How do I get the printer to use regular (not Colorlok) paper when printing what it considers photos?

I get emails with attachments of a document that someone has taken a picture of with  their iphone (a bill, a receipt, etc). I finally got the HP software to give me a print option, but when I try to print, the printer gives the error message that you must use colorlok paper. I'm printing a receipt, not a glossy family photo! Is there a setting that can be adjusted?

Welcome to the HP Community , I saw your post about the message you're seeing to select colorlok paper, and I will surely do my best to help! When you open up the email attachment that you need to print, which program are the attachments opening up in that are not allowing you to select a different paper type? Let me know which program it is, and I will look in to the options. In the meantime, try using another program to print the items from if that's an option to see if that helps! I hope to hear from you! Say thanks for my reply to help you today by clicking the "thumbs up" below!

Similar Messages

  • If I wish to print Contacts as a list how do I get the list to be alphabetized.  All my contacts print but they are not in alpha order.

    Sign out

    If I wish to print Contacts as a list how do I get the list to be alphabetized.  All my contacts print but they are not in alpha order.-cannot find an answer other than use iCloud which did not work.Tried Safari and Firefox.
    What to try?

  • How do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?

    how do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?  I'm told by HP to get it through Apple updates but it doesn't show up. 

    The term "server", while technically correct, is misleading.  A print server takes the low-level protocol spoken by a printer and serves it over a higher-level protocol.  For example, parallel printer port (a.k.a. Centronics or IEEE 1284) and serve it over USB.  Or parallel or USB and serve it over Ethernet with a variety of printing protocols (lpr/lpd protocol, JetDirect protocol, port 9100 protocol, the names are confusing).
    In reality, a print server looks nothing like what we usually associate with "server" (which is typically a biggish computer).  Instead they usually look like adapter plugs or even adapter cables, or like a little network hub (just with printer connectors instead of network connectors).
    Here are a few examples (I'll use Amazon as a guide book, without implying that I endorse them).  Let's start with USB to parallel; it seems they tend to look like adapter cables.  Here is one that takes a USB plug (male) and creates a female port that you can plug your regular old printer cable in: http://www.amazon.com/Cables-To-Go-16899-IEEE-1284/dp/B000UX21PY/ref=sr_1_1?ie=U TF8&qid=1333640548&sr=8-1
    And here is one that goes from a USB plug directly into the printer: http://www.amazon.com/Parallel-Printer-Adapter-Connect-parallel/dp/B000BV8604/re f=sr_1_4?ie=UTF8&qid=1333640548&sr=8-4 replacing the old printer cable.
    Then there are (really cheap) Ethernet to printer adapters.  Here is one that you put into the printer (warning, the plastic cover will probably not fit afterwards): http://www.amazon.com/TP-Link-AC-TL-PS110P-Single-Parall/dp/B003CFATR4/ref=sr_1_ 11?s=electronics&ie=UTF8&qid=1333640755&sr=1-11 By the way, I really don't like this type, I always find them unreliable.  But they are cheap.
    The ones I like look more like a network hub. Here is the NetGear PS110: http://www.amazon.com/NETGEAR-PS110-parallel-Ethernet-100Base-TX/dp/B0002AF9JU/r ef=sr_1_2?ie=UTF8&qid=1333640860&sr=8-2
    And the HP external JetDirect: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/18972-18972-236253-34214-64302-273 16.html?dnr=1&jumpid=reg_r1002_usenc-001&lang=en&cc=us (I think this is the best one of the lot).  Both of those you put next to the printer, use your existing parallel printer cable, and connect them to the network.  Don't get scared by the astronomical price of the HP; it's commonly available used.
    There are even some wireless models around.  In theory, you might be able to use a parallel-to-USB adapter cable and then plug the USB cable into your trusty Apple Airport (as a good Apple fanboy or fangirl you've bought an Airport, right?), but I don't know whether that will work.  With the HP JetDirect box I'm quite certain that it will work (but it's old-fashioned, doesn't come in white, doesn't do wireless, and is not the slightest bit hip or cool).

  • How do you get the page count on an old hp 1012 laserjet printer?

    How do you get the page count on an old hp 1012 laserjet printer?

    You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
    You can find more information in this document: Identifying Page Count.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • How do I get the Tomcat port using Servlet.

    I am running Apache + Tomcat. All request are going though Apache. How do I get the Tomcat port using Servlet.

    See:
    ServletRequest.getServerPort()This will give the port upon which the request was recieved . . .which I blelieve is what you are looking for.

  • How can I get the AirPlay information box to stop floating around my screen while looking at photos?

    How can I get the AirPlay information box to stop floating around my screen while looking at photos?

    Thanks for answering
    Well, the CS2 was my 1st full program that now my son is using in his new Laptop...
    The CS4 Master Collection is my full program that I bought when I was in College course and now I use for my own works...
    Both came in their own serial numbers and discs ... I install both completely to each computer but at the end on the registration asked for this "Validation code" and the message says that I can't do it on-line nor by mail; so to call to this phone 1-800-833-6687 and in there have the message to come to the "support " Adobe website and do all this going around.
    Now I saw previously that page you send me... I really don't understand it ... I got CS2 installed but I just need the validation code to get rid of that 30 days message...
    Why I have to uninstall it??? Could you explain me please..

  • How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

    about messaging http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • ITunes will not show my purchases before October 18, when I had a different username.  How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

    iTunes will not show my purchases before October 18, when I had a different username.  How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • I redeemed my $25 itunes gift card on a new account with no email address how do I get the credit on my regular itunes account?

    I got a $25 itunes gift card and tried to redeem it on my regular itunes apple ID account and I had a message saying the code was invalid so I made a new account and redeemed it on that account but it doesnt have a valid email address and I cant even remember what it was how do I get the credit from wherever it is onto my regular itunes apple ID account?

    Qauzzy,  The credit was applied to the account you used at the time you redeemed the card.  There is no way to transfer the credit to another account.
    You might as well just spend the $25 on the new account, and then stop using it and go back to your regular account..
    For future reference, do not start a new account just because you have a problem with the code.  Rather, follow the suggestions in this document: iTunes Store: Invalid, inactive, or illegible codes

  • How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

    There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
    The published website is www.vibrationalvoyages.com.
    When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
    I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
    Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
    SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
    Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
    I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • Accidentally deleted an App Store app.  how can I get the icon back on my home screen?  when I search for it in the App Store it comes up 'open'. thanks.

    accidently deleted an app Store app.  how can I get the icon back on my home screen?  in the app store it comes up 'open' instead of install.

    What happens if you tap on open?
    Remember, if you ever want to find an app quickly, you can slide all the way to the left (iOS 6 and lower) or pull down (iOS 7 and later) to get to an app.
    If you know for certain that you have deleated the app, please try restarting your phone. There are many ways to do this, but the safest way would be to hold down the power button and then slide to power down.
    Once powered down, restart and try to find the icon on your screen. If you still can't find it, go into the App Store and then find the app you were trying to access. It should have an iCloud download symbol since you've purchased it before, rather than saying "install."

  • Where and how do I get the SQL Query used by the Microsoft Generic Report Library - Alerts?

    Background:
    I'm tasked with the following: I need to create a new Report and the SQL
    The two canned reports that I can pattern after are: Microsoft Generic Report Library
    - Alerts (there is also an alert detail report that can be chosen within the alert report that we may want to use instead)
    - Most Common Alerts
    I'm trying to do this:
    Add another parameter to search on customfield3.
    It should be able to report on all alerts that were assigned to the specific team for the time period along with the top 10 (most common alerts) assigned to the team for the time period.
    Choose as the objects (group) all servers, but Imay need to adjust the report to just look at all alerts without having to provide objects or a group
    The struggle I'm having is: I know SQL. I know how to create an RDL file.
    But Where are the RDL files for the canned reports so I can modify the canned RDL and modify its SQL and forms?
    What is the SQL/ where can I find the SQL used for the Generic Report Library -> Alerts

    Easy but you need to extract it from Microsoft Generic Report Pack. 
    So.. the procedure is as follows:
    1) You export and unseal Management Pack from your SCOM using
    Boris's OpsgMgr tools (MPViewer
    2.3.3)
    2) Ok you've got unsealed xml, now the tricky part, use
    MpElementsExtract tool, example of usage:
    MPElementsExtract.exe <MP.xml> /ex /destination:<destination>
    That you way you get several folders out of mp:
    DWScripts, DWSubScripts, LinkedReports, ReportResources, Reports
    Take a look into content of first 2, there will be pure sql scripts, and rdl's are in Reports folder :)
    Other way is to just use SQL profiler and catch SQL query while generating report. 
    --- Jeff (Netwrix)

  • How do I get the encashment date to populate in table PAYR when using FB05

    All,
    The client here is using transaction FCKR to upload their checks for posting.  The process submits transaction FB05 which works for everything except the encashment date, which is not being populated on table PAYR.  I have walked through the transaction BDC session (I am am ABAP developer) and cannot see the field on any of the screens.  I am hoping there is some configuration which needs to be done to populate this field ... along that line I have read some of the postings about algorithms 11, 12, and 13 which will use the value(ation) date (I do see that on the FB05 screen) but I do not know how to find them or make them work, if indeed that is what I need to do.
    Any help would be greatly appreciated.  Also, I am an ABAP developer working at a small client where SAP was implemented about 2 years ago so we are working through the learning curve together. 
    Thanks for any help you can provide.

    Ramesh,
    Thank you for responding. 
    Unfortunately, I am an ABAP developer and do not know FI.  I have asked several of the people here if they know where to find the information you point to, but they do not know either.  (As I said, we are all learning together.)
    How do I find the status group?  Menu paths or transactions would be very helpful.
    Micah

  • How do I get the icloud to use my iture ID

    I have downloaded the icluod on both my windows vista and my windows 7. but when I go to log on it says that the id is valed but not for the cloud, and if I change the id I still get the same thing.

    This is how you create an Apple ID http://support.apple.com/kb/HT2731
    This has FAQs for setting up iCloud. http://support.apple.com/kb/HT4436

  • I want to use the ethernet connection from my new iMac to my Time Capsule.  It seems only the Wifi is seen by either device.  Ive connected the Time Capsule to the iMac.  How can I get the iMac to use the wired connection

    I want to connect my iMac to my Time Capsule using Ethernet.  I have them connected via an Ethernet cable, but only WiFi seems to be working.  How can I specify the Ethernet connection instead of WiFi?  Thanks
    Welked

    Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot.  Also be sure it is at the top of the list (above WiFi).  If not click on the the wheel at the bottom and set service order.

Maybe you are looking for