How do I get to have more than 20 columns in a table in adobe form?

I see that there is limitaion to not have more than 20 columns in my table in adobe form, Is there any way I can have more than 20 columns in a table in adobe form in landscape mode.

Hi,
That only relates to the Table Wizard. Once the table is placed on the page, you can add columns manually, from the menu or right-clicking on a column.
You can also use fields within a repeating subform (instead of the table object).
Good luck,
Niall

Similar Messages

Just how important is it to have more than one disk?

I'm confused about this. I've seen that, in some cases, having only one disk may be fine, even though it's reading and writing from/to the same disk. However, I've read countless times that it's very hard, with the music conductor analogy that I've seen several times, that it's not good at doing both at once. If I were to simply use two disks in regards to one (let's not go into the specifics of each disk), what speeds and where would be increased since reading and writing all to the same disk is no longer as much of an issue?

If I were to simply use two disks in regards to one (let's not go into the specifics of each disk), what speeds and where would be increased since reading and writing all to the same disk is no longer as much of an issue?
Compare it to moving from one house to another. A lot of stuff needs to be moved (you will be surprised how much stuff you have acquired in the course of years) from A to B.
Steps to be taken are:
Load the car or van with your stuff.
Drive from A to B.
Unload the stuff at B.
Reverse from B to A.
This continues until you have moved all your stuff to the new house.
While the basic steps remain the same, if you had two cars, the move would be done in half the time. If you had three cars at your disposal, the move would be done in a third of the time and so on.
A single car can only use D or R at a single moment in time. It can't do both at the same time. Once you put the gear in D, you can drive forward. If you want to reverse, you have to stop the car, first put it in N and then in R to reverse. The same with SATA disks. They can read data, have to stop, and then write, then stop and then read again.
The more cars (read disks) you have at your disposal, the quicker the move from A to B is accomplished. The faster each car (disk) is, the quicker. Of course this requires some planning. It is no use to have all cars waiting in line to load the stuff at A and none unloading at B at that same moment. It also makes no sense to spend time loading a huge couch or chest into the smallest car available, when it could be loaded easily into the big car or van that is waiting next in line. Just load only small stuff into the small car, like silverware or porcelain and let the big stuff to the big car(s). Think file type allocation.
There is not much you can do about rush hour traffic jams, apart from planning the move outside rush hour. Think 'tuning'.

How do you handle it when more than one signature is required on a form?

We have a situation where we are trying to replace pen and paper where both the employee and their supervisor must sign off on a form before is comes to us. Do you have a recomended way of accomplishing that? Could the completion of the first form result in the creation of a pdf that would have a second degital signature?
Thanks for any and all ideas!

Hi,
You may want to check the EchoSign site: https://www.echosign.adobe.com/en/home.html
and post your question to the EchoSign forum: http://forums.adobe.com/community/echosign
Thanks,
Lucia

How can I synchronize safely from more than one computer?

First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

You cannot do what you want.
The ipod touch can sync with ONE computer/library at a time.
When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
This is the way it is designed.

A header data can have more than one lie item data !

How can a header data have more than one line item data ?

Hi,
header table will have only main data where as the item data will have material delivery date other things based on the availabilty and committement
http://help.sap.com/saphelp_srm30/helpdata/en/38/4cc5376848616ae10000009b38f889/content.htm
Regards
Shiva

How to avoid overlapping of Table on another table in Adobe Form

Hi Experts ,
Can anyone tell me how to do this scenario,When I am inserting 3 flowable tables in Adobe form ,issue is one form is overlapping over another, All the internal tables has 10 records minimum. Requirement is after one table is printed Next table should be start printing without overlapping on next further table... Please let me know How to avoid overlapping of table on another table.Advance thanks.
Thanks & Regards
Sandesh

Hi Sandesh.
Put your table in subform. (one for each)
And than add one more subform and include all 3 table's subforms in single subforms.
All subforms should be flowed.
With Regards,
JP

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

HT1386 We have more than one computer at home. How do we get the songs from each computer onto one I-Pod?

We have more than one computer at home. How do we get the songs from each computer onto one I-Pod?

Copy the songs to a computer that is running iTunes, add those new tracks to the current library, and then synch those tracts to the iPod.
You might take a look at iTunes Help....

I seem to have more than one apple ID. How can I get rid of old ones?

I seem to have more than one apple I D. Apple keep rejecting my password so I create new one. iPhone still seemd to use original ID. Apps get attached to old IDs. Can't log into game centre on old ID or use my nickname. Says its already in use! By me!

Roger. Can you drop in to HT4436 Multiple iCloud accounts on OS X: Apple Support Communities and see if you can help the OP? Thanks,
OT

HT1420 i have more than 5 apple products. how can i get them to all be authorized under one id?

I have more than 5 apple products and I want to have them all autorized under one id. How do I do that for the itunes? It seems ridiculous that apple would limit me to 5 products or less.

The limit is 5 computers and as far as I know that can't be increased- are you including iPads, iPhones and/or iPod Touches in your products ? If so then they don't count towards the 5.

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

I have more than 300 CDs I downloaded into my computer which went to my iTunes library and have purchased hundreds of songs through iTunes store and can no longer access these songs. How can I restore my music so I can play it?

I have more than 300 CDs that I have downloaded to my computer and have purchased hundreds of songs from the iTunes store on my Mac. I cannot play any of this music now. How can I restore my iTunes library? I can see the music files, but they will not play. The message I get is that the file cannot be found. I have stopped purchasing any music from iTunes, and will not do so in the future unless this can be resolved. Why buy music if in the future you can't play it? I have not connected my ipod to my computer for months because of concerns that my music will disappear from there too.

What you see in iTunes is not the music but a pointer to the file that contains the music. Somehow these pointers have become broken. You may have accidentally deleted the file, or moved a folder, or moved a file, or renamed a folder, or renamed a file, or... iTunes is very unforgiving of you doing things to the iTunes folder unless you have it set so iTunes does not manage your music for you (in which case you really need to know how iTunes works)
If all your links are broken, or a large number are, then there are various options, none of them easy (unless you're lucky). One is when it asks you if you want to find the file that you say yes and then guide it to the file (which will probably be in a folder by artist, and then a folder by album name). Gets old fast if you have 300 CDs. Another is to undo what may have caused the links to become broken, if you can remember what it was that you might have done such as renaming a folder. Another is to just forget about your old library, ratings, and playlists, etc. and start afresh. Trash the library file in your iTunes folder, start iTunes with a blank library, then drag all your files to the new library. Another is to restore itunes from a backup you may have made before this happened.
Do you keep just media on an external drive? If you start iTunes without the external being switched on then it thinks the links are bad. Quit iTunes and start the external before restarting iTunes. You may have to scroll down through the tracks to "tickle" them into re-reading the link.
How do you have itunes set in preferences to manage your music? Have you done any changes to preferences recently, or moving folders, files, etc? Do you keep iTunes on an internal drive, or external?
In the many years of people complaining about broken links I don't think any way has been developed to mend them automatically. I saw one attempt to use Spotlight, but it didn't really work.
None of us work for Apple so it's up to you if you won't buy from them until it is fixed. We will try to help you fix it, because we're nice.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

How do you have more than 1 ipod in your family and only 1 computer to be able to each have a separate account?

HOw do you have more than 1 ipod int he family and be able to have your own itunes on 1 computer?

Did you read the support document at the other end of the link? What additional information do you desire?
The Apple support document How to use multiple iPods with one computer (n.b. same link as above!) suggests a number of ways for managing the media content. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iDevices using this system, each getting a different selection to suit their tastes and the capacity of their device. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed and need rebuilding. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

You CAN have more than 2 Cap1 - Here is how you find out

Many people have posted inquiring if you can have more than 2 Cap1 Cards..... I asked the Executive Repsonse team how I could find out if that was true and the fella told me that you just simply look at the Terms and Conditions on the website for each card and it will tell you. Its under "what may disqualify me", for example for a venture card it says having more than 5 capital one venture cards will disqualify you. As of today: I have Capital One Platium, Secured, Capital One Venture Card, and Capital One QuickSilver..... So just check the terms of service to see if it applies to you....... Enjoy!

jac8600 wrote:
Exactly what I am saying but we refer to them as signature and platinum. yes I said we......... Ummm.... Is there a hamster in your pocket?Actually its NOT quite the same at all. You cannot have two platinum (average credit) cards AND five signature (excellent credit) cards. The hard limit is five cards. If you have one PL and one Sig, you cannot get another PL card, but you CAN get three more Sig cards. Thats exactly where I'm at right now - I have a QS1 and a QS card, but my current scores don't qualify me for the higher tier cards yet, so I'm stuck. If you have two Sig cards you cannot get a PL card at all. The idea is to push you upward to the higher tier cards.

How do I get to have more than 20 columns in a table in adobe form?

Similar Messages

Maybe you are looking for