How do I get the last Java back, the most recent upgrade has disabled a key task my computer needs to be able to use for my business?
I recently allowed the software update and the installation of java 7 has disabled a key task I need for my business, specifically being able to view 360 degree tours that I create.
Slightly different OS and update, but I was able to use Pacifist to install the java Update 15 for mac os 10.6 after Update 16 had screwed up some business-critical sw of ours. You will need to go to the downloads site and download the previous update, and then use Pacifist to re-install the earlier version.
http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx
This might or might not actually work -- it depends entirely upon the details of the updates, and you could end up in some weird jumble of pieces-of-multiple-updates all together... Java updates are patches, not a full copy of the software, so to really go back you have to start from the beginning and apply the updates in order. In the case of Update 16, we were lucky in that whatever was screwing up our program was changed in both Update 15 and Update 16, so writing the Update 15 back overtop of 16 fixed our problem.
Similar Messages
-
I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?
Hello, Anita.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup. This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6. Try going through the steps in the article below.
iOS: Unable to restore from backup of a newer device
I would also check to see the backup dates in iTunes and if the backup is located on iCloud instead of iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
Cheers,
Jason H. -
In Messages, how can I get the most recent entries to appear on top, like with my emails? Thanks!
In Messages, how can I get the most recent entries to appear on top, like with my emails? Thanks!
HI,
A Note.
Technically the most recent Conversation (or Chat) that has a new message (be it iMessage or IM) will move to the top in the list on the left if it is set in the View Menu to do so.
Obviously this does need more than one Conversation or Chat to be listed to work.
It does not change the focus of the Chat/Conversation you are viewing.
iChat - the forerunner naver had an option to invert the chats.
The iChat Feedback page is where I use.
You will also see it does not list iChat 6 depsite listing Lion.
In this sense it has always beeen out of step on the iChat/Messages version front (it took me a long time via the Lounge and Host help to get it on the list of pages to be updated on New OS versions)
11:00 PM Friday; June 28, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
how and where do I the the latest IOS for IPAD!!!
Fredronalderman wrote:
there are apps I would like to use that require 6.0 or later. how do i get the most recent ios 7.0.3?
Finding iOS Apps Compatible with Older Devices
App Store: Downloading Older Versions of Apps -
How do I get the contacts from my mac to sync with Icloud? I need to back up my phone since I will be receiving a new one tomorrow and the icloud contacts are not the same as the ones on my mac. Help me
OS X Lion. 10.7. Your profile says your running 10.6.8, which is Snow Leopard. You need 10.7 to use iCloud with your Mac.
-
How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?
Hello Arthur,
Thank you for the reply.
You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD , pen and paper and CDs .
Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
Thanks
Amanda -
How do I get my camera roll back following iOS 8 upgrade?
how do I get my camera roll back following iOS 8 upgrade?
Then Apple should tell owners about this before the upgrade, so we know what to do. This is very typical of Apple, who assume owners are geniuses and can get themselves out this kind of issue. You say I should be importing pics to my Mac, why should I? I import the pics I want for the longer time and don't import others that I want to keep on my iPhone. What I don't expect is for an upgrade to delete stuff without a clear warning. I will be taking this up with Apple. I remain pretty fed-up.
-
How to get the Most RECENTLY installed JRE path and version ?
Hello Experts,
I am working on Installshield, and for some purpose, I need to get the MOST RECENTLY installed JRE version and Path. Now I have two choices :
1. Go into the directory " C:\Program Files\Java\" and get the most recently changed directory, ( that will be the installation directory of the most recently installed JRE ). And then search in the registry under : HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/Java Runtime Environment/ and look for the version which is having
the value of the key INSTALLDIR as the above found Installation Directory.
But in this approach, I'll never find the Installation dir or version, if the JRE is installed somewhere else than the default location.
2. Now this is the reverse. I first search in the registry, and get the Installation Directories of all the versions installed in the system, and then look at the file attributes ( may be by using some batch file ) and see which one is most recently installed.
My question is, is there any other way, by which I can get the most recently installed JRE's installation Path and version? Or can we trace it during the installation itself ? I mean when we install the JRE, it creates some log files in %TEMP% directory. Is it possible to trace the version and installation directory of the most recently installed JRE from the log file ?
Thanks
GaganRendering times are pretty much based on processor speed if I have that right. Not much you can do about that other than buy a new computer. Your day to day work in the finder and accessing of files would be faster with your boot drive internal. One thing you can do is ensure your FCP System Settings are on the fastest disk you have. If you put a pair of drives internal and made a RAID volume for them you would improve your write speed when capturing and for any other read/write operations. You would have to be sure you kept that backed up properly because you double the odds of a failure when two drives spread the data between them. There are many RAID options.
You could also bump up the RAM but you'd have to look at your processes to see if you are being limited by RAM. I'm guessing not but it's not impossible. If you are accessing scratch disks due to RAM limitations that would be one thing you could do.
I would never bother connecting an external via USB if there was an esata or firewire option. I use an esata card internally to give me access to estata storage. I also keep an external FW800 drive for a mirror backup of my boot drive. All my data and booting is internal with all my backups external. Each internal has an external and I have additional externals that I keep off site to protect against fire and theft. -
I have os x 10.5.8, how do I get the next software upgrade?
I have os x 10.5.8, how do I get the next software upgrade? I'm willing to pay if I have too. Please help, i'm clueless
Go to Apple menu -> About This Mac. If it says iMac G5, you are at the max you can go. If it says iMac Intel CoreDuo and has at least 1 GB of RAM, you can go up to 10.6.8 with stedman's link, but the static version of that link is:
http://store.apple.com/us/product/MC573Z/A If it says iMac Intel Core2Duo and has at least 2 GB of RAM you can go up to 10.7, but need to get the above DVD, and upgrade to 10.6.6 or later to get the App Store, and then finally download 10.7. A USB flash drive version of 10.7 should be out later this month, and it is unknown if it will allow you to skip 10.6 or not. See my upgrade FAQ* for pitfalls you may run into each:
http://www.macmaps.com/upgradefaq.html -
How to return only the most recent row?
Hi guys,
I have a question which I am hoping is not too difficult but I just am not sure how to do it. I need to run a query on a table which may bring back multiple rows for my criteria, however I only want to bring back 1 of these multiple rows and the one I want to bring back has to be the most recent. I do have a date_created column on my table as well as a date_last_updated column. So basically using the select statement below as an example this query could return lets say 5 rows, I however only want it to return the most recent row and the most recent row is determined by the date_last_updated (which will only be populated if the record has been updated otherwise it is null) or the date_created fields.
select * from my_table
where model_id = 234
Any help on this matter would be greatly appreciated.
Thank you.Hi,
you can do; -
select *
from
(select *
from my_table
order by creation_date desc)
where rownum = 1This does not guarantee that you will get the most recent in cases of records being created at exactly the same time, but if your table has a prime key then you could use this as the order by to get the same effect, though if say 5 records are inserted as a batch what does it really mean to be inserted last....
regards,
Robert.
Edited by: Robert Angel on 09-Jul-2012 08:22 to add code tags. -
I am about to buy my first Macbook Pro, should I wait for the possibility for a 2015 macbook, or just get the most recent model currently? (9-22-14)
No one knows if there will be a new model and if so, when that would be. However, there always will be something bigger, better, and newer around the corner, so you'd be waiting forever.
Buy it when you want or need it.
FWIW, here are the specs of the latest models (which happen to be mid 2014):
Apple - Support - Technical Specifications -
I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7
Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps. -
Why can't ipod touch 1st gen get the most recent ios update?
i have tried to update my ipod touch but it doesnt work. i dont understand why the 1st generation cannot get the most recent update.
Because the 1G iPod does not have the hardware necessary to support higher than iOS 3.1.3
-
I'm running OS X 10.5.8 & Firefox says that my computer is not compatible with the most recent upgrade. What am I missing? Thanks!
The last version of Firefox which is compatible with PPC architecture is Firefox 3.6.x. <br />
http://www.mozilla.com/en-US/firefox/all-older.html
For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/ -
From osx 10.5.8 up to the most recent upgrade
I have a MacBook 2009 with osx 10.5.8 what is the most recent upgrade I can buy? osx 10.6.8 and from there go up to mavericks?
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Snow Leopard Purchase
Use the combo updater. Saves time.
10.6.8 Combo Updater
Maybe you are looking for
-
Hi all, I have an excel sheet with 2 spread sheets. 1 hidden and other visible. 1) How to read the excel so that the hidden fields dont come into the internal table in which the data is read? 2) when the data is read from the visible tab of the excel
-
Read source XML as a string in expression editor
Hi all, Is there any way to read an entire container objects source (an XML message) in an integration process as a string using an xpath expression in the expression editor? I would like to pass the source XML of a container object as a string into
-
Problem in html:link tag in struts
hi every body i have a problem i have to pass two dynamic variable to next page using html:link tag how can i send it for example <a href = "editEmp.jsp?id=<%= empSno %>&&delete=no"> Edit </a> should be coverted into <html:link >and i want to pass 2
-
Delays in Reds on DVD, artifacting on Pans & Push ins.
This may be a combined Compressor and DVD Studio Pro issue. I am experiencing delays in video, just in the bright reds of the short I am exporting to DVD. I am working in uncompressed 10 bit in FCP, and am using compressor at the 60 min high quality
-
Logging level warning not working.
We have logging set to "warning" in our sessions.xml file, but we still see fine and finer logging lines. Is there anything we are missing? Any help is appreciated. We are on Toplink version 10.1.3 Here are the lines from the sessions.xml file. <logg