How do I get to the iWeb code so I may add my megatags and keywords for better search visibility

Would like to maximize my iWeb made webpage on the web and utilizing megatags and keywords through my search engine.
They say I need to add these words after my header in the code...how do I find the code?

So you want to found but cannot find the information how to accomplish that?
Funny, to say the least.
Look at the right under the heading More like this.
And search this forum. See picture below :
Or wait for our resident SEO expert to tell you that for a fee.

Similar Messages

How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with our a computer

How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with out
a computer

Use a friend's computer. Your iPad will be erased.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

HOW CAN I GET TO THE PRINTER CODE?

HP Officejet 6500A printer - Windows XP. The problem is I am trying to set up ePrint and printing from mobile devices, etc. and I am unable to find the printer code. The printer was previously setup for use from the desktop and now I am having difficulties adding these other capabilities.

The thread here should help:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

How do I get to the home page of itunes for IPAD to see my account and my apps?

How do I get to the home page of itunes to see my account and the apps installed onmy Ipad or Ipod?

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

I have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too.

After downloading viber application , I was asked to enter my phone number without the country code, when I enter my phone number and pressed continue, I get this error "check setting notification" I checked it and it is on,how to get my viber code ?

After downloading viber application , I was asked to enter my phone number without the country code, when I enter my phone number and pressed continue, I get this error "viber can't access push notifications. Check settings > notifications. Check internet connection and try to register again. see viber.com/notifications for more info. I have checked the notifications and it is on also I have checked the internet connection and it is active, so what shall i do now to get my viber code?

Contact Viber customer/technical support.

How do I get to the request object in a webflow.

How do I get to the request object in a webflow.
I created a input process and one function it needs to do is create a cookie.
Problem is I don't have a response object.
How do I create/get the response object so I can create a cookie.
Thanks
Michael C Ford
------------------ Code Line ------------------------------------
public Object process(HttpServletRequest req, Object requestContext)
throws ProcessingException
// get the pipeline and namespace info for the process
PipelineSession pSession = null;
String namespace = null;
String username = req.getRemoteUser();
pSession = getPipelineSession(req);
namespace = getCurrentNamespace(pSession);
/* ***** DO THE INITIAL CREATE OF THE BEAN *** */
     try {
          Properties props = new Properties();
          props.put(
               Context.INITIAL_CONTEXT_FACTORY,
               "weblogic.jndi.WLInitialContextFactory");
          Context ctx = new InitialContext(props);
          Object homeObject = ctx.lookup("com.??.??PortalMgr");
          SeechangePortalMgrHome seechangePortalMgrHome =
          (SeechangePortalMgrHome) javax.rmi.PortableRemoteObject.narrow(
                                                  homeObject,
                                                  SeechangePortalMgrHome.class);
          SeechangePortalMgr portalMgr = seechangePortalMgrHome.create();
/* Set the initail user */
portalMgr.setUser(username);
          UserRuntime userRuntime = (UserRuntime)portalMgr.getRuntimeObject();
          System.out.print("Run Time User is " + userRuntime.getUserName());
          System.out.print("Run Time User is " + userRuntime.getOrgSeq());
// ** cookies for Actuate XXX=(customer sequence ID), YYY=ZZZ is a dummy per
their requirement
          Cookie cCustSeqNumber = new Cookie("XXX",userRuntime.getOrgSeq());
          Cookie cPassword = new Cookie("YYY","ZZZ");
          cCustSeqNumber.setPath("/");
          cPassword.setPath("/");
          ??response.addCookie(cCustSeqNumber);
          ??response.addCookie(cPassword);
     } catch (Exception ee) {
          System.out.print("Unable to create Portal Manager" + ee);
// at this point we add the logic to produce the bean
return "success";

Thanks
Just what I needed, except I needed to caste response.
Michael C
"Daniel Selman" <[email protected]> wrote:
Michael,
// get the HttpServletResponse from the HttpServletRequest
HttpServletResponse response =
equest.getAttribute( WebflowConstants.HTTP_SERVLET_RESPONSE );
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
response.addCookie(cCustSeqNumber);
response.addCookie(cPassword);
You HAVE the HttpServletRequest...
public Object process(HttpServletRequest req, ObjectrequestContext)
throws ProcessingExceptionMake sense?
Dan
"michael C Ford" <[email protected]> wrote in message
news:[email protected]...
How can I get to the response this way ?
this just stored the response as an attribute did it now ?
If I don't have it, how can I use it in a setAttribute ?
Sorry just a little slow
I can't do this can I ?
request.setAttribute(WebflowConstants.HTTP_SERVLET_RESPONSE,response);
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
response.addCookie(cCustSeqNumber);
response.addCookie(cPassword);
"Daniel Selman" <[email protected]> wrote:
Michael,
I found this handy snippet in our code:
// Put the httpServletResponse into the request, this is done
in
case IPs want to
// use the response to deposit cookies. The IPs maynot howeverwrite
// anything to the response as this will cause an
IllegalStateException
request.setAttribute(WebflowConstants.HTTP_SERVLET_RESPONSE,
response);
So, the HttpServletResponse is bound into the HttpServletRequest usingthe
key, WebflowConstants.HTTP_SERVLET_RESPONSE.
Magic!
Sincerely,
Daniel Selman
"michael C Ford" <[email protected]> wrote in message
news:[email protected]...
How do I get to the request object in a webflow.
I created a input process and one function it needs to do is create
a
cookie.
Problem is I don't have a response object.
How do I create/get the response object so I can create a cookie.
Thanks
Michael C Ford
------------------ Code Line ------------------------------------
public Object process(HttpServletRequest req, Object
requestContext)
throws ProcessingException
// get the pipeline and namespace info for the process
PipelineSession pSession = null;
String namespace = null;
String username = req.getRemoteUser();
pSession = getPipelineSession(req);
namespace = getCurrentNamespace(pSession);
/* ***** DO THE INITIAL CREATE OF THE BEAN *** */
try {
Properties props = new Properties();
props.put(
Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
Context ctx = new InitialContext(props);
Object homeObject = ctx.lookup("com.??.??PortalMgr");
SeechangePortalMgrHome seechangePortalMgrHome =
(SeechangePortalMgrHome) javax.rmi.PortableRemoteObject.narrow(
homeObject,
SeechangePortalMgrHome.class);
SeechangePortalMgr portalMgr = seechangePortalMgrHome.create();
/* Set the initail user */
portalMgr.setUser(username);
UserRuntime userRuntime = (UserRuntime)portalMgr.getRuntimeObject();
System.out.print("Run Time User is " + userRuntime.getUserName());
System.out.print("Run Time User is " + userRuntime.getOrgSeq());
// ** cookies for Actuate XXX=(customer sequence ID), YYY=ZZZ isa
dummy per
their requirement
Cookie cCustSeqNumber = new
Cookie("XXX",userRuntime.getOrgSeq());
Cookie cPassword = new Cookie("YYY","ZZZ");
cCustSeqNumber.setPath("/");
cPassword.setPath("/");
??response.addCookie(cCustSeqNumber);
??response.addCookie(cPassword);
} catch (Exception ee) {
System.out.print("Unable to create Portal Manager" + ee);
// at this point we add the logic to produce the bean
return "success";

How can i get a power bar code i only have a ee mobile wifi

How can i get a power bar code i only have a ee mobile wifi which doesnt allow me to sent texts .. ive tried the sim card in a unlocked phone but it wont send texts

You could try putting your SIM into an EE phone. It's only a SIM, it should be be able to send an SMS.

On Dreamweaver CC how do I get to the css rule definition box?

On the other Dreamweavers when I wanted to edit a css, I selected the css and clicked on the pencil icon to open the css rule definition box.
The only way I find to get acess to the css rule definition box on the new CC is when I am creating a new div and then there is a option for a new style and it opens the box.
My question is how do I get to the box once the rule is created? the pencil icon is not there anymore.
Not good breaking workflows Adobe, some folks have work in progress...
Please help, thanks.

Nancy O. wrote:
I can't remember the last time I used DW's CSS panels. If you know CSS, why not use code view? DW's Code Hinting is very good & it's much quicker to edit code directly in the style sheet than it is in CSS panels.
Nancy O.
That depends a bit on the situation. For example, in Netbeans I use the live connection with Chrome (embedded view or not) and I can then select an item in the live view in Chrome, which opens the css properties panes. These are quite similar to DW.
By changing the values in the css properties pane the changes in values are automatically saved in the css file, and visually updated in realtime in Chrome.
It can be very handy to quickly change the position or margin/padding/size of an element this way without having to switch back and forth to your css. Bit similar to the inspect element pane in FF and Chrome, and the changes are immediately saved.
When I still used DW I used it in the same manner for quick visual changes - and no reason to rummage through my css code.
In short, those css inspector panes can work quite efficiently when you need to polish the css code.
Granted, I would never use it while working on the main css code - but for slight and quick changes it can be a very handy feature.

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I get extract the data between two cursors on an XY graph

How can I get extract the data between two cursors on an XY graph

Well, you say xy graph, so this might be a more complicated problem.
For a waveform graph it's trivial. Simply get the two cursor indices (property: cursor index) and apply them to array subset of the data. Is that all you need?
Here's how the above code would look like. using cursor.index instead of cursor.x elimnates the need to include scaling information.
For an xy graph, there could be multiple segments (e.g. imagine a spiral that passes the desired x range multiple times from both sides). This would neeed significantly more code for a general solution.
Message Edited by altenbach on 11-24-2009 07:53 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
cursorsubset.png ‏17 KB

How do I get my autogenerated service code to update

If I add some extra columns to me database table , how do I get my autogenerated service code to update? I know how to refresh the service but that doesn't appear to update any of the stuff like this with the new columns
     // initialize property maps
        if (model_internal::dependentsOnMap == null)
            // depenents map
            model_internal::dependentsOnMap = new Object();
            model_internal::dependentsOnMap["noticeID"] = new Array();
            model_internal::dependentsOnMap["text"] = new Array();
            model_internal::dependentsOnMap["title"] = new Array();
            model_internal::dependentsOnMap["categoryID"] = new Array();
            model_internal::dependentsOnMap["createdDate"] = new Array();

Adobe, you never cease for 1 day to impress me, imagine thinking of that
really cool feature, many thanks
best wishes
Nikos
Web Developer

How do I get just the homepath?

I have this code:
$user = 'MyUser'
$getU = Get-ADUser $user -Properties homedirectory
It works but it returns a lot of data, DistinguishedName, GivenName, etc...etc.... and it returns HomeDirectory. It looks like this in the output
HomeDirectory : \\USR-FS02\MyUser$
how do I get just the \\USR-FS02\MyUser$ ???
mqh7

To get just the value of the homedirectory property of $getU:
$getU.homedirectory
or
$getU | select -ExpandProperty homedirectory
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How do I get to the iWeb code so I may add my megatags and keywords for better search visibility

Similar Messages

Maybe you are looking for