How do I get total message count back?
I used to be able to see my total message count next to the inbox (not only unread mes) How do I get it back? If it is an add-on, does anybody know what it is called?
I think this add on is what you are looking for.
https://addons.mozilla.org/en-US/thunderbird/addon/extra-folder-columns/?src=ss
Similar Messages
-
How do i get my message log back after updating to 7.0.3?
how do i get my message log back after updating to 7.0.3?
finally figured out how to pull backup from computer vice cloud - iCloud lost the messages.
-
How do I get my data counter back on my home page
How do I get my widget for data counter on my home screen
Depending on the phone you have, the widget will either be in the widgets section of your app drawer, or you'll long-press an empty space on your home screen and then see the widgets folder at the bottom of the screen. Once you're in the widgets folder, find the widget, long-press it, and drag it to where you want it on the home screen, then let go.
-
ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)
At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.
-
I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?
FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al -
When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?
http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
I have a i-phone 5s which i got recently. Everytime i try to update my apps that i got on my 4s on the new5s i get message to fill in a password for some unknown gmail id. How do I get my apple id back for my apps?
That means that one or more of these apps was obtained using that ID. All apps are forever tied to the ID used to originally obtain them & they cannot be transferred to another ID. Your only option is to delete this content, then re-purchase using your ID.
-
There used to be a preview window in mail where you could read the message in the mail box but now its gone. It just shows me who its from and the date. I now have to click on the message twice to get it to display. How do I get the preview box back?
There is a bug in Mail triggered by receiving a password-protected PDF as an attachment. According to reports, the bug is fixed in OS X 10.8.5.
-
How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????
Hello, what OSX version?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
MDX How to get total distict count and SUM of subgroups?
with
MEMBER Measures.[EmailCount] as IIF(ISEMPTY([Measures].[Tran Count]), 0 ,[Measures].[Tran Count])
MEMBER Measures.AdvGroupTotal as
SUM (
FILTER( EXISTING ([Dim IFA Details].[Parent Key].[Adviser Group].Members * [Dim Date].[Fiscal].[Fiscal Year].members )
, Measures.[Amount] > 100 )
, Measures.[Amount])
MEMBER Measures.[AdvGrpCount] as
distinctCOUNT(Existing([Dim IFA Details].[Parent Key].[Adviser Group].Members * [Dim Date].[Fiscal].[Fiscal Year].members))
member Measures.IncomePerEmail as Measures.AdvGroupTotal /Measures.[EmailCount]
member Measures.AvgIncomePerFirm as Measures.AdvGroupTotal/ Measures.AdvGrpCount
SELECT { [Measures].[Amount] , Measures.[EmailCount], Measures.AdvGroupTotal, Measures.[AdvGrpCount],
Measures.IncomePerEmail, Measures.AvgIncomePerFirm }
ON COLUMNS,
[Dim Date].[Fiscal Year].[Fiscal Year].ALLMEMBERS * [Dim Date].[Fiscal Quarter].[Fiscal Quarter].ALLMEMBERS *
Except( [Dim Income Range].[Hierarchy].[Range ID].Members , [Dim Income Range].[Hierarchy].[All].UNKNOWNMEMBER.UNKNOWNMEMBER )
on rows
FROM [Income and Emails Cube]
where
[Dim Date].[Fiscal].[Fiscal Year].&[FY 13/14]
The query above returns :
How can I get Totals for AdvGroupTotal and AdvGroupCount for the year ?
In the above case I want to tally up 1586 + 67 + 155 + 12 + 1718 for AdvGroupCount, same applies for the corresponding
AdvGroupTotal figures.
Seems simple enough, but I seem unable to come up with a way around this.
JonI worked it out with the help of Simon from another forum.
Using a filtered set will get me the result required. It is however not very quick, so I probably should look into building it into the cube.
WITH SET [Filtered Groups] AS
( Filter (
{ [Dim IFA Details].[Parent Key].[Adviser Group] } *
{ [Dim Date].[Fiscal Year].CurrentMember },
[Measures].[Amount] > 100
MEMBER [Measures].[Annual] AS
Sum ( [Filtered Groups], Measures.[Amount] )
MEMBER [Measures].[Firm Count] AS
DistinctCount ( [Filtered Groups] )
MEMBER [Measures].[Avg Income Per Firm] AS
[Measures].[Annual] / [Measures].[Firm Count]
MEMBER [Measures].[Test] AS
Sum (
{ [Dim Date].[Fiscal Quarter].[Fiscal Quarter] } * { [Dim Income Range].[Hierarchy].[Range ID] } * { [Filtered Groups] },
[Measures].[Amount]
MEMBER [Measures].[TotalCount] AS
DistinctCount (
{ [Dim Income Range].[Hierarchy].[Range ID] } * { [Filtered Groups] }
MEMBER [Measures].[TotalAvg] as [Measures].[Test]/ [Measures].[TotalCount]
MEMBER [Measures].[Quarter] as [Measures].[Amount]
SELECT
{ [Measures].[Quarter], [Measures].[Annual], [Measures].[Firm Count], [Measures].[Avg Income Per Firm],
[Measures].[Test], [Measures].[TotalCount], [Measures].[TotalAvg] } ON COLUMNS,
[Dim Date].[Fiscal Year].[Fiscal Year].AllMembers * [Dim Date].[Fiscal Quarter].[Fiscal Quarter].AllMembers *
Except ( [Dim Income Range].[Hierarchy].[Range ID].Members, [Dim Income Range].[Hierarchy].[All].UnknownMember.UnknownMember )
DIMENSION PROPERTIES Member_Unique_Name, MEMBER_CAPTION
ON ROWS
FROM [Income and Emails Cube]
WHERE [Dim Date].[Fiscal].[Fiscal Year].&[FY 13/14] -
All the my messages from my phone inbox disappeared.Why did it happen and how should i get the messages back?please help
Is the MacBook the computer you have synced with in the past? If not you can use the computer that you have synced with to restore your apps. Are you sure you are using the same Apple ID that you used to purchase the Apps?
-
Before installing 4.0.1 I could right click on the Firefox icon on my computer's taskbar and hit close window. It would then give me the option to "save tabs and quit" or "close all tabs."
Now it just alerts me that I'll be closing multiple tabs.
It was convenient to be able to close Firefox and open it with all of the tabs in place. There is nothing more irritating than having multiple tabs lost because your computer did an update overnight and restarted. Also it was helpful when you wanted to run a tun-up or cleaner that asked you close out of your browser for optimum result's.
How do I get "save and quit" back?
ThanksFirefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
HOW DO I GET THE OLDER BROWSER BACK???
ORIGINAL REVISED QUESTION =
AFTER ALL THAT ~ going through the whole MESS you have created and YOU TELLING ME that "in order to have a chance of getting my question answered ~ to give you ALL THE DETAILS I CAN", you REFUSE to accept is by saying, "Please keep the length of your question to 255 characters or less ..."!!! Are you INCAPABLE of saying that BEFORE I go through all the other MESS??? HOW DO I GET THE OLDER BROWSER BACK???
ORIGINAL QUESTION = I had SEVERAL plugins that WORKED!!! Then, I "upgraded" {as you, LAUGHINGLY, claim} to your Firefox 4 version after being promised by you that it's BETTER and, supposedly, an IMPROVEMENT over the older version. After I installed the NEW one ~ IT TURNED OFF ALL MY PREVIOUS PLUGINS!!! Your WISHTHEYWUZ "PROGRAMMERS", very cleverly {and, actually, HATEFULLY} ummmm, kinda "forgot" to make the new browser BACKWARD-COMPATIBLE so that it didn't DESTROY everything we, already, had ~ that WORKED before YOU got hold of it!!! So, now, *HOW* do I get the OLDER version back??? I think you should KNOW what you can do with this newer "UPGRADE" that is, actually, a LIE!!! UPGRADES do NOT take you in REVERSE ~ making things WORSE ~ real upgrades make things BETTER!!! DUH-H-H-H!!!
ORIGINAL DETAILS =
I, recently, purchased a new HP 4500 Printer and it came with a video-capture extension/plugin. Attempting to use it, the program informed me that I needed to be using, either, an EI or a Firefox Browser mentioning version 1.5 {I think it was} or later. The Firefox browser I was using was 3.something; so, everything was going along FINE. When I installed the video capture program, it added the plugin to the browser ~ PERFECTLY!!! I, also, had MANY other plugins that worked and that I used somewhat regularly!!! NOT ANY MORE!!! YOU and your TOTALLY INEPT, WISHTHEYWUZ "PROGRAMMERS" have STOLEN nearly HALF of my COMPUTER!!! I can, no longer, USE ANY OF THOSE PLUGINS, simply, because YOU "forgot" {let's say} to INCLUDE them in your new browser version 4. WHAT WAS WRONG WITH THEM??? WHY DIDN'T *YOU* WANT ME TO BE ABLE TO USE THEM, ANY LONGER???
Apparently, YOU think that the computer world revolves around YOU and that YOU are its AXIS!!! You feel that YOU have NO RESPONSIBILITY to make YOUR programs in any way compatible with what is, already, available ~ according to the "advice" I noticed on one of YOUR pages WHILE REACHING THIS ONE, you said that everybody else must accommodate YOUR claimed "improvements" that do nothing but DESTROY!!!
All I want is for YOU to, either, MAKE YOUR VERSION 4 COMPATIBLE; or, advise me on HOW to get the EARLIER version back that *IS* compatible. Otherwise, I'll switch to a different browser and advise all others over whom I have any influence to do the same for the sake of their overall computering enjoyment!!!
PLEASE ADVISE!!!
I see that you have provided {below this window} a space for, likely, a SINGLE Extension / Plugin. Therefore, a PARTIAL LIST follows ~
ArcSoft Video Downloader Extension 2.0.0.8
Copy to Wordperfect Lightning 1.0
Google Photos Screensaver 2.0
HP Smart Web Printing 4.5
iWinGames Plugin 1.5
Microsoft.NET Framework Assistant 1.2.1
RAW Thumbnail Viewer 2.0.0.11
Real Player Browser Record Plugin 1.1.3
TVU Web Player 2.5.3.1
Yahoo! Toolbar 2.1.3.20100310105313THANK YOU, TREMENDOUSLY, for the responsive information!!! Although, the WISHTHEYWUZ "programmers" and those that are, actually, controlling and "in charge" of this website ~ you know who I mean ~ those that are so SUPERB at, ONLY, "PASSING THE BUCK" in order to get the regular USERS to answer the questions directed at THEM {as mine was}!!! In that way, of course, they EVADE countless issues and what would be EXTREME PANGS OF GUILT to anyone that "stood responsible" for their actions!!! Regardless, even though, "THEY" continued to lay the blame for the SHODDINESS & EXTREME INEPTNESS OF *THEIR* PROGRAMMING ATTEMPTS onto others ~ the links that *YOU* were kind enough to share with me *DID*, in fact, get my older ~ MUCH MORE USABLE browser back!!! Of course, NOW, the shoddy WISHTHEYWUZ "PROGRAMMERS" have rigged everything so that I will be HOUNDED and HARASSED in order to try to FORCE the crappy version 4 back onto me!!! I, still, wanna provide YOU with all the ACCOLADES possible!!! Your desire to attempt to HELP OTHERS is, truly, a remarkable characteristic in today's world of SELFISHNESS and UNGODLY attitude problems!!!
-
After syncing my phone my emails all showed up as unread. Even after reading them again! I still get the # of total emails in the red oval beside the envelope app picture. It used to only show the number of NEW emails. How do I get it to go back to that?? HELP!
Is there a setting in about:config that controls the length of the alltabs list? I would look for such a thing, and change the setting if it is there. A setting of -1 should make it limitless.
-
Help! How do I get all my mail back?
Basically I just went through **** in a handbasket, trying to transfer my email accounts from one webhost to another -- from Globat to GoDaddy, if the names can help.
Well, I'm still waiting for my accounts to come online -- but I've discovered something truly disturbing: I eliminated the accounts from my Mail program, in order to enter all the new server info -- POP info, new passwords etc.
But now I find that with the elimination of the old accounts, also went everything in their inbox/outboxes! That means I somehow just lost about 1,000 emails that I have received for two accounts, and also the ones that I sent from those two accounts! They just don't exist any more, so that means I've lost all my correspondences, email addreses -- everything for at least the past year.
HOWEVER, I did a backup onto my Time Capsule of this whole computer (MacBook Pro mid 2012) about 6 days ago, and when I go into Time Capsule, there they are -- all those messages, in both my inboxes and outboxes.
However, when I click "Restore," it says "Restoring 987 messages" in my present inbox, but then when it's finished so-called "restoring" them, the inboxes are the same as they were before -- empty.
Now all those messages are on my Time Capsule -- yet when I'm IN Time Machine it won't let me do anything with the messages. Yet it also will not restore them to my present inboxes.
They exist -- on the Time Capsule. But how do I either get them back into my Mail program of now, or somehow save all of them another way in a form that at least will preserve their contents, plus all the addresses etc. etc.?
I don't know how to download them from my old webhost's server, and even if I could, those messages only go back a couple of months and are mixed up with a ton of junk mail. Very soon, my old webhost (Globat) is going to be terminating my account, so they won't exist on Globat's servers either.
How do I get those messages from my Time Capsule to my laptop? I don't mind if they're just one long text file -- I just need them for all the email addresses they contain, and there are some that have personal significance as well. Isn' there a way I can import them all into a new folder in Mail, called, maybe, "Old emails" or something like that?
Help! I didn't even consider this when I went to change webhosts . . .Okay, here is the deal:
1) I open the "Mail/inbox" for my mail account. Since all the emails aren't there any more, I now click on "Enter Time Machine."
2) Now I select the last date that I backed up my Mac.
3) All the emails that WERE in my inbox on that date show up in Time Machine.
4) I click on "Restore."
5) It says "Restoring 987 files" (all the emails that WERE in my inbox on Dec.6th and which I want to get back)
6) My present day inbox reappears and none of the "Restored" emails are there.
Question: at which point do I Control-click on all the emails? While they are showing in my Time Machine inbox? (That does not work -- nothing I do does anything -- I just get the error alert sound).
7) when I click on "Restore" it again says "Restoring 987 files," I am back in my present-day inbox and nothing has been restored.
So exactly at which point to I control-click? Do I select all my previous inbox items while in Time Machine and control click? If I do that, nothing happens at all. And if I move back out of Time Machine, nothing has been restored. -
I have had itunes library to go away and itunes create a new one. how do I get my old one back?
I have had itunes library to go away and itunes create a new one. how do I get my old one back?
Hello,
Did you delete the library ?
If no, press the Option/alt key when you open iTunes and you should see a message and be able to choose a library.
Maybe you are looking for
-
DW CS5 -- Issues with uploading files to server
Hi everyone -- I recently took over control of a website that hasn't been updated in years. I am in charge of redesigning the site, but need to keep what we have up-to-date until the new site is ready to roll out. I received the FTP info for the serv
-
Since 'camera roll' has been replaced with 'recently added' on my iPhone, I can no longer distinguish between pictures I've taken on my iPhone and pictures that are being displayed from my iMac's iPhoto. I don't want my new iPhoto pictures automatic
-
Purchase Order Release Strategies for Changed Amount
Hi Gurus, We have a unique request from the business to set the release strategies for POs based on the Still to Deliver amount, not the Net Total Amount of the PO. Example: Configuration is PO total amount <$5K requires only L1 approval. PO total a
-
Hi, i'm having a bit of a mind blank here and am looking for some help. In my 'College' class i have to delete a student from a course by using there student number as parameter. First i am checking to see if the student is already in the list. I hav
-
Hi I hv to develop a report for the import PO,which shd display the import PO released on the date entered in selection screen.Also the Order amount like(usd,eru) shd be displayed along wid the Order amt in INR for comprasion.wr Selection-screen - 1