How do I get the Instruments HP438 Vi to show up in the palet

When I down load a device driver VI ... how come it doesn' get setup in the Menue Palets

Extract the instrument driver to
..\Program Files\National Instruments\LabVIEW 7.0\instr.lib
Re-launch LabVIEW, and you will see them in Intrument I/O > Instrument Drivers
Regards,
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Similar Messages

How do I get a "transfer images" button to show up in the solution center?

How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
Scan buttons are displayed and work, as does print.

What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

How do I get folders and their content to show up in the "Administrative Console"?

We have added a few sub folders under the “webroot” folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders.
My question is how do I get these folders and their content to show up in the “Administrative Console”?
Also how do I get the videos to be logged?
I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting?
Attached is a pic of the folders.
Thanks
Chip

If Apache and MS do not talk to each other then where or should I be making these folders, some other location?
Maybe under the vod folder under applications?
Where in the “Flash Media Server” pdf would this be talked about?
Would I edit the Application xml file?
I am so new it hurts!
Thank you,
Chip

How do I get content from my iPad to show up on the tv screen using Apple TV without going thru iTunes?

How can I get content from my iPad and my air book to show up on the tv screen using Apple TV, without going thru iTunes?

You will need to use AirPlay to see that.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

How do I get back an imovie project that shows up in the Project library but doesn't show up in imovie itself?

Worked on an i-Movie project yesterday but when opened i-Movie this morning, the project showed a date of January 13 as last modified date and the project was completely empty. When I look in Project Library, I can see the project from yesterday. How do I get it back into my i-Movie so it will open. Thanks.

Hi Rour and vc38,
A number of others here have posted about this problem, including me. See the following threads:
https://discussions.apple.com/message/21157327#21157327
https://discussions.apple.com/message/21177008#21177008
https://discussions.apple.com/thread/4748933?start=0&tstart=0
https://discussions.apple.com/message/21157079#21157079
It's best to report this to Apple, as the more they hear from us the more likely we'll get a fix (hopefully). There is probably a common issue with this, but I'm struggling to think of what may have triggered the problem. Was it a "recent" update to iMovie or OS X Mountain Lion, or perhaps another updated app conflicting with iMovie?
To report the problem to Apple, in iMovie's menu click on iMovie > Provide iMovie Feedback.
John
PS. Your English is fine Rour

How do I get my .csf file setting to show up in the Convert to Profile or Proof as menu choices?

I received specific menu choices for Color Settings from a commercial printer I use. I went to Edit<Color Settings and saved them as a .csf file in User/Library/Applications Support/Adobe/Color/Settings. I named the .csf file after the printer. When I go back into Edit<Color Settings and open the Settings menu I am able to choose the settings I saved from the list of settings. Now I open an image in PhotoShop and go to Edit<Convert to Profile. In the dialog box I open the Profile menu, but the settings I saved in Edit<Color Setting are not one of the Profile choices. Am I confusing Setting and Profiles? How do I Convert an image file to the setting given me by the printer? I also wanted to proof as per the printer's settings. When I go to View<Proof setup<Custom I can choose Working CMYK Web Coated SWOP 2006 Grade 3 Paper, which is generally the profile this printer is using. But I can't choice my specific color settings saved under the printer's that I previously saved in Edit<Color Settings. In the Proof Setup dialog box when I press the load button I can navigate to the Settings folder where my .csf file is saved, but it is greyed-out so I can't choose it. Anyone know what I'm doing wrong? Please advise/help. Thank you.

"Am I confusing Setting and Profiles?"
Yes. A Color Settings File (CSF) will contain values for all the controls in the Color Settings dialog. One of these controls specifies the profile to be used for the CMYK Working Space. That profile will be used by default when you create a new CMYK document or convert an RGB (or some other colour space) document to CMYK.
The profile, not the CSF, will be at the top of the list of CMYK options in the Convert to Profile dialog, as "Working CMYK - <name of your CMYK profile>". However, you may want to skip that dialog and instead do Image > Mode > CMYK, which will simply raise a prompt asking you whether to proceed with the conversion to your CMYK Working Space profile.
In View > Proof Setup menu, item "Working CMYK" also will use the profile that's specified in Color Settings, then "Custom..." in the same menu will give access to options to simulate paper and black ink.

Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

Updated to an iphone 4s from iphone 4. Did backup and sync but some apps have not been copied to the 4s although they do show up on the iphone4. How can I get my missing apps?

Download Past Purchases
http://support.apple.com/kb/HT2519
Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

How do you get iTunes purchased songs to automatically play one after the other

How do you get iTunes purchased songs to play automatically one after the other without having to hit play for each song ? Also I lost all my pictures on my iPad when I installed iOS 7 upgrade. Any way to get them back? Thanks. Dr Ron.

Hi Dr. Ron,
By your question, I am wondering if you are playing your music from the iTunes app rather than the Music app?
In the Music App, you can go to any of the options at the bottom and click on a song to play and it will then continue to play the songs in that category. You can also select "Shuffle" to shuffle them.
As for your Photos, did you have them backed up anywhere?
Cheers,
GB

How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps.

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

HT1311 i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on th

i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on the phone

What is the precise wording of the error message that occurs on the old iPhone when attempting to do a backup?
Are you attempting to backup via iTunes on the computer or iCloud?

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

How do I get all my pins (bookmarks) to show up on maps rather than choosing one from the bookmark list?

How do I get all my pins (bookmarks) to show up on maps rather than having to choose from the bookmark list? I can see my list getting very large and more cumbersome to search. In google maps, all my starred locations show up on my map.

Have you let Apple know you would like to see this feature? They do not participate in the forum, and their only source of user feedback is the feedback page. To let them know you would like to see a feature, go to the feedback page at www.apple.com/feedback and select the appropriate link.

How do I get my Sony ebook Reader to show up ("be recognized") in the top left corner??

How do I get my Sony ebook reader to show up ("be recognized") in the top left corner of the window. It never shows up and I cannot transfer books from my Mac computer to ADE. I am using Sony Reader Library but it is developing problems!! Can anyone assist??

No solution yet. One would think that Adobe would recognize that several complaints have been reported on this problem. Obviously, nobody knows how to fix it!! Sorry I can't be helpful!!

How do I get the Instruments HP438 Vi to show up in the palet

Similar Messages

Maybe you are looking for