How do I get these threads to open at the most recent post?

This is most annoying: every time I get an email notifying me that there's a new post in a thread I'm following, when I click on the link to go to that thread it sends me to the TOP of the thread and not to the post I was clicking about.
What am I doing wrong and how do I correct this?

Well,  I tried it with your post, Klaus, and it seemed to work correctly. Maybe it's just me. When I see an invitation in the email to click on a link to REPLY to a message, I don't click on it, because I don't want to reply to that message. I just want to read it. I might THEN want to reply to it  but I also might not. Maybe I'm just stupid that way.
In future, I'll pretend to myself that I actually want to REPLY to every post for which I receive a notification.
But each time I do that, I'll think about the cutlery drawer in the kitchen at Cupertino, and I'll wonder if all the knives in there are perfectly sharp.
Thanks, folks.

Similar Messages

  • How can I get FF to alt+tab to the most recent page and not the oldest as it does in winxp and previous versions od FF?

    Previous versions of FF cycle through pages in the order of most
    recent first as in WinXP when ALT+TAB are pressed but now it seems that the oldest is opened first. I have toggled the item suggested in
    ABOUT:CONFIG but this has no effect. there have been numerous
    suggestions using addons etc. but surely there is a way to reverse
    the order of ALT+TABBING by some other, easier, means.

    You can set the Integer pref <b>browser.link.open_newwindow.override.external</b> to "<i>1</i>" on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config
    The browser.link.open_newwindow.override.external pref uses the same values as this pref for JavaScript window.open() calls.
    *http://kb.mozillazine.org/browser.link.open_newwindow.restriction

  • How do I get IE 11 to open in the same window on the task bar?

    How do I get IE 11 to open in the same spot on my task bar.  i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar.  Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
    right at there location on the task bar; not in a new place at the end of the task bar.
    How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
    Thanks

    Hi,
    Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
    If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • How do I get my iPad to open to the lock screen and NOT the passcode panel when I open my cover

    When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it.  When I click on that and try to UNcheck it, nothing happens.  How do I get my iPad to open to the lock screen

    When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it.  When I click on that and try to UNcheck it, nothing happens.  How do I get my iPad to open to the lock screen

  • AirPort quits unexpectedly and a reboot is necessary to get it back. I installed the most recent AirPort software, but it didn't resolve the issue (v10.5.8). Has ideas? Thanks in advance.

    AirPort quits unexpectedly and a reboot is necessary to get it back - installed the most recent AirPort software but it didn't resolve the issue (v10.5.8). Any ideas? Thanks in advance.

    Open a Finder window. Select MacintoshHD in the Sidebar on the left then open the LIbrary folder, then the Preferences folder, then the System Configuration folder.
    Move all the files from the System Configuration folder to the Trash.
    Restart your Mac. Try AirPort.

  • How to restore from a session that is not the most recent

    I used the Forget button and it closed out of my windows and opened a clean window. I've started up and closed out of Firefox several times since then so using any type of 'Restore Previous Session' option won't work because the tabs I want aren't the most recent. The ones that I want were what I had before I clicked the forget button. I want to know if there's a way to restore from past sessions.

    Sorry, but not. Because the function of this button is exactly like if you made clean record.
    Grettings!

  • How to I get new tabs to open to the correct home page?

    When I open new tabs they just go to a Google Search page, which is very frustrating, especially when I open a new tab and try to type in the URL bar but as soon as it finishes loading Google it blanks out what I typed in and goes to the Google site. In other words, "blank" new tabs do not open to the Favorites page or even my home page. They open to Google. How do I change that? In other words, how do I get new tabs to stop opening to Google and start opening to either my home page or the Favorites screen? Thanks!

    You can modify the <b>browser.newtab.url</b> pref on the <b>about:config</b> page and set it to the desired page to open.
    *http://kb.mozillazine.org/about:config
    See also this article about the New Tab page (about:newtab):
    *https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do I get pop-ups to open in the same screen Firefox is on?

    I have 3 monitors at work for the 10-15 programs/windows I need open all day. The problem is that my normal work requires a pop-up from our company's ticketing system, hosted on a website. That pop-up always occurs on the upper left-hand corner of the main display while Firefox is open on the second display. ***I'd like it to open in front of the current Firefox window*** instead of on a completely different display. How can I achieve this?
    Before you say "Move Firefox to the main display", I'd like to add that I'm using Citrix for multiple other programs and it has the same annoying habit. I can't have them both on the same display since I need to see them both at once. I'm also trying to find a solution for Citrix doing this. Whichever app gets fixed first gets a home on the second display.

    Similar question posted Monday (unsolved): [https://support.mozilla.org/en-US/questions/966422 How to open new windows on second monitor].
    That user's company policy preventing using new software to solve the problem. Do you have any restrictions on possible add-ons or utilities?

  • In a multiple monitor situation, how do I get popup windows to open on the same monitor as the parent application is displayed.

    I have two monitors. I have an application that I run all day, displayed on my secondary monitor. Whenever a popup windows is launched form that application, it always opens on the primary monitor. Very annoying. Any way to get the popup to launch in on the same monitor as the parent application?

    Did you solve this problem ?

  • How do I get new tabs to open at the end of the tab bar rather than next to the tab i am working on?

    Im running firefox 3.6.12 on a pretty dated computer. Im using Windows XP Home Edition SP3
    On previous FireFox editions, opening new tabs from pages Im working on, used to appear at the end of the list of tabs. Now when I open it, it appears right next to me.
    Is there a way of altering this setting? I often open multiple tabs from the same page by clicking a link with the mouse wheel and I like to work through them in the order I clicked them. This is usualy for comparing things like holidays, car insurance etc
    thankyou

    You can change a preference to make tabs open
    # at the end of all open tabs
    # immediately after the current tab.
    See: http://kb.mozillazine.org/About:config
    *Type '''about:config''' in the URL bar and press the Enter key.
    *If you see the warning, accept it (promise to be careful).
    *Filter = browser.tabs.insertRelatedAfterCurrent
    *Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
    *Double-click that preference to toggle the value from true to false, or false to true
    *Restart Firefox (File > Restart Firefox)
    See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/
    <br />
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Windows only Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #***Choose your language
    #***Download the file
    #***Windows: choose the .exe version
    #****NOTE: '''At this moment''', using this method, only the incremental update is available on the Adobe FTP server; download the .msp file under the "misc" folder, save it to your hard drive, exit Firefox, run the installer file and Windows Installer will install it for you.
    #**'''<u>OSX, Linux and Solaris Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    #* After the installation, start Firefox and check your version again.

  • How do I get App Tabs to open on the bookmarked location rather than the last visited one?

    For example, I have YouTube as an App Tab. Every time I open firefox the last think I was watching on YouTube starts playing again. I would really like to set it so the App Tabs open on whatever page I originally set them for.

    Just make sure that you open any new links in a new tab and not in the App tab.<br />
    There are tab related extensions that can protect or lock tabs to prevent them from getting changed, but opening a link in a new tab with a middle-click or Ctrl + left-click isn't that much extra effort.

  • HOW CAN I GET NEW LINKS TO OPEN IN THE EXISTING TAB?

    When clicking on a link, I would like it to open in the SAME tab. I have not been able to accomplish this no matter how I set the tab options. Can anyone help?

    As of five minutes ago, ''every single'' link I click opens in a new tab. This includes clicking the refresh button.

  • How I can get a JFrame to open in the middle of the screen?

    Okay, I have been looking for an answer on how I can make a JFrame open in the center of the screen like the JOptionpane's "null" argument does. Maybe, I am putting the wrong words in the search but I can't find any help on this.
    Thanks
    ***Sample***
    import java.awt.FlowLayout;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    public class JFrameProb extends JFrame
         private JLabel someText;
         private JLabel someText2;
         private JLabel someText3;
         public JFrameProb()
              super("Why is this always going to the Corner?");
              setLayout( new FlowLayout() );
              someText = new JLabel("This Window Popped open in the top-left Corner...");
              add(someText);
              someText2 = new JLabel("Is there a way to open in the Center of the Screen?");
              add(someText2);
              someText3 = new JLabel("I know JOptionPane does.");
              add(someText3);
    }

    JosAH,
    I tried using your code but it errored out:
    C:\Program Files\Java\jdk1.5.0\PimpThatHo\PimpNameGetter.java:78: cannot find symbol
    symbol : variable Centralizer
    location: class PimpNameGetter.TextFieldHandler
    Centralizer.centralize(comboBox);
    ^
    1 error
    Process completed.
    So I made a java file for the Cebtralizer Class but it gave me this:
    --------------------Configuration: <Default>--------------------
    C:\Program Files\Java\jdk1.5.0\PimpThatHo\Centralizer.java:3: cannot find symbol
    symbol : class Component
    location: class Centralizer
    public static void centralize(Component c) {
    ^
    C:\Program Files\Java\jdk1.5.0\PimpThatHo\Centralizer.java:5: cannot find symbol
    symbol : class Dimension
    location: class Centralizer
    Dimension screenSize= Toolkit.getDefaultToolkit().getScreenSize();
    ^
    C:\Program Files\Java\jdk1.5.0\PimpThatHo\Centralizer.java:5: cannot find symbol
    symbol : variable Toolkit
    location: class Centralizer
    Dimension screenSize= Toolkit.getDefaultToolkit().getScreenSize();
    ^
    C:\Program Files\Java\jdk1.5.0\PimpThatHo\Centralizer.java:6: cannot find symbol
    symbol : class Dimension
    location: class Centralizer
    Dimension compSize= c.getPreferredSize();
    ^
    4 errors
    Process completed.
    I know I am missing packages but I don't know which ones.
    Roman03_

  • How do I get numbers spreadsheets to open at the last entry?

    I work with Numbers spreadsheets often and find it very frustrating that on opening a document it opens at the top rather than at the last place of entry. My frustration is that some of the spreadsheets I work with are fairly long and require me to then scroll down a long way to pick up the spot I want to work in. Any ideas would be gratefully appreciated. Thanks in advance

    Hi Barry,
    the view scale bug was on the list for an early fix
    Fixed in the latest update (Numbers 3.0.1)
    Numbers > Preferences > General > Default Zoom:
    And it sticks with a document after Save . Reopen shows the Saved view.
    Regards,
    Ian.

  • How can I get my Report to open on the fist tab always when file opened

    Hi,
    I have one report with mutiples tabs, however I would like my file SWF/PDF to always open on the fist tab. Any ideas?

    I believe the SWF will open to whichever tab you had active at the time you exported the dashboard.  So if you want your SWF to always open to the first tab, just make sure that the first tab is the active tab when you export your dashboard to a SWF.
    Hope this helps,
    Jeff

Maybe you are looking for

  • Oracle XE and 10g reports

    Can this be done? have installed XE, and have been using HTML DB. I am wanting more control with my reports, and I am much better with 10g reports developer than the built in html db reports. I found this site, but I am stuck on "deploying the report

  • Will deleting photos in My Photo Stream erase photos in my Camera Roll?

    Will deleting photos on My Photo Stream erase photos in my Camera Roll?

  • Regarding how to pass values to the fields of a screen.

    Hi  all :      there is a field called approver on screen. I'd like to pass value to it ,      may I use the statement  like      approver-text = 'xxx'. ?      is this ok?      Thanks for any of your reply.

  • PLM - Engineering Change Management - ABAP Development

    Engineering Change Management Program: SAPMC29C Transaction:CC02 Change Master Valid From date once expired (Protected Time Period) – Not able to change by the user Requirement is to change the valid from date to New date from custom program even if

  • How to call gnuplot command from java

    Hi there, In our course, we are required to develop an GUI for gnuplot. In case you don't know about gnuplot, it's a plotting program and has lots of command. We want to use java and swing, but now we don't know how to call gnuplot command from java,