How do I get the KORG KLCDE VSTi into Logic Express ... ?

*Just quick question ....*
*I have recently bought the KORG LEGACY DIGITAL EDITION (klcde) ...as I have always liked the*
*bigger , fatter sounds of the Korg M1 and the wavestatons ...*
*IN simple terms .. I would like to use this Virtual Synth in Logic Express ( with the latest update) ....*
*What would I have to do to achieve this ... ? I searched the Logic Help and could not resolve this ...*
*Please answer in laymans terms , as , a geek , I am not ! ...*
*Regards ,*
Mike

I assume you have bought the Mac Version, have installed it and registered it?
I also assume you have read the installation instructions on the Korg website?
Usually, external digital Instruments are triggered by Logic via the AU (audio units) protocol. So, during the installation, the Korg Installer should have installed an AU version of the KLCDE onto your Mac. If it is installed in the right place, Logic should have recognized it during the next startup and should have validated it.
If all this is done, you can access it as any other software instrument. Look under the AU instruments submenu.
If not, Korg might have better answers than i have. You should ask them.
Fox

Similar Messages

Teststand 1.03 - How can I get the sequence file path into an expression?

The sequence file will be located at different locations on different computers. I need the base address of the sequence file to get to the correct limits file. How can I get the sequence file path into a string-local expression.
Thanks

As Ray described, the FindFile expression function and TS API method will seach all TS search directories and return to you the path of your file, assuming the file is located in the search directories.
If you just want the path of a TS file that you have a reference to then there is a faster, easier method. You can use the Path property of the PropertyObjectFile class. In the attached example I use an AcitiveX Automation adapter step to call Path on the property RunState.SequenceFile. This returns the path to the current executing sequence file. Note that if you have not yet saved the sequence file then the path will be empty. In a subsequence step I strip off the file name leaving the root path of the file.
Attachments:
GetSeqFilePath.seq ‏22 KB

How do i get the current version of web logic server on obiee 11g

Hey
I am pretty new to 11g and Weblogic
How do i get the current version of web logic server on obiee 11g(11.1.1.5), I know that it should be higher than 10.3.5.
Thanks

Hi,
Obiee11.1.1.5.0/6.0 both version supporting weblogic 10.3.5.0/6.0 both are no issues.
http://blog.whitehorses.nl/2012/02/26/a-few-quick-tips-for-upgrading-ofm-11g-to-patch-set-5/
also refer
http://docs.oracle.com/cd/E23943_01/bi.1111/e16452/bi_plan.htm#BABECJJH
Thanks
Deva

How do I get the videos in iPhoto into a thumbnail in iMovie

How can I get the videos that are in an iPhoto album to a thumbnail in iMovie when thumbnail does not appear? I have a early 2009 24" iMac and using iphoto 11.

Are you saying the the movie in iPhoto doesn't show a thumbnail or that it doesn't have a thumbnail in iMovie? If the latter then ask in the iMovie forum.
If the former then we need more information:
what exact version of iPhoto are you using?
what system version are you running?
what do you see in the iPhoto window when viewing an Event containing the movie in question?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

How do I get the Korg NanoKontrol to work with Logic Studio?

I just bought a Korg NanoKontrol control surface to use with Logic Studio but it isn't working right. I can get the faders and pan to work in one scene but the transport controls don't work in any scene. If anyone knows anything about how to get it to work please let me know.

Hey Scrooge, why the attitude? Did anyone here mistreat you? And why hijack the thread?
Anyway, if you loose settings minutes after they worked, I would say the hardware may be shaky. Or the cabling. Or the operators' skills.
Ambient8 has gracefully and concisely pointed the way, and if something is not working just describe what and how it is, instead of complaining (on somebody else's thread) to people who voluntarily try to offer help & solutions.
Ambient8:
+"Pay special attention to "Assigning Key Commands to Control Surfaces" on page >164+
+The rest need to be set up as a control surface by using the Learn (Command+L) function to assign faders to tracks and knobs to pans, etc.+
+See the Logic Pro 8 Control Surfaces Support guide in the Help menu for info on controller assignments. Chapter 2 "Customizing Controller Assignments" has the info assigning controllers to Logic Pro parameters."+
If you say I did exactly as described on these pages, and all your settings seemed to disappear, I can only assume that either something is wrong with your Logic prefs, the logic.cs file or the CS itself.
Regards, Erik.

I am unable to reply to your e-mail convermation--how can I get the URL to past into my browser?

Received a confirmation e-mail requestion me to reply to it and I cannot get the URL to paste to my browser--how can I do this???????/

Hi June,
Sorry for the trouble you've had.
I've verified your account on our end and you should be able to access the ExportPDF service now.
Please let us know if you have any questions!
-David

Hi - replaced my old computer but did not copy over library. How do I get the music on Ipod into new library?

Hi - replaced my old computer but did not copy over library. How do I get musci from ipod to computer "library" so it can then go to Iphone. Drag and drop does not do it.
thanks
g

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How do I get the Device link back into the left column so I can update to iOS 5. Don't know what I did with it.

The Device link on my iTunes is missing. How do I get it back into the left column?

Top Sites, you mean? You can instruct Safari to open these in the General section of the preferences.

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those clips in Organizer. I can do that in Premiere Elements 12 and save them as "Projects" - but how do I get the divided clips back into Organizer?

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those single clips into 2 or 3 separate clips, each shown separately in Organizer. I can divide the clips in Premiere Elements Editor 12 and save them as "Projects" - but I can't find any way to get those divided clips back into Organizer. Does anyone know whether that can be done? Many thanks for your thoughts.

What about Google Drive? And just share the folder with the family members.
Erick

How can I get the time for a simulate signal express vi waveform?

I tried converting to an array and then indexing, but every index I try only gives me the y value. See attached VI for clarification on what I mean.
Attachments:
simulate signal.vi ‏49 KB

You will have to keep track of that yourself. You are sampling at 360kHz. This means that each sample is ~2.8us. You can easily get the time by taking that dt (2.8us) multiplied by the sample index and adding the time at which the first sample was taken.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do I get the Manged bean and Taskflow logic for Disable button in User details Modify page

Hi,
I have a requirement where I have to add to custom buttons like "Terminate" and "Reinstate" in the users detail page. Terminate is closely modeled with "Disable" button of user details page. Before I develop the custom beans and register the task flow for the custom button, I just want to understand the logic written in the managed bean for "Disable" button and understand what is there in its associated task flow. Am trying to get these details from OIM. Not sure where exactly I can get the code for this and customize as per my requirement.
Please suggest the exact location?
Raghu

Thanks for the information - I still was hoping that the article Mario mentioned above was accessible (perhaps just moved)? Somewhere on the BC system? Just so I can add it to my BC help folder - as well as even share it with clients who want to try things on their own (best to give them some help in that direction so they don't fumble through things).
I have the checkout form populating information, if they have purchased in the past it will populate their address - but I am also trying to get their "account page" to do the same (basically show them what their current information in the system is - then allow them to update whatever might be wrong or need changes). We have a login page, for people to sign up without having "bought" something - so the CRM won't have their billing/shipping info in the system yet. Trying to capture that without a purchasing being made.

How to I get the Keyboard Plug In for Logic that includes the B3 Hammond Organ?

I just downloaded Logic Pro X, along with all the additonal instruments, but I can't seem to find any of the keyboard plug ins that I thought came with it. I'm really interrested in the B3 Hammond Organ plug in. How to do I get that? Can anyone help me?
Thank you!

Search for Organ patches, the instrument used is named "Vintage B3 Organ"

How do I get the object help text into my document (report)?

Post Author: ehskalm
CA Forum: Desktop Intelligence Reporting
I want to display the object help text (the "description" field in the object properties in the universe) in my report, but I can not find any function for that? Anyone who knows? BO version is 5.1.

Post Author: hvanderkolk
CA Forum: Desktop Intelligence Reporting
All information about the classes and objects in a universe are stored in the repository database (universe domain). To get that information in your report you need to create a query on the repository database.
For an overview of all objectnames and descriptions that would be:
SELECT WA_UNV_OBJECT.OBJ_NAME, WA_OBJECT_HELP.OBJ_DATAVALUEFROM (WA_UNV_OBJECT RIGHT OUTER JOIN WA_OBJECT_HELP ON (WA_OBJECT_HELP.OBJECT_ID=WA_UNV_OBJECT.OBJECT_ID AND WA_OBJECT_HELP.UNIVERSE_ID=WA_UNV_OBJECT.UNIVERSE_ID) )
Note: this if from BO6.5 using SQL server 2000 for the repository database.

How do I get the converted ProRes file into my timeline?

Having done a quick test editing AVCHD natively I decided to transcode to ProRes and try that.
So I imported a new AVCHD clip after ticking the "Optimise Media" box and the clip was duly converted and appeared in the Event Folder on my scratch disk.
However, when I select the clip in the Events window of FCP X or in the timeline and select Info in the Inspector it reports that the clip's codec is H.264, Linear PCM.
What's going on?

I have similar issue. I use XDCAM EX and when I tried to optimize. Reveal in finder still shows EXDCAM EX. When I import a clip without optimization the option to transcode is grayed out. So I guess that FCPX will not transcode to ProRes probably because there is no need to.

How can we get the values from the view?

Hi All,
my scenario is i have two fields in my view .one is parameter.and another on is select-options.how can i get the user entered values into my selection screen.?
for the select options i get the values into field-symbol.for parameter i get the value using get_attribute.
can i use like this in select statement.
WHERE SERVICE_ID = ZSD_DD_AUFNRS
                   AND CRE_DT IN <FS_DATE>.
Regards,
Ravi.

Hi Sravan,
when i am using the below code to generate self defined functions i m getting a error .
*Generate an object for self defined functions
DATA: lo_self_functions TYPE REF TO if_salv_wd_function_settings,
*Generate an object for button 'Confirm'
       lr_button TYPE REF TO cl_salv_wd_fe_button,
       lo_self_function TYPE REF TO cl_salv_wd_function,
              l_text type string.
*Set Self-defined functions
*'Confirm' Button
lo_self_functions ?= l_value..
lo_self_function = lo_self_functions->create_function( 'CONFIRM' ).
CREATE OBJECT lr_button.
CLEAR l_text.
l_text = 'Confirm'.
lr_button->set_text( l_text ).
lr_button->set_image_source( '' ).
lr_button->set_image_first( 'X' ).
lo_self_function->set_editor( lr_button ).
Error when processing your request
What has happened?
The URL http://cgslsvr3.cgsl.com:8020/sap/bc/webdynpro/sap/zsdr_cash_work_list/ was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: IDs Can Only Contain Characters of Syntactical Character Set
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TOOLBAR_BUTTON==========CP
Method: NEW_TOOLBAR_BUTTON of program CL_WD_TOOLBAR_BUTTON==========CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEM of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~CREATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR_ITEMS of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE_TOOLBAR of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_UI~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: CT-0024 -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080414 -t: 105835 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How can i resolve it?
Regards,
Ravi

How do I get the KORG KLCDE VSTi into Logic Express ... ?

Similar Messages

Maybe you are looking for