How do I get to the logic board on a PSC 2210?

I would like to swap a logic board from a known good machine to one which is having issues. How do I get it out?
This question was solved.
View Solution.

Never mind, I figured it out. Thanks.

Similar Messages

  • Hi, how do I get to the key board to start typing.

    Hi, how do I get to the key board to start typing.

    In what context are you trying to use your keyboard? On an iPad? On an iPhone? You need to give us more information.

  • How do I know if the logic board is bad?

    So the girlfriend dumped a slew of water on her 20 gig 4th gen photo. I've completely disassembled it and THOROUGHLY dried it out and all seems well from that perspective.
    So here is what is happening:
    - if I plug it into my PB it does not respond, nor does it start to charge
    - if I do a "restart" (menu + center button) with it unplugged I get the exclamation point with the battery (low battery indicator)
    - if I do a "restart" while it is plugged into the laptop, I get the lightning bolt with a battery (battery is too low to be recognized by computer)
    - if I plug it into the regular AC charger, I get the same results
    - if I try to "restart" again, the screen goes blank and then the lightening bolt comes back eventually
    I opened it up again and took a volt meter and measured that the battery is still good; I get 3.8V I think or something like that from the red and black wires of the battery. Plus this thing is only like 8 months old, so I know the battery isn't bad.
    This leads me to believe that the logic board is bad b/c that is what the battery plugs into. The screen must still be ok b/c it looks fine.
    So does anybody have any ideas?

    OK, so I have answered my own question. I ordered a logic board and put it in. So I know the logic board was bad.
    However, now I'm pretty certain the hard drive is bad too as it just spins but won't do anything. I don't even get the folder with the exclamation point- just the big apple like it is booting up.
    So I'm looking for a hard drive unless someone has a better idea???

  • How can I tell if the logic board is bad?

    My mom has a flat-panel iMac (20") that has been refusing to boot since this past weekend. My sister and I tried every trick we could come up with to get it to boot, but the only thing that resulted in anything other than a blinking question mark was powering up while holding the eject button. This caused the computer to boot up from the external firewire hard drive. We were not able to get the disc tray to open, so we couldn't start up from the Hardware Test CD. I have two questions:
    Is there a way to physically force the tray to open? (We've tried all the suggestions offered by Apple Support, to no avail, and the iMac has no hole for the old paper-clip trick.)
    Is there a way to tell whether the hard drive is dead or the logic board is bad? We strongly suspect it's one or the other.
    Flat-panel G4 iMac (20")   Mac OS X (10.3.9)  

    Hello! You have one or two problems and both are likely related. The fact that the cd/dvd drive isn't responding indicates problems with it however it could be related to the hard drive problem. The fact that it will boot from another source indicates that the logic board is ok. If you like to tinker then you might want to consider buying a new computer and using the one with problems to learn more about working on one. I've never been a fan of all-in-one type computers because when component goes out you either in for a difficult job in repairing it yourself or you forfeit the value on the component (s) that are still good. That's why I personally think towers are better long term values. Sure they're not quite as "cool" as the iMac but I'd rather pay for computing power and long term useability. Tom

  • My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

    Mj
    Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
    Regards,
    Joseph

  • How do I get the logic board serialized?

    I had the logic board replaced a year ago in my iMac. Ive been having some problems sharing maps with my other mobile devices. Someone suggested to check to see if the logic board is serialized. Anyone know how to do this?

    Go to About this Mac in the Apple menu.
    Tap the version number twice. If you see a serial number, it has been set. If not, then take it to an Apple Store or Service center and have them fix it.

  • How many times did you change the logic board?

    Hello everybody,
    I"m the formerly proud owner of an iBook G3. Solowly I"m getting tired of the logic board problem. I have AppleCare, but by now I"m sending my iBook twice a year for repair!
    By now I had my iBook sent to Care 5 times due to the logic board problem.
    Now I"d like to know if this is average, low or high ranking on the G3 exchange scale,
    Who can beat 5?
    Michael

    Michael,
    Mine has been back three times.
    If your iBook's logic board goes out again, I recommend that you call Apple and, instead of talking to Customer Support, immediately ask for Customer Relations. Be prepared with dates and details of your iBook's repair history, tell them you need a computer that is dependable, and your iBook just isn't. Then ask for a replacement. It has been known to happen.
    Good luck.

  • The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

  • I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

    I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

    Try these solutions: Error "Licensing has stopped working" | Mac OS

  • I have to get a new logic board, will this effect the memory on my 4s?

    My iPhone came back with major problems when I let someone borrow it. I went and had it looked at by a genius at the apple store, and he said the logic board was messed up or something and it was probably put through the washer. I forgot to ask a lot of questions. If I get this 'logicboard' or whatever replaced will my memory on the iPhone still be the same? Like, will all of my contacts and apps be there like before? I had very important documents on there and I had no backup. I also want to know if the apple store can do this for me. Thanks in advance.

    Thry will replace, not repair, it.

  • I have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do?

    i have been trying to get my ibook g4 fixed from apple for 6 years now. my ram doesnt work and the logic board is f'd up aswell... i know 12 people that have had the same issue. 4 of them got there ibooks replaced. anyone know what to do? all 4 ibooks were replaced outside warranty, why wont apple help me...

    Apple supports most of their computer products for a 7 year period, could be that your IBook is well past any kind of help.Secondly parts are no longer being made for this machine and never will be again. Finally I find it hard to believe that nothing has been done with this for 6 years.Have you documented the reasons why you were turned down for repairs ? were the replaced Ibooks within a couple of months of warranty expiration? What model is your IBook ? At least if we knew what the model #, some of the more techy types could find out if there were any repair programs for your model.
    Seems odd that you'd hang on to a non-working IBook for that long.

  • I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

    I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

    You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support  or  OS X: Changing or resetting an account password - Apple Support
    Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

  • Mac shuts down after boot. Is it the logic board?

    mac shuts down after boot. Doesn't go beyond gray screen with apple.  Is it the logic board?
    I do not have the start up disks to safe boot or check the hardware.
    Any ideas what the problem is or is it junk?  It is 8 years old.

      Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile Wait awhile while you harddrive
    is being checked.
        http://support.apple.com/kb/ht1455
    I'd let the machine sit for awhile in open firmware & see if it stays alive.  Do a few prints.
    Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    Restore Tiger 10.4 & Leopard 10.5  DVDs are available from Apple by calling 800-767-2775 as of January 20, 2013.
    https://discussions.apple.com/thread/4720126?tstart=0

  • Is there a way of testing the logic board via Terminal?

    About 5 days ago, my mac book pro experienced the gray screen flashing folder scenario, telling me that it can't find the OS.
    I opened in Internet Recovery mode, and when opening disk utility to check my hard drive, the hard drive didn't show.
    After a breif call to apple support, it looked like my hard drive was kapput, so I bought another hard drive (something I've wanted to upgrade for a while anyway).
    The new hard drive is a seagate momentus xt 750GB, and fairly sure it's compatible as I watched a youtube vid showing me how to replace the hard drive with the very same drive.
    The disk utility cannot find this hard drive either, which means it could be a number of things, the worst being an issue with the logic board..
    I cannot open in apple diagnostic mode, but I can access terminal without an OS, can I check the logic board, or anything else that could be causing the problem from there?
    I'm trying to find out as much as I can about the problem before I have to pay to get it diagnosed.. hopefully it just needs a replacement SATA cable!
    Thanks all,
    Joe

    Did you format the new drive?  This can be done with the Internet Recovery Mode. Try booting holding the command option R keys to get to Disk Utility.
    JRod37  wrote:
    I cannot open in apple diagnostic mode
    You can run the Apple Hardware Test / Apple Diagnostics:
    may not be aware is that Apple dumped AHT this past June. New Macs, introduced in June 2013 or later, no longer include the software. Instead, they have an entirely new diagnostic application called, appropriately enough, Apple Diagnostics. You access Diagnostics exactly the same way as you do AHT: Hold down the D key at startup.
    http://support.apple.com/kb/HT5781
    New MacBooks can access HardWareTest by rebooting holding the D key, no disk required.
    http://support.apple.com/kb/ht1509
    or older machines Boot off your Install Disk while holding down the D key, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.
    If any error codes are generated, post that code back here for interpretation.

  • Replacing the Logic Board on an iMac G4 (flat panel)

    Hi all
    A friend of mine has a G4 Flat Panel iMac, and apparently, though I've not seen it for myself yet, her Logic Board died on her. She has since bought an iMac G5. But I've been trying to find where one can get a replacement logic board from, that isn't going to break the bank. I've found nothing so far. Are these available anywhere? And will they be so expensive as to make it not worth the bother? And of course I have not found any technical data about how you open and replace components in one of these iMacs. Apple don't post them since they are supposed to be tampered with only by Apple certified technicians.
    Thanks.

    Hello,
    Apple doesn't typically make their repair components available to the end-user. So, it's a bit harder to find a replacement logic-board for one of their computers.
    The service centers can get them, but it's not going to be cheap.
    Typically, you can expect to pay $500 to $800 for a replacement logic-board from Apple.
    And, the service center is only going to sell it to you if you let them install it.
    But, you can sometimes find places that sell them.
    This place used to sell lots of Apple logic-boards, case parts, brackets, keyboards, etc. But, they stopped for some reason. But, you might call and see if they have what you need in a warehouse somewhere:
    http://cgnusa.com/scripts/default.asp
    And, this place does sell some parts for the Do-It-Youself person. But, they typically require you to send in your system for a new logic-board. But, you might be able to get a price from them:
    http://www.dttservice.com/index.html
    In all honesty, if you are looking for a part you can install yourself, and don't want to pay $500 or more, then you are probably better-off trying to find a used part.
    If you can find one who's screen died, but the logic-board is still good on, then you may be able to work out a deal. I hate to recommend them, but e-bay is probably your best chance for a used replacement logic-board. Just don't pay too much.
    Whatever route you / they choose, keep in-mind the price of a low-end Mac Mini. Don't spend more to repair an old system than you would spend to buy a current low-end system.
    I hope this helps.

Maybe you are looking for

  • What's the best MacBook for basic graphic editing?

    Hi there, I've been saving up to finally get a MacBook after having a pro during university (stupidly it got soaked in my bag during a thunderstorm and didn't have any insurance on it). However, I'm trying to save as much money as I can so can't affo

  • Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

    Hi people, Here's my Exchange Server 2007 SP3 in the ideal and normal situation: Mailbox Server (CCR – Stretched Cluster) Nodes PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53 DREXMBX01-VM (Passive mailbox) – 192.168.1.88 Hub Transport and Client

  • ABAP Buffer Problem - URGENT

    Hi All I have the following ABAP problem. I wrote a program that delimits(Just editing the end date) the Qualification and Person relationship in HRP1001. The problem is that I update the database directly, and all appears to be working fine but it a

  • Sync two database

    I am beginner in sql Database and I don't know where and how i search for my question. I have two computer (a laptop and a PC). i work with database somtimes in laptop E& somtimes in PC I need a solution to make Synchronization the two database to me

  • Signal Level for 2wire

    The signal level on my wireless network connection does not work when I go to one specific room in my house - it works upstairs, but not 50 feet away. The signal is either very low or does not work at all in just the one room. I am using a 2wire home