How do i get the idvd program to cary out onestep dvd feature

one step dvd feture on my idvd program will direct me to take certain actions, then will only repete the directions after i have completed the actions.

Tracy Rapier wrote:
I see the controler but not in full screen mode
⌥⌘C to show or hide controller, in Full Screen mode or not.

Similar Messages

  • How can i get the content of JTextArea with out loosing Indentation.

    I am developing one mail sending application. I am getting mailid , from address, mail body from one Swing. In one JTextArea i am typing i have typed some matter. When i call the content of JTextArea using
    jtx.getText() method, i am getting all the content as one paragraph. That means there is no indentation which was there in TextArea.
    Please provide me some solution how can i get the content of JTextArea wiht out loosing indentation.

    And it was you who asked the question!

  • How do I get the iTunes program to go to a particlar site to obtain the music that is on an external hard drive

    I have reinstalled iTunes after a small calamity, but I had a backup file of all my music on an external hard drive. Question 1. Where does the program find the music as what has come up is not complete? Question 2. How do you get the program to look in a particular drive for the music that is there?
    Cheers

    Where are you trying to put the folder? At the top level of the volume? That top level is only writable by the system (or an authenticated admin, which is why it's asking for your admin password).
    If you are trying to move into a folder, repeat the "Get Info" on the folder into which you are trying to move. You want to see that your current account has "Read & Write" privileges.
    Yes, third-party NTFS drivers can affect the behavior of volumes they control. (One could say that is the whole point of their existence.) They are supposed to be act just like native volumes, but they don't always succeed. I have no specific knowledge of whether Tuxera NTFS drivers would cause the problems you are seeing; I use a different brand..

  • I paid for the annual subscription for lr and ps. when i download the programs it showed me using the trial version which has now expired. how do i get the full program i paid for?

    I paid in full for one year for lr and ps. Both apps show as a trial version and ps is now expired. How do I get the full use of the programs I paid for?

    Moving this discussion to the Adobe Creative Cloud forum.
    Oclan and Cesarguez if you have a valid membership and it is not being authorized then there is likely a connection failure between the computer and our servers.  Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection failure.

  • How do I get the Messages program on my Macbook Air to work properly?

    When I use the Messages program on my computer (I have a Macbook Air), it does not receive all of my iMessages... It will get some of them, but not all of them. Is this normal?
    For example, it will receive messages from someone I am already messaging on my laptop. But only if I keep replying on my computer. It seems if I reply on my phone for one message they stop going to my laptop.
    I do NOT get new messages from other people. I have to write to them First on my laptop.
    I also hate how it doesn't update.. It only shows convos that were on the laptop. Not on the phone AND laptop.
    Just wondering if there is anyway to make them work simultaneously! Thank you to anyone who answers!

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
              Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
              Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
              Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test.
    Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

  • How do I get the calling program?

    Hi,
    I have been using a function module for a long time which is called by quite a number of programs. Now I want it to react differently dependent on the calling program.
    I could use a new optional parameter of course transferring the program id. In that case I have to change quite a number of programs.
    I was just wondering if there is a possibility to get the information of the calling program on the fly. (In the debugger you can find your calling program easily in the 'call stacks'). Does anyone know how to retrieve this information?
    Thanks in advance.
    Regards Johannes

    Hi,
    I am quite overwhelmed by the amount of answers.
    Actually ufortunately neither of the solutions offered solve my problem.
    1.) sy-cprog gives the name of the main program and not the name of the module/include/method that has called my function.
    2.) The function 'RS_EU_CROSSREF' was unknown to me. It is very interesting but it is a cross reference und shows all calling programs and not the one that was actually calling the function.
    Does anyone has got any other ideas?
    Regard Johannes

  • Itunes asked me to do an update- I did- it will no longer load. How can I get the itunes program to work?

    Itunes has onced worked on my computer with previous settings. I was asked by Itunes to make a necessary update, which I did. Now Itunes will not work on my computer.

    atoo2 wrote:
    I just did the IOS8 update on my Ipad retina which had 300  photos it asked me to do an iCloud back up which i did but it deleted all my previous photos and now i only have recent photos how do i get back all my old photos? It said befor that my icloud was out of storage but i didnt know it didnt have my old photos, they arnt back up on itunes either is there any way I can get them back?
    Please see the bold.  If you're out of icloud storage, then you won't be able to backup to icloud unless you purchase more storage, but yet you said you backup to icloud.
    If you really did backup to icloud no data would be loss - sounds to me that it didn't backup since you had no more free icloud storage space.
    iCloud: iCloud storage and backup overview

  • How do I get the Apple tv to play out of my Bose speakers that has the typical white and red plug ins?  Do I need an "optical audio" cord (that is what is available as a plug in on the back of the Apple tv that has the red and the white on the other side?

    How do I get my speakers to play the Apple TV?  My TV is recognizing the Apple TV and the sound is playing out of the TV speakers, but even though I plug my speakers into my TV, it does not play what the TV speakers are playing.  Do I have to plg the speakers into the actual Apple TV unit?  If so, do I need an "optical audio" plug in?

    appletv play audio out of optical out of hdmi and the old alu one play out the RCA too
    the typical the white and red plug ins would be RCA if you have a atv2 (the black one) you cant use
    RCA as that is analog and optical and hdmi are digital
    you can get converters but some would be pricy and could cause delay between image and pictures for video

  • How can i get a video file with subtitle out of DVD Studio Pro?

    i got a project for a dvd in dvd studio pro. There are subtitles which i created within dvd studio pro.
    Now i want make a web version of the video with the subtitle, how can i get to this?

    Hi Mr. Cutter,
    There is an app called "D-Subtitler for Mac" (as well as several others)
    which should allow you to extract the subtitles from a copy of the
    finished dvd and use them otherwise.
    It's been awhile since I had to do it but it is a fairly common need
    so the software exists.
    J>H<L

  • How do I get the install program to install in a different directory?

    I think I know what the problem with FF. It is my computer hard disk. I think there is a bad sector where the program gets installed. Sometimes after the third attempt to get into FF it lets me reset and works. But as soon as I have a problem with FF and close FF it has problems again. The installer normally installs in C: programs (x86). I would like to direct it to just c:\programs directory. Then how will I make sure the new place points the profile in the right way?

    Firefox on Windows is a 32-bit application and thus needs to be installed in "C:\Program Files (x86)"
    Only 64-bit applications belong in "C:\Program Files\"

  • How do I get the setup program for the updated version to run after it has downloaded?

    Whenever I open Firefox and repeatedly while I have it open I am urged to install the new version (4.0.1). I have hit the download button multiple times and each time the .exe file appears to download without problems, but then I don't get a prompt to install it. I have searched my HD for "4.0.1" and "setup" but can't find the setup file. I'm using a 64-bit Toshiba with Windows Vista Home Premium, and I have never had any problems with Firefox or other upgrades in the past.

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
              Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
              Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
              Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test.
    Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

  • How can I get the keyboard program InKey to work with InDesign?

    I use InKey to type special characters, particularly underlined vowels, for another language. This has worked fine in Microsoft Word with most Unicode fonts. However in InDesign, the underlines do not line up under the letter; or, more commonly, they just display as a pink space or box after the letter. Simply using the Underline format on these letters is not sufficient to be able to check their spelling.

    Oh, cool! I never handle any Mayan stuff in my job, but many of my academic cohort have done so. Mostly Tzotzil.
    Anyhow: your sample font was Times New Roman. If you can't see the combining glyphs, then you're using an out-of-date version of the font, or something else is wrong. . Did you maybe start your work on a contemporary version of Word in WIndows, and now you've shifted to using a Mac with an older version of Office? THere are plenty of nulls in TNR (which are usually codepoints not in Unicode, usually a sign of some kind of hacky workaround on the part ofthe font designer). There should be a real combining macron below right about here, in between the crazy upper Latin and the Greek caps :
    So I'd want to know: what font are you using for this? If not TNR, then I'd suggest Gentium. I might even suggest dropping TNR for Gentium. Judging by your screen name, you may well already be aware of SIL. If not - oh hey, they make fonts for people who are in your shoes! Go check 'em out. The fonts are free, and pretty reliable. And Gentium may already have a precomposed with-line-below glyph for your typesetting needs.
    The Kerning dropdown lets you adjust the spacing between letters in a letter-by-letter way. Selecting all of your text and picking "Metrics" is the way to go here - unless you are a designer who thinks that the capital D is way too far away from the lowercase i, and want to tweak the kerning manually. "Optical" is for large font sizes where body-text-style kerning is too spacious. Avoid using it at small font sizes.

  • I paid for the annual subscription for Creative Cloud. but when i download the programs it showed me using the trial version. how do i get the full program i paid for?

    i bought 2 license for CC but i can't download full version for this. it always show like "download trial version". Please advise

    Please check if the 2 license are for CC team or CC individual, if it is for Team then you need to assign seat by sending the invite from the admin console & the user has to accept the invite.
    Unable to license a trial product with Creative Cloud for Team
    If it CC individual then please refer to:
    I'm a Creative Cloud member, why is my app launching as a trial? Mac OS 10.7.4
    creative cloud software says my free trial has expired, but I have a paid subscription
    https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    Regards
    Rajshree

  • I bought a album and it has 4 incomplete  songs on it how do I get the re-download them with out having to pay again   ?

    i bought a album and it has 4 incomplete songs on it, how do i re-download them with out having to pay again

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • How can i get the source code from java concurrent program in R12

    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    Zulqarnain

    user570667 wrote:
    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

Maybe you are looking for