How do I get the robotic vocoder sound using evoc - Kraftwerk style?

I've setup evoc according to the manual,
and I get it to vocode,
but it doesn't sound very 'robotic',
at least not compared to Kraftwerk.
Does anyone have the details,
e.g. what evoc ps sound should I use,
how should I change the default parameters,

The trick here is to go low, and monophonic (don't play chords). What you are after is basically a one-wave osc as your synth sound to be used in the evoc. Straight up square or saw wave played low in pitch with an open filter should give you the results you are looking for. Mess about with the formant width and shift to get it timbraly where you want. I've noticed that the evoc can be a little quiet, so you may need to boost the signal a bit.

Similar Messages

How can I get the "Purchase more sounds" link to light up under GarageBand?

how can I get the "Purchase more sounds" link to light up under GarageBand?

Did you try it in the program monitor?

How can I get the App store to use money in my account rather than a credit card when I want to buy something?

How can I get the App store to use money in my account rather than a credit card when I want to buy something?

The iTunes/Mac App Stores use credit on an account first. You are asked to supply an additional payment method when the cash credit doesn't cover the complete cost of the purchase.

How do I get the guitar to sound good?

I'm trying to get the settings right so that I can have a heavy metal electric guitar. I can get it to sound close, with the Amp Simulation -> American Overdrive effects, but it sounds too "rough". I'm trying to get it to sound smoother, but still with the static like noise that they all make. If you want to hear what I mean, listen to some of these songs:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewAlbum?playlistId=170235170 &s=143441&i=170235386
1st gen MacBook- white, 2GHz Mac OS X (10.4.8)

I love Amy Lee. I use a M-audio black box to get the heavy guitar sounds. I got garageband open I'll see if I can get something close. I'll post back later if I can get that sound in GB.

How can I get the alarm to sound on my Iphone with ios7

I set two different alarms on my phone, and I never had a problem hearing them until I updated to IOS7. I wake up late and can see the notification and snooze option, but no sound. Can anyone help?

Turn up the alert volume all the way in Sounds. Lock it so you can't change it with the buttons.

How do I get the difference in time using 2 ttl pulses

Hi everyone, I have a question using the delay time. What I need to find the time interval between 2 incoming TTL pulses and fire the output TTL pulse precisely the same time interval after the second TTL pulse. I have been using Labview 7.1 with real time module and FPGA module (I think 1.0 because I can not find wait for rising edge vi). I am using NI 7830R card. The length of each TTL pulse is about 1-5 microsec. Second pulse comes in at about 1 millisec after the first one. So I need to fire aboyut 1 millisec after the second incoming TTL pulse. Because of the non constant TTL pulse length, I would like to reference at rising edge of incoming ttl pulses. Can anyone give me a help on this?
Thank you very much.
Hideya

Hi Hideya,
As is the case with many programming questions, there are several ways to go about solving this one. The solution I have in mind is to poll the digital input line for a transition from low to high. The simplest way to do this would be to use a loop with a shift register to store the previous digital input value. When the current digital input value is greater than the previous value, you can get the tick count (microsecond resolution sounds like it would be sufficient). You can then do that sequence of operations a second time. The difference between these two tick counts can be used as the input to the wait (microsecond) function. After that you can send your digital output pulse.
Best regards,
David H.
Systems Engineer
National Instruments

How can i get the time capsule to use my mac's mac address

on some wireless routers you can get the router to use the mac address of a client connected to it instead of it's own.
Can i do that on the time capsule?

Sorry, but no. You cannot change (spoof) the MAC address on any of the AirPort/Time Capsule routers.

How Can I Get The Table_Name Where I Used Dbms_Errlog?

CREATE TABLE ERROR_LOG
ORA_ERR_NUMBER$      NUMBER,
ORA_ERR_MESG$           VARCHAR2(2000 CHAR),
ORA_ERR_ROWID$      UROWID(4000),
ORA_ERR_OPTYP$      VARCHAR2(2 CHAR),
ORA_ERR_TAG$           VARCHAR2(2000 CHAR),
ORA_ERR_TABLE_NAME      VARCHAR2(30),
ORA_ERR_TIME           DATE     DEFAULT SYSDATE,
ORA_ERR_AUTHOR     VARCHAR2(30)     DEFAULT USER
I create a single table for handling errors for all tables.
I just want to Get the table name where I used dbms_errlog.
I want to get table_name where I performed last DML Statemet?
Edited by: Nilesh Hole on May 24, 2010 4:50 AM
Edited by: Nilesh Hole on May 24, 2010 4:57 AM
Edited by: Nilesh Hole on May 26, 2010 3:43 AM

I should have written "you should not" rather than "can not." The advice holds.
The point of using the package in its default mode is that you can fix the problems.
Do it generically and all you learn is that an error occurred.
SQL> select * from ERROR_LOG_SERVERS;
ORA_ERR_NUMBER$ ORA_ERR_MESG$                                      ORA_ERR_ROWID$     OR ORA_ERR_TA
              1 ORA-00001: unique constraint (UWCLASS.PK_SERVERS)                     I
                violatednot much useful information.
But I appreciate you posting the idea so I show on my website why doing this is a bad idea.

I have lost all volume and sound from my iPhone 4S, even tho its on loud and I have checked all my settings. How do I get the volume and sound back on?

I have done all checks, rebooted my phone but I hVe lost all sound from it. When i play videos/ music... My key sounds have gone everything!
I've checked my settings they are all set to loud... What else can I do?

After wiping it, you need to re-activate it. If it is carrier locked, you will need to activate it on the network it is locked to.

How do I get the WebLogic server to use the XMLRegistry?

I'm using WebLogic 7.0.2, and I want to use the Apache TransformerFactory and DocumentBuilderFactory
instead of the default weblogic.* classes. I've found the documentation, where
I define an XML Registry as follows (snippet from my config.xml)...
<Server ListenAddress="####" ListenPort="####" Name="myserver"
NativeIOEnabled="true" ServerVersion="7.0.2.0"
StdoutEnabled="true" StdoutSeverityLevel="8"
StuckThreadMaxTime="14400"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="CT XML Registry">
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="myserver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileName="myserver/myserver.log" Name="myserver"/>
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="###" Name="myserver"
ServerCertificateFileName="democert.pem"
ServerPrivateKeyAlias="demokey" ServerPrivateKeyPassPhrase="{3DES}gAuVwsR68oAlLdIfO1PAtw=="/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="DefaultWebApp"
LogFileName="myserver/access.log" LoggingEnabled="true" Name="myserver"/>
</Server>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
Name="CT XML Registry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl"
TransformerFactory="org.apache.xalan.processor.TransformerFactoryImpl"
WhenToCache="cache-on-reference"/>
I've played aorund with xercesImpl being in and out of classpaths, etc. But no
matter what I do, calls to TransformerFactory.newInstance creates an instance
of weblogic.xml.jaxp.RegistrySAXTransformerFactory and DocumentBuilderFactory.newInstance()
creates an instance of weblogic.xml.jaxp.RegistryDocumentBuilderFactory.
I don't want to use these classes, and supposedly I can control which classes
I will use, but it's not working for me. Has anyone been able to get this working?
Is there anything else that I'm missing?
Thanks,
Ed

I was unable to use the XMLRegistry touse the Xerces2 libraries with WebLogic 7.
I did find in WebLogic 7 doco that the latest release of Xerces that it would
internally support was 1.4.4 (http://e-docs.bea.com/wls/docs70/xml/xml_admin.html#1066271).
If I wanted to use this version of Xerces, I would need to use WebLogic 8. This
is not an option for me at this stage.
So, I used this approach. When starting the WebLogic server, you can assign ClassPath
entries to an environment variable called PRE_CLASSPATH. This will prepend the
class path used by the App Container's JVM with the values in the variable. I
added the xercesImpl and xalan jars to this entry.
Because the WebLogic class loaders will always defer to the parent class loader,
it will check this class path first. So now I can directly instantiate the apach
implementation classes (typecasting them back to their API interface definitions)
and use them within the container.
"Ed Hillmann" <[email protected]> wrote:
>
I'm using WebLogic 7.0.2, and I want to use the Apache TransformerFactory
and DocumentBuilderFactory
instead of the default weblogic.* classes. I've found the documentation,
where
I define an XML Registry as follows (snippet from my config.xml)...
<Server ListenAddress="####" ListenPort="####" Name="myserver"
NativeIOEnabled="true" ServerVersion="7.0.2.0"
StdoutEnabled="true" StdoutSeverityLevel="8"
StuckThreadMaxTime="14400"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="CT XML Registry">
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="myserver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileName="myserver/myserver.log" Name="myserver"/>
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="###" Name="myserver"
ServerCertificateFileName="democert.pem"
ServerPrivateKeyAlias="demokey" ServerPrivateKeyPassPhrase="{3DES}gAuVwsR68oAlLdIfO1PAtw=="/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="DefaultWebApp"
LogFileName="myserver/access.log" LoggingEnabled="true" Name="myserver"/>
</Server>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImpl"
Name="CT XML Registry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl"
TransformerFactory="org.apache.xalan.processor.TransformerFactoryImpl"
WhenToCache="cache-on-reference"/>
I've played aorund with xercesImpl being in and out of classpaths, etc.
But no
matter what I do, calls to TransformerFactory.newInstance creates an
instance
of weblogic.xml.jaxp.RegistrySAXTransformerFactory and DocumentBuilderFactory.newInstance()
creates an instance of weblogic.xml.jaxp.RegistryDocumentBuilderFactory.
I don't want to use these classes, and supposedly I can control which
classes
I will use, but it's not working for me. Has anyone been able to get
this working?
Is there anything else that I'm missing?
Thanks,
Ed

Lightroom just created a new 2014 folder to receive images from 2014, but I already have a 2014 folder which has received all my previous images. How do I get the system to keep using the original 2014 folder?

How do I route newly created images into my existing folder for 2014? Why did the system create a new folder which seems to be snatching all my new images?

Well, something is not making sense here, and I might have to spend some time thinking about it, or hopefully someone else will know exactly what the issue is.
The first screen capture you provided shows the Lightroom Folder Panel, with folders on the C: drive named 2012, 2013 and 2014 and then the problem second 2014 folder, followed by many folders whose name begins with "My Canon".
The most recent screen capture you provided shows the C: drive problem 2014 folder, but none of those other folders!
Can you show us a screen capture of your Windows Explorer C: drive folders? Particularly, can you expand the folder structure so that it shows where the 2012 and 2013 and original 2014 folders and the problem 2014 folder are located? If that takes 2 or more screen captures, that's fine. ALso, if you can show the "My Canon" folders, please do.

How do I get the app store to use my debit card?

Okay so when I first got my Mac Book it was linked to my Dad's account so therefore everything comes out of his account whenever I purchase an App from the App Store. I did try linking my own debit card to my apple ID by going to where it says you can change your billing information and adding my card information. So after that I tried purchasing something but it didn't work because I checked my online banking and it is still the same amount it was before I purchased it. Does anyone know what else I can do? I would really like to switch my apple ID to my account. My debit card is a Visa if that matters.

Hello Moondust797,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Best of luck,
Mario

How do I get the microphone back to use for messages and emails?

I downloaded ver 8 and I have lost the microphone that I had with V 7. The microphone on the messages doesn't work and I don't see any microphone for use with emails. I have emotes which I don't use!

Try going to settings and make sure the internal mic is on. Anyway, the emojis are a built in as a part of iOS 8. To turn them off go to:
Settings - General - Keyboards - Keyboards (2) and swipe left on emoji to delete the keyboard.
Hope this helped!

How can i get the HTTP header info using Java

Hi,
I kinda need to extract the HTTP header info from a page that i goto through a URL objecrt and socket. Java.
Can someone please help me.. thanks!!!!
System.out.println("Enter URL : ");
String getAdd; // The URL that the crawler begins at.
// Manually take in URL
Scanner sc = new Scanner(System.in);
getAdd = sc.nextLine();
URL myURLobj = new URL(getAdd);
String hostName = myURLobj.getHost();
Socket s = new Socket(hostName, 80);

URL url = new URL(getAdd);HttpURLConnection conn = (HttpURLConnection)url.openConnection();
Map<String, List<String>> headerFields = conn.getHeaderFields();

HT5622 I have changed my appleID and password through my laptop. I have then changed it on my iPod Touch in settings. When I try to update my apps on the ipod touch it keeps throwing up the old appleID. How can I get the iPod Touch to use the new ID?

I have changed my appleID and password through my laptop. I have then changed them in my iPod touch settings in "iTunes & App stores" When I try to update my apps it fails because it wishes to continue to use the previous ID. What do I have to do to make it accept the new ID?

Also
If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How do I get the robotic vocoder sound using evoc - Kraftwerk style?

Similar Messages

Maybe you are looking for