How do I get to a sub menu when video is playing?

when I have navigated to a Chapter Index submenu and am playing a chapter, I want to be able to return to that submenu if I hit the menu button. right now it only returns to the main menu. How do I direct the focus back to the submenu?
This could be from either a track or a story.
Thanks
Powerbook G4   Mac OS X (10.4.1)  

I think that Eric has it wrong. If you test exactly what he suggests you will still be taken back to the first menu when you press the menu button.
Ideally you want to return to the same menu that you started from, and with the same button highlighted. In some cases you might want to highlight the following button, on the assumption that the user is progressing through some videos, but in most cases I think you want the same button to be highlighted.
In the outline list, select any item that can be jumped to, whether it's a track or a story. When it's selected look in the inspector, and set the Menu button option in the Remote Control area to take you back to exactly the menu and button that would take you to that item in the first place.
Also set the end jump for the item to be the same menu and button.

Similar Messages

  • HT3180 how can i get to the main menu to watch netflix?

    how can i get to the main menu to watch netflix?

    Sorry that you are having this issue. Here is a link that may assist you with the problem. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02677483&tmp_task=useCategory&cc=us&dlc=en&lc=e​...
    In your printer settings, do you have WIRELESS SETUP or WIRELESS SETUP WIZARD?
    The SSID is the name of your network. When the printer searches for a network, it finds your SSID, and you choose it. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Qosmio X70-A-K2S - How do I get to the BIOS menu?

    Hello!
    I have a laptop Qosmio X70-A-K2S.
    I want to replace one of the hard drives on the SSD.
    How do I get to the BIOS menu?
    Recommendations from the user manual (reboot and release F2 for 1 sec.) do not help.
    I can not get any BIOS menu or BOOT menu.
    But easily fall into the recovery menu by pressing the 0.

    >Recommendations from the user manual (reboot and release F2 for 1 sec.) do not help
    Sure this is right is Win 8 preinstalled?
    Probably this is the reason why you cannot access the BIOS.
    The Windows 8 does not shut down the notebook by default but it perform hybrid shut down.
    This allows to boot the notebook much faster but as I said, it prevents accessing the BIOS.
    Take a look here how to perform shut down on Windows 8 preinstalled notebook:
    [Perform a complete shutdown in Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]
    Greets

  • HT4929 how do I get ICloud on my menu bar for email only?

    how do I get ICloud on my menu bar for email only? I have snow leopard so I do not have all the requirements for I Cloud.

    I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.

  • The last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

    the last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

    Use the Subfolder pulldown to set the subfolders:

  • How do i get passed choose a menue,I have finished editing rendering unable to go to Burn directly to disc, Help would be appreciated, thankyou Gordon

    How do i get passed choose a menue,I have finished editing rendering unable to go to Burn directly to disc, Help would be appreciated, thank you Gordon

    Gordon
    Thanks for the additional information.
    After you have your Timeline content ready for export with destination burn to disc, if you do not go to Tools Menu/Movie Menu to apply disc menus and you go instead directly to Publish+Share/Disc, you will get an automatic message for a Yes or No answer with regard to disc menus.
    If you do not want menus, then just click No and you should next see the following
    where you make your burn to choice.
    The Yes or No message should be for Publish+Share/Disc and not Publish+Share/Computer.
    You cannot export a file with menus to the hard drive.
    If you went Timeline content, Tools Menu/Movie Menu, and applied a menu, and then decided that you do not want a menu, the go to the top of the Movie Menu customization area and click on Reset, followed by Done. And, then go to Publish+Share/Computer and your choice for the export to file saved to the computer hard drive.
    Please review the above and let us know if you are OK with the above details.
    Thank you.
    ATR

  • HT5517 how do I get airplay in my menu bar?

    how do I get airplay in my menu bar?

    Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 or later.

  • How do I disable the brushes popup menu when I left click in Photoshop CS5?

    How do I disable the brushes popup menu when I left click in Photoshop CS5? I am trying to use the clone stamp and I am not able to get a sample because of this popup menu.

    LOL,  I can't even begin to complain with the number if times I misread questions, and then try to break my own record for the number of typos in a single post.
    The image above was taken on a photgraphic weekend where the group (of all young ladies ) I was travelling with, set us a photography challenge.  The one above was my response to a 'faceless portrait'.  The only other one I attempted was this response for a picture of a 'wild animal', featuring camera club president Liz.
    Oh what fun we had, laughing and laughing until our faces fell off.
    [EDIT]  Both taken at Karamea, which some visitors to NZ might recognise as the western end of the Heaphy Track.

  • HT4528 My friend switched from an iphone to a non apple phone. All my texts to him in groups and one on one still come up as imessages. How do I get rid of the imessage when i talk to him? I have tried deleting his number, deleting all messages he was apa

    My friend switched from an iphone to a non apple phone. All my texts to him in groups and one on one still come up as imessages. How do I get rid of the imessage when i talk to him? I have tried deleting his number, deleting all messages he was apart of

    Did you try to unregister the phone?
    Check this discussion

  • How do I get my wife's photos and video from her iCloud to my iPad?

    How do I get my wife's photos and video from her iCloud to my iPad. She no longer has an iDevice and I want to retrieve some really sentimental photos and videos of my grandson. I've logged on to her iCloud account on my iPad, but don't know what to do next.
    Thanks
    Tony

    Her camera roll photos and videos would be included in her backup.  Restoring her backup to the iPad should recover them.
    Start by creating a current backup of your iPad that you can restore your data from later.  It's faster if you do this on your computer using iTunes; if you can't, create a backup in your iCloud account.  If you can back up to your computer, do this by connecting the iPad to your computer, opening iTunes and going to File>Devices>Back Up.  Then go to File>Devices>Transfer Purchases.
    Then erase the iPad and restore her iCloud backup as explained here: https://support.apple.com/kb/ph12521.  When it's done, import the recovered photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083.
    Then erase the iPad again and restore the backup you made earlier, either from iTunes or from iCloud depending on where you backed it up.
    If you want the photos back on the iPad, put them in a folder and sync them to your iPad by selecting the folder on the Photos tab of your iTunes sync settings and syncing.  If you want to videos back on your iPad, import them to your iTunes library (File>Add to Library), then sync them to your iPad from the Movies tab of your iTunes sync settings.  You will then find them in the Home Movies section of the Videos app on your iPad.  Just so you are aware, photos that you sync to your iPad can only be removed later by syncing them off your iPad (by deselecting the folder on the Photos tab and syncing again).  They can't be deleted on the iPad itself.

  • Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on iTunes, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything, how can I stop this. please help!thx

    Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you

    Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
    Also see:
    iTunes Store: Associating a device or computer to your Apple ID
    since you may have started the 90 day window.
    For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing.

  • How do I get recover disc for vista when system will not boot???? For Pavilion pc a6157c

    Pavilion pc a6157c   How do I get recover disc for vista when system will not boot????

    Read THIS HP Support Document concerning ordering recovery discs for your HP a6157c. Go to THIS HP webpage to order the "Vista Home Premium 32bit 73NAv3PrA1 + Supp 4 Recovery Kit" for your computer. If you are not looking to order the recovery discs or have some other issue with your computer, please provide detailed information concerning the problem.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...

    (Running Business Objects Release 2 (Web-I), No other reporting modules)
    How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...
    In my reports, I count the number of tests of one of our products and another count on the number of failures.  I then use a simple formula to give me the defect rate percentage (DR%)
    The universe objects used in the calculation are:
    Assembly Number (dimension)
    Human Sn (dimension)
    Test Code Description (dimension)
    I created a variable (called [Count Assys]) that counts the number of Assemblies Tested:
    Formula: =Count([Assembly Number];All)
    Another variable (called [Failed Count]) counts the number of failed tests:
    Formula: =Count([Test Code Description];All) Where ([Test Code Description] <> "FUNCTIONAL TESTS PASSED")
    NOTE: There is a "not equal to sign" between [Test Code Description] and "FUNCTIONAL..." above, but the forum is blanking it when I preview the message.  Not a big deal, but it may be important for someone looking to help...
    I then have a third variable called [DR%] that divides [Failed Count] into the number of [Count Assys], which yields a number formatted as a percentage.
    Formula: =[Failed Count]/[Count Assys]
    The above works great! 
    The problem is: when I have a zero defect count (everything passes), the cell is blank, so the percentage variable remains blank.  I want a zero (0) to appear if nothing failed so the percentage appears as 0%
    I've searched this forum completely and have tried several Properties changes and different variable strings (like =If([Failed Count]<1,0) and the cell stays blank and cannot come up with an answer.
    This one seems simple to me, but everything I've tried has yielded zero <smile> results.
    Thanks,
    Charles
    Edited by: Charles Norman on Dec 9, 2008 12:44 PM
    Edited by: Charles Norman on Dec 9, 2008 12:47 PM

    Hi Charles,
    Use [Dr%] Variable formula as =if(IsNull([Dr%]);0;[DR%])
    Here IsNull returns the Boolean value of variable [Dr%] if its true then inserts 0 else the percentage values of failed tests based on the  total number of assembly tests performed.
    I Hope this is what you want to achieve....
    Thanks....
    Pratik

  • I have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing

    i have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing a song while he is checking his phone. how do i get rid of it????

    If it happens again the make sure that you aren't suppressing website colors.
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *https://support.mozilla.org/kb/Options+window+-+Content+panel
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • HT1420 How can you get your iTunes music back when your iTunes Match expires & you no longer have access to the computer it ws stored on?

    How can you get your iTunes music back when your iTunes Match expires &amp; you no longer have access to the computer it ws stored on?

    Try here:
    iTunes: Error 13019 during sync

Maybe you are looking for