status of "Error - Printing." How do I get the process to stop hanging and successfully create PDFs?

FWIW, a former colleague was also frustrated with this "Error - Printing" hang-up problem, when printing from any app to Adobe PDF, with Acrobat Pro 9.3.0 on a Win7x64 system. I recall forum threads on that issue, with no clear resolution?. What did work on every print job, though, was the two-step method: (a) Print to File with Adobe PDF, then (b) fire up Acrobat Distiller 9 to convert the intermediate .prn Postscript file. (It would seem that Acrotray wasn't functioning properly in a x64 environment?...though it did run as one of the pc startup processes)
As that two-step method was acceptable for his workflow, he never explored the possibility of getting a fluent one-step PDF creation by upgrading to the highest available v9x version, or beyond.

How can I get the directory.xml file for WL6.0?

I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?

aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM

How do I get the videos in iPhoto into a thumbnail in iMovie

How can I get the videos that are in an iPhoto album to a thumbnail in iMovie when thumbnail does not appear? I have a early 2009 24" iMac and using iphoto 11.

Are you saying the the movie in iPhoto doesn't show a thumbnail or that it doesn't have a thumbnail in iMovie? If the latter then ask in the iMovie forum.
If the former then we need more information:
what exact version of iPhoto are you using?
what system version are you running?
what do you see in the iPhoto window when viewing an Event containing the movie in question?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

How do I get the itunes stored files on my computer to store by album name not by artist?

How can I get itunes to store my computer music files by album name not by artist? It's a pain retreving a stored album from my external drive.

Are you sure to have the full length file in the library? If you start playing it, will it show the full runtime on the controls?

How can I get USB camcorder MPEG2 files into iMovie

I have a G4. The version of iMovie that will allow a direct connect of my new Panasonic 60 GB camcorder won't work on my older mac. Does anyone know of a way that I can get the MPEG2 files (they don't look like MPEG2 files) off of the hard drive of my camcorder so that I can get them into iMovie. I am able to mount the camera's hard drive and can see all the files. They have .mod and .moi extensions on them.

First you need the MPEG-2 Playback Component from Apple (19,99$). Then download the MPEG-Streamclip from the internet.
Copy the mod-files at your Mac (you don't need the moi). Open Mpeg-Streamclip and drag the mod's in the application. Convert all files to dv.
Sorry for the bad english.
Message was edited by: schmerre
Message was edited by: schmerre

I am unable to reply to your e-mail convermation--how can I get the URL to past into my browser?

Received a confirmation e-mail requestion me to reply to it and I cannot get the URL to paste to my browser--how can I do this???????/

Hi June,
Sorry for the trouble you've had.
I've verified your account on our end and you should be able to access the ExportPDF service now.
Please let us know if you have any questions!
-David

Hi - replaced my old computer but did not copy over library. How do I get the music on Ipod into new library?

Hi - replaced my old computer but did not copy over library. How do I get musci from ipod to computer "library" so it can then go to Iphone. Drag and drop does not do it.
thanks
g

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How do I get the Device link back into the left column so I can update to iOS 5. Don't know what I did with it.

The Device link on my iTunes is missing. How do I get it back into the left column?

Top Sites, you mean? You can instruct Safari to open these in the General section of the preferences.

How do I get my book/pdf files into and out of iBooks?

There was a time when I my iBooks App appeared under the shared files section of my iPad app list, and when it did I could get my books/pdfs from my ibook App to my iTunes on my PC and vice-versa. But iBooks no longer appears in that list so I can't transfer new books/pdf files to read on my iPad. The iBook App is still on my iPad with all the old Books and FTP files, it just does not show up under the list of apps whose files can be shared. What must I do to get that functionaity back?

Okay Chris, thanks. I may have misremembered getting the other pdfs via the shared conduit. I may have dragged them from my PC -- it's been a long time since I used this system.
One more thing. Somewhere along the things I was doing recently I asked to sync the Books. It was then that I received a message that more than one library was synced to this iPad! It asked whether I wanted to erase this iPad and sync with the current iTunes library! I did change my Apple password a few days ago -- could that explain it? It could explain why only some of my books are visible in iTunes. But I don;t want to erase my current iPad!
I think I will exit and go back in again afresh.

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those clips in Organizer. I can do that in Premiere Elements 12 and save them as "Projects" - but how do I get the divided clips back into Organizer?

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those single clips into 2 or 3 separate clips, each shown separately in Organizer. I can divide the clips in Premiere Elements Editor 12 and save them as "Projects" - but I can't find any way to get those divided clips back into Organizer. Does anyone know whether that can be done? Many thanks for your thoughts.

What about Google Drive? And just share the folder with the family members.
Erick

How do I get backed up Aperture files into my new iMac correctly?

Here's the deal. My 4 year old iMac HD failed. My the Time Machine backup software in the Time Capsule was somehow corrupted so I could't just restore or Migrate the files to my new iMac. I was able to retrieve the actual "Pictures" folder from my TC. Temporarily I have placed them in a folder on my new iMac's desk top. I reloaded Aperture 3 and am now wanting to be able to populate Aperture as it was before with my photos with photos that have been post processed showing all of those changes...etc. Is it as simple as moving all of these files to the new iMac's "Pictures" folder in my User? I don't want to mess this up!
Thanks for any help!
Greg

Hello Greg,
that looks like you imported some of your masters as referenced. You best put those folders in exactly the similar position inside the Pictures folder as you originally had them on your old drive.
Then use Aperture to consolidate them into your new library.
First you need to reconnect them to the versions:
That is best done by creating a smart album that contains all images that need reconnecting: Define a smart album with the rule: File status is offline (or missing), depending on what you see.
Then select all images in that album and select "File -> Locate Referenced Files" from the menu.
You now should see a dialogue that shows the images that need reconnecting in the upper part of the window, and a file chooser in the lower part.
In the File chooser select the coorect master files corresponding to the missing files in the upper part of the window.
If you are lucky, the reconnect all button will become active and you can reconnect your masters.
Léonie

How to I get the Macintoch HD file to my desktop?

I want my Mac HD file to be on the desktop? how can I do that?
Kindly let me know

Finder menu > Preferences > Sidebar
-mj

How do I get the converted ProRes file into my timeline?

Similar Messages

Maybe you are looking for