How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered.  Then "Share" to a computer file. Pick a file type that suits your needs.  Be sure to check the box titled "Share WorkArea Bar Only".  Unfortunately, the clip piece will be re-encoded.  PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using.  The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips.  Some sort of magic is in them where re-encoding does not take place.  The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers.  Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • How do I get video clips from Windows 8 to mini ipad

    How do I get video clips from Windows 8 to mini ipad

    You can use a 3rd party app like Photo Transfer App.
    https://itunes.apple.com/sg/app/photo-transfer-app/id365152940?mt=8

  • How to insert a video clip into a timeline ?

    Premier Pro CS7 how do I insert a video clip into the time line ?

    Hi Chris Micha,
    Welcome to the forums.
    Please import the clip in the project panel, right click on the clip and select new sequence from clip option, you can also drag the clip to new item icon at the bottom of the project panel to create a sequence.
    Regards,
    Vinay

  • How do i put Video clips into Imovie, Without Iphoto?

    Im using Imovie for a school project, and i need to put video clips into it. But for some reason my mac doesnt have Iphoto, and i've read online that the only way to do this, is through Iphoto??? Does anybody know otherwise?? please help!!

    If you have a supported camcorder or camera you should be able to import your video directly to imovie from the camera. If the video is already on you computer, select the imovie File menu, then select import to library and navigate to the movie files you want to import. The article below should help you
    http://support.apple.com/kb/PH2114

  • How to split a video clip into two separate clips?

    Whenever i enter the key word to search for split, it always shows me how to do split edit, or split screen. I do not want that. I just need to know, how to cut a video/audio clip into two pieces, so that I can cut one of them out of the time line....
    Could somebody help....
    Thanks

    I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
    Wow.
    There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
    You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

  • How do I get video clips to play on my iMac account? My wife doesn't have this problem on her iMac account.

    When I try to download and play a video clip at a web site or from an attachment to an email, I get either a blank space or a message telling me to download and install Abobr Flash Player. I already have the latest Flash Player. And when I try the same video clip on my wife's iMac account, the video clip plays perfectly.

    I found the solution to my problem, so now I can play video clips at web sites & attachments to email. The solution was:  "Safari → Preference → Security → check box "Enable plug-in". I got a hint from Troubleshooting on the Yahoo.com web site. Thanks everyone.

  • How can I get video clips dated 12/29/10 and later do not show in view screen. (iMac 2.8 GHz Intel Core 2 Duo w/OSX 10.6.8)

    Pre 12/29/10 clips show fine in viewer window but anything more recent does not. Consequently, I don't have any way to work with them. I'm still on iMovie '08. Would upgrading to '11 help? My video clips were entered into iPhoto from a Canon still camera with the ability to take one minute video. The video format is labeled MVI (#) AVI in iPhoto. None of the video clips  run in iPhoto but they all run on my 1st generation iPad!
    Can anyone help me with this problem? I'd like to do a movie of my grandson as well as our new puppy.
    Thanks, Ruth Sumner

    You are only running on 2GB of RAM. IMHO 4GB woud be the minimum to realistically run Mavericks on, although the more the better.
    Pete

  • How to pull video clip into Shake from final cut?

    When I right click there is no send to that comes up. How do I get this to work?

    Did you highlight all the clips involved first? Do you have FCP 5.0 or higher?
    Shane

  • How do I get Raw files into Organizer?

    I have a Nikon D300. I have 15,000 in Organizer and would now like to experiment in RAW, but Organizer will not accept them. Any way around this?
    Thank you,
    Ian Julian
    www.natureandpictures.com

    Thank you for that. I have downloaded the ACR (whatever that stands for) and have an icon. What do I do now to get it into Organizer? I remain unable to download my RAW files.
    Thank you,
    Ian Julian
    www.natureandpictures.com

  • How can I get video clips to play in a browser?

    Scenario:  A client visits my Web site.  A shockwave movie plays automatically.  It contains a video clip.  When the SW movie encounters the frame containing the movie clip, it simply skips over it and continues.  The video never plays.  I have tried avi, windows media, mpeg and quicktime with the same results.
    I have found that the video plays fine as long as I open the director movie with Director.  But when I open it with a browser, the video clip does not play.  I have tried Internet Explorer and Firefox browsers.
    Does someone know what I am missing to make the video play in a browswer?
    Thanks.
    Dewey

    When the SW movie encounters the frame containing the movie clip, it simply skips over it and continues.  The video never plays.
    Presumably you have code to stop the playhead from moving while the video plays? You might want to post it.
    If you are testing this locally, you need a folder named "dswmedia" somewhere in the path or linked content, like your video file, won't be found. Check the docs for more details.

  • HT201302 how do I get video I have taken from a camcorder and edited in my PC to upload to my ipad?

    I need to get music videos I have made from my pc to my ipad.  any suggestions?

    Import them into iTunes, and sync them through there.
    Yoiu may need to convert them to a playable format for the iPad. If its a video format itunes support, you ncan make playable versions for iPad from within iPad.
    Alternatively if you find a Video App such as Moli Player you can import them into the App through iTunes File sharing as well without having to change their format. Moli player is capable of playing many types of videos and audio formats.
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    iOS: About File Sharing
    http://support.apple.com/kb/ht4094

  • How do I get video clips out of menu button?

    iMovie 9.0.8  iDVD 7.1.2
    I have a 90 minute video with 11 chapters.  I found in "edit" menus something called populate drop zones" and clicked it for main page and two sub menu pages.  When trying to burn,  I got the error message "- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project."
    Fine, I'll take out the damned videos out of the menus....BUT HOW?  There seems to be no way to "unpopulate drop zones"  I tried dragging a photo into the menu buttons without success.
    I shouldn't have to start over and wait another hour for iDVD to read my iMovie project every time there is some change to make to drop zone content.

    Sounds like Revolution and there's only one dropzone in the top menu.  Type Command + i to bring up the info window for that menu.  The dropzone will be the one in the middle:
    It'll be the same for the submenus.
    iDVD allows up to 15 minutes of playing time in motion menus.  If you're referring to the buttons for the individual chapters you can change the button type to just text.  Or if the video in the drop zone is longer than 15 minutes just add a still photo to the drop zone instead of a movie.
    You can get an idea of  the total menu playing time in the Project Info window:

  • Can not import video clips into iMovie from Photos

    I have some clips that I copied from my GoPro to my iPad via the Apple Camera Connection Kit.  When I open iMovie there are icons for the clips but iMovie will not import them.  The format is H.264.  Is there a way of tricking iMovie?

    Here is the problem, Im making a movie, I took all the video on my Kodak V610 Camera. I have the clips in .mov format. The clips are stored on an external disk in my iPhoto library.
    Your digital camera probably uses MPEG-4 video (compatible with iMovie '08 in combination with µ-Law 2:1 compressed audio (which is not iMovie '08 compatible). While using the MPEG Streamclip MPEG-4 conversion will work, the prefered methof would be to use the QT "Movie to MPEG-4" option in QT Pro (quicker if you have it) or GarageBand (via the "Expert Settings option) to "pass through" you video while converting the audio to AAC (MPEG-4 audio). A mono setting of 64 Kbps with a 44.1 KHz sampling rate is a bit of "overkill" with respect to the original audio but will be quality compatible with what iMovie uses for its output presets.

  • How to combine video clips into one video clip using FCPX

    I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
    Gar

    The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
    But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

  • How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    How do I insert additional clips into my video timeline in Elements 13?  When clicking 'add media' it added the clips at end of video rather than in their appropriate position.  Could not 'cut and paste'.

    bhsleadership
    I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
    For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
    1. Are you working from the 8.0/8.0.1 Update of the program?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
    2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
    For Background Rendering option. See Edit Menu/Preferences/General.
    For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
    Is your computer optimized in spite of the fact that  you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
    Looking at the properties of your source media, I see:
    video compression = MPEG1
    audio compression = MPEG-Layer1 (.mp2)
    Frame Size = 640 x 480 (4:3)
    Pixel Aspect Ratio = 1.0
    Frame Rate = 30 progressive frames per second
    With properties like those you are sure to get a red line over that content since there is no project preset with that description.
    But, your choice of the default NTSC DV Standard would have been mine also.
    I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
    To be continued.
    ATR

Maybe you are looking for