How do I get to start my program only if I hit a START button?

Hi there,
My idea on improving my program is to install a START button and that the program will only run if i hit it.
Even if i click on the RUN button, there were still be no effect until i click the START button.
I would be very glad to receive ideas to go about this problem.
Thanks.
Regards,
Aidah

If the program starts running, it will first enter wait loop containing your start button and a small wait statement. Pressing the start button will terminate the loop and proceed to the main code of your program.
That is the basic idea, expand as needed. (A more universal version would be a state machine where the start button will exit the pre-start wait state and enter the post-start state.)
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • HT4623 i have a blank screen. how can i get it started again?

    i have a blank screen. how can i get it started again?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • How can I get "Flash Player" setup program in English?

    How can I get "Flash Player" setup program in English?
    During instalation  I've got something that look like Polish or Czech, anyway not legible.
    It last for, aaaa ... 2 years ... sadly, no improvment at all.

    You could try the offline installers
    Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
    Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

  • Download for a movie digital copy stopped.  How do I get it started again?

    Download for a movie digital copy stopped.  How do I get it started again?

    Settings>General>Usage>Storage>Videos>Edit>Select movies to delete

  • My compaq presario CQ61-420US ONLY STARTS UP half way. How can I get it started all the way?

    my compaq presario CQ61-420US ONLY STARTS UP half way. How can I get it started all the way?

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive & memory.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Professionals, how did you get your start?

    I know there are many people on here who earn a living working as professionals. I was just curious, how did you get your start?
    I plan to attend Ohio University this fall to major in video production within the Scripps School of Communication. OU is well known for their school of communication, but obviously just having a good name behind your major doesn't guarantee a job.
    What did you do to make yourself more marketable to potential employers? Any other advice that you have to share?
    Thanks in advance
    D

    I started out as an apprentice editor on a feature film.  Got the job mainly because I fixed the director's assistant's computer during my interview.  Knowing how to use the Avid (thanks to film school) helped too. 
    I started at the bottom, and worked my way up.  Gaining knowledge as I went.  Apprentice editor, to tape vault manager, to post coordinator, to assistant editor, to online editor, back to assistant, then to editor.  6 years from the day I started apprenticing until the day I started editing a broadcast show.
    >What did you do to make yourself more marketable to potential employers?
    Learned the ins and outs of the edit systems. I could troubleshoot them if they were broken, and knew the workflows for multiple shooting formats.  Was able to make the decision on edit systems to use and workflows to employ when presented with the shooting format, and delivery specs.  I learned all that from on the job training, and trolling the web for resources.  And a lot of work on my own.
    >Any other advice that you have to share?
    Work your @$$ off!  If you think the job is below you, and act that way, you won't get hired again.  Don't think that you will start off right away as an editor, or DP, or director.  Starting out as an assistant is a great way to learn all that you need to learn to perform your job.  Because right out of film school, you don't know what you don't know.  But work hard, be dependable, and you will get hired again and again.

  • How do i get my windows phone to install OSx Maverick if my mute button doesn't turn my screen brightness up?

    How do i get my windows phone to install OSx Maverick if my mute button doesn't turn my screen brightness up?

    A little clarification, you're trying to install mavericks on your windows phone?

  • I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    TheAshburns,
    No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
    SandyS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I'm stationed and bought my iPad in Japan. How do I get my iPad to print only English (I keep getting Japanese text)?

    I'm stationed and bought my iPad in Japan. How do I get my iPad to print only English (I keep getting Japanese text)?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    How do I answer calls with the KITKAT update?  I hit the flashing button but it's still ringing?  Where are the Answer settings?

    Aha!  Thank you!!!  That was not obvious. Sometimes I don't get the green and red icons.  So it's slide it to the right for answering and slide to the left for voice mail.

  • How do I get the starter home screen back to showing the time and weather?

    The phone had showed the time and weather from the starter mode and now it doesn't. How do I get it back to showing it?

        We would be delighted to assist today Arkad! Do you mind sharing your current device? Let's get this resolved.
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • How can I get a greeting card program compatible with my MacOS X(10.6.3 ) ?

    I have been using PrintExplosion Deluxe for several years now, and used to make beautiful greeting cards. Now, when I try to use it, it crashes, almost immediately and all is lost. I have not reported it before, however, I just try again. I would like to be able to use it again, or is another mac. greeting card maker that would satisfy my needs. I have purchased Print Master from Broderbund but it is too complicated to make the kind of cards I used to use with PrintExplosion Deluxe. How can I get PrintExplosion Deluxe back to where it is working or is there a more compatible version given my model, MacOS status. Thank you.

    Contact the developer of the program for help with it. As for alternatives you might try looking at VersionTracker or MacUpdate. For example there's:
    The Print Shop
    Easy Card
    which should work with Snow Leopard.

  • How can I get another "Start Up" disc to restart my old Mac a G4 os x 10.4.11?

    Could a "Verify Disc" problem be setting off a "DNSChanger" warning from my Internet carrier, CenturyLink?   DNSChanger Remover tool v. 2 SecureMac 2008 comes up clean each time. I never had a "Start up" CD, and my TDK CD player won't print...

    Did you check your Router, I hear some of those can be infected?
    If you're using Wifi/Airport, what kind of Encryption is it using?
    If Verify Disk reports a problem, try this, but it's not very likely related to the DNS Changer problem...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Apple no longer has or sells 10.4 Discs with slight exceptions if your model came with a Gray Tiger/10.4.x Disc.
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710

Maybe you are looking for

  • ITunes has stopped working error message on opening iTunes.  How do I get passed this

    Every time I open iTunes I get the error message "iTunes has stopped working" and all I can do is close the program.  I have uninstalled iTunes and re-installed it but I get the same error.  I am working on windows 8.  Can anybody please help me to s

  • Problem in uploading a file to BLOB column in ADF

    Hi, I was trying to upload a file and storing into BLOB column in the DB. I was trying the exercise that was given in http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html85th sample application. When I was ru

  • Segregate internal ordered items from purch. order items for the i-pro user

    We want to know if there are any Oracle i-Procurement implementations that have segregated the internally ordered items via an Order Management sales order from items ordered on a PO (purchase order). We have considered three possible paths to purse.

  • Function module called for order report in pegging screen

    From MD04 when we try to find out the higher level production order it takes us to the planned ind req(PIR). In that screen, we have an "order report" button which takes us to the production order linked to the PIR. Can anyone please let me know the

  • Ship to address as per Warehouse

    Dear Experts, Please provide some valuable suggestions for the below issue : One of our client has been recently upgraded to SAP 8.81. Different warehouses are mapped with different addresses in Warehouse set up. In document settings - Option " Use W