How do I get the volume to be the same on all songs in itunes?

how do I get the volume to be the same on all my songs in i
tunes?

maybe the check box Sound Check in iTunes > Preferences > Playback Preferences
will help?

Similar Messages

  • How can I get speaker volume contol in the toolbar on my iMac ?

    How can I get speaker volume contol in the toolbar on my iMac ?

    System Preferences - Sound - Click the box in the graphic below:

  • Can I change the settings for ALL songs in iTunes with 1 command?

    I'd like to set the volume for all songs to +100. Can I just select all songs and then change it to +100?

    Highlight all the songs in your library (ctrl+a, edit-->select all, etc.)
    Now right click one of the songs, making sure that all remain highlighted, and go to get info. Click Yes to the message that pops up. You should be able to adjust the volume in that window. Click OK when you are done. The volume should now be adjusted for all songs.
    btabz

  • How do I get my volume to work on the 4s

    How do i get my volume to work again on my 4s it just stopped

    Without more information on your problem all I can suggest is:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How do I get more volume when watching a movie and can I use headphones?

    How do I get more volume when watching a movie? And can I also use headphones?

    Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.  
    I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
    I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
    http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

  • When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

    When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

    You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
    If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
    In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
    Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
    Then check, if you now are able to read the library properly on your iMac.
    Regards
    Léonie

  • I tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • HT1688 When I take pictures using the front camera the photo saves as if it were flipped in the opposite direct. How do I get it to saved as the picture was originally taken?

    When I take pictures using the front camera the photo saves as if it were flipped in the opposite direct. How do I get it to saved as the picture was originally taken?

    If you are talking about landscape pictures, hold the phone so the camera is at the top and the volume buttons on the bottom. If you hold it with the volume buttons on the top, the camera is upside down.

  • How do I get a volume discount on a book in Aperture?

    How do I get a volume discount on a book in Aperture, I want 115 of the same book.

    There used to be a discount, if you ordered more then 10 books at once, but I see it no longer listed on the "Options and Prices"-Page http://www.apple.com/aperture/resources/print-products.html, maybe that differs between countries, see also this post by Niel: Re: Reductions for bulk orders?

  • My iPhone 4s was working fine yesterday but today, the volume has stopped working entirely. A song will play for approximately 9 seconds and then will cut the sound completely. It has done this on YouTube, Music, and my ringer. How do I fix it?

    My phone played music fine yesterday. Today, headphones plugged in or not, my music (including YouTube and ringer) stops working. The timer still counts up as though it is still working but the volume turns gray or not at all and the little circle volume control disappears. How can I get my music working again?

    Hello ladypinecone,
    Thank you for using Apple Support Communities. 
    The following article provides you with information to troubleshoot sound issues with your iPhone. 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Regards,
    Jeff D. 

  • How can I get a new copy of the Voicemail app for my LG Spectrum?

    How can I get a new copy of the Voicemail app for my LG Spectrum?  It no longer works....the screen say Loading please wait....the
    !Visual Voice Mail - A Visual Voice Mail error has occurred.  Please try again. OK   I've tryed several times with the same message.  I've
    deleted the app from my screen and replaced it from the Apps Library....still the same message.
    I cannot find an answer on MyVerizon.  Any ideas?
    Thank you,
    Dee

    OK, at least 3 is working.
    I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
    Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
    Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
    You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
    If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • How do we get Apple to respond to the CD burning problem?

    How do we get Apple's answer to the problem so many of us are having burning CDs?

    Apple responds to problems with their software though KnowledgeBase articles and/or software updates. Except on very, very rare occasions, Apple tech support people will not respond in the Discussions forums. If you want to communicate with Apple tech support directly, you would have to call their tech support forum (the call will not be free).
    Have you seen this KB article?
    iTunes for Windows: Additional troubleshooting for burning issues
    It may not help, but if you haven't seen that article, it's worth a look.
    You might also try as a temporary test disconnecting the Lite-On drive and setting the Samsung as master and then see if you can successfully burn from iTunes.
    Regards.

  • This is about iPhoto:  I need to print the FULL IMAGE as shown on the screen:  the image is SQUARE (equal on four sides).  iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE!  How do I get what I see on the screen in print form???

    I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides).  iPhoto keeps cropping it into a rectangle - this is not acceptable!  How do I get what I see on the screen into print form?

    Like Terence explained:
    OT

  • How do I get my printer to match the colours of the image as I see it on screen?

    How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

    You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
    The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
    Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

Maybe you are looking for

  • Error while building report

    I need to create a report that have 2 columns, which are sum of sales and count of customer (from 2 difference tables). where i create a caculation-->COUNT_DISTINCT(customer_id) and sum of sales. I hit the below error :- "Invalid Combination of joins

  • How to get notified about new post created for Oracle istore

    I want be active part of post created in iStore or EBS. How can I get immediately get notified (email) about new post created in iStore or EBS (OTN Forum)? Currently I get immediate email about post that I am watching ie post I created or if someone

  • IPod nano 2g memory

    how much memory does the Ipod nano 2g, comes with? i heard that the games, notes and all the extras, even the os use some space in the 2g flash memory

  • Display the HCM Form in Webdynpro

    Hi all, I have a HCM processing form, which I need to display in the Web dynpro application through Interactive form UI element. To do this I am binding the Template ID (I am getting the template id from tcode - PHAP_CATALOG ) with the data source of

  • VI of the Day (9/3/2009)

    Today I'll throw out a VI that I happened to discover on a random walk through the palettes.  The VI is "Search Ordered Table.vi".  Is it just me, or is it vaguely similar to the "Threshold 1D Array" function (only slightly less functional)?  Is ther