How do I get Video_TS.BUP, Video_TS IFO, Video_VOB files from A DVD into my Final Cut Po on mac.

Hi I have had VHS videos put onto DVDs but several videos are on one dvd. I am trying to separate them and put them on their own DVD.
There are Video_TS.BUP, Video_TS IFO, Video_VOB files. I have a prism converter so I converted the files to MP4 thinking I could then copy them into Final Cut Pro to edit etc but Final cut pro comes back with error message "File Error: Unknown file"
I tried converting to .mov but same message. Can any one help please.
Louise

Actually, if you're not doing any editing beyond separating the different films and are willing to dive into a slightly deeper end of the pool, you can use mpeg streamclip to "demux" the dvds into m2v (video) and ac3 (audio) files and bring these files into dvdsp and set start and ends for each section to make individual dvds.  This will allow you to repurpose the material without any loss in quality.  If you convert the material from the dvd into quicktimes suitable for editing in fcp and then recompress them for authoring back to dvd, you will have some quality loss.  Whether the loss is enough to worry you, you'll have to decide for yourself. 
If you want any further help with this workflow, post back.

Similar Messages

  • How can I get Elements 12 to load raw files from my Nikon D5300. I have installed DNG Conv. 8.7.1

    I cannot get Elements 12 to recognise and load NEF files from my Nikon D5300. I have downloaded and installed the latest DNG coverter software 8.7.1 but Elements still refuses to load any NEF files.
    regards Ian.

    Hi,
    You shouldn't need to use the DNG converter unless you are using the MAC app version. The D5300 should be supported by Camera Raw 8.3 which should be compatible with Photoshop Elements 12.
    In the editor go to Help -> About Plug-in -> Camera Raw to see which version you have loaded. The latest for Photoshop Elements 12 is 8.5. If you have an older one then go to the Help menu and select Updates.
    If you are up to date, then you may have use old Nikon software to access the NEF files and that is known to corrupt them so that Photoshop Elements can't read them.
    Brian

  • How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

    How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
    I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
    Simply exporting from Premiere back to final cut is also very complicated.
    Thanks for any ideas.

    First, copy the card to a hard drive connected to your fcp workstation.  I always back up all card based media at least 2 or three times.  All hard drive will eventually fail.  It's a question of when, not if.
    I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files.  You can try importing these directly into fcp.
    If you don't, you can try something like clipwrap
    http://www.divergentmedia.com/clipwrap
    or
    Magic Bullet Grinder
    http://www.redgiantsoftware.com/
    But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy.  HDV is a problematic format.  Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

  • How can I get an unsigned char string with nulls from a dll into LabVIEW 6i?

    The following ethernet packet data is contained in an unsigned char * string returned from my dll (it's formatted on printing):
    Received A 230 Packet On Adapter 0x008F0070
    Ethernet Dest: 01.E0.BB.00.00.15 Src: 00.E0.BB.00.DD.CC Type: 0x8868
    000000: 01 E0 BB 00 00 15 00 E0 : BB 00 DD CC 88 68 48 41 .............hHA
    000010: 00 E0 BB 00 DD CC 80 B3 : 00 00 FF FF 00 02 00 01 ................
    000020: 01 00 F0 18 FF 7F 7F FF : FF 7F 7F FF FF 7F 7F FF ................etc., etc.
    However, when I read this string into LabVIEW 6i, I only get the following:
    01E0 BB
    Which is the data before the first NULL or 00 information. I found a "Remove Unprintable Chars.vi" but it
    just sees more data before the above string, nothing after, as seen here: 5C30 31E0 BB.
    Anybody have any suggestions for how to get the rest of the string? Is there something I can do to further reformat my dll? The dll I'm using is already a wrapper around another dll so I have some flexibility, but the bottom line is, the data I want is in the format of an unsigned char *.

    Excellent advice, this mostly works so I have some further questions:
    I am just reading network traffic off my ethernet card right now, but here is what I get using my C program to test:
    000000: 01 E0 BB 00 00 15 00 E0 : BB 00 DD CC 88 68 48 41 .............hHA
    000010: 00 E0 BB 00 DD CC 80 B3 : 00 00 FF FF 00 02 00 01 ................
    000020: 01 00 38 3C FF 7F 7F 7F : 7F 7F 7F FF FF 7F 7F FF ..8<............
    000030: FF 7F 7F FF FF 7F 7F FF : 7F 7F 7F FF FF FF FF FE ................
    000040: FE FF FF FF FF 7F 7F 7F : 7F 7E 7E 7F 7F 7E 7E FF .........~~..~~.
    000050: 7F 7F 7F 7F FF 7F 7F 7F : 7F 7F 7F FF FF 7F 7E 7F ..............~.
    000060: 7F 7F 7E 7F 7F 7E 7F FF : FF 7F FF FF FE FF FF FE ..~..~..........
    000070: FF FF FF FF FF 7F 7F FF : FF 7F 7F FF FF FF FF FF ................
    000080: FF 7F 7F FF FF 7F 7F FF : FF 7F 7F FF FF 7F 7F FF ................
    000090: FF 7F 7F 7F FF 7F 7F 7F : 7F 7F 7F FF FF 7F 7F FF ................
    0000A0: FF 7F 7F 7F 7F 7E 7E 7F : 7F 7F FF FF FF FF FF FF .....~~.........
    0000B0: FF FF 7F FF FF 7F 7F FF : 7F 7F 7F FF FF 7E 7F FF .............~..
    0000C0: FF FF 7F FF FF 7F 7F FF : 7F 7F 7F FF FF 7F 7F FF ................
    0000D0: FF 7F 7F FF FF 7F 7F 7F : 7F 7F 7F FF FF FF FF FE ................
    0000E0: FE FF FF FF 00 01 : ................
    And here is what I get using LabVIEW to call the dll:
    0015 00E0 BB00 DDCC 8868 4841 00E0 BB00 DDCC 80B3 0000 FFFF 0002 0001 0100 9600 7F7F 7F7E 7F7F 7F7F 7F7F 7F7F 7F7F 7F00 B405 4300 3300 0000 0000 0000 01E0 BB00 0015 00E0 BB00 DDCC 8868 4841 00E0 BB00 DDCC 80B3 0000 FFFF 0002 0001 0100 9600 7F7F 7F7E 7F7F 7F7F 7F7F 7F7F 7F7F 7F00 F405 1B04 0C04 0000 0000 0000 8000 0000 0000 0000 0800 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
    The first thing I notice is that the first 4 bytes are chopped off, and after about 50 bytes, the data is corrupted until the sequence starts to repeat, but this time it starts with the missing 4 bytes and still corrupts after about 55 bytes.
    I am expecting the data in LabVIEW to look very similar to the C data because the network packets I am grabbing are pretty consistant, only a couple bytes will vary between them, not the number I am seeing in LabVIEW.
    Another side effect I'm seeing is that I can only run my labVIEW code once, if I try running it again it crashes with failures such as:
    memory could not be "read"
    For reference, I am opening and closing the network adapter inside the read function of my dll, but the pointer seems like it should be intact...
    Attachments:
    zListAdapters.vi ‏30 KB
    listAdapters.dll ‏201 KB
    Reading.dll ‏213 KB

  • How can i get the address with drag and drop from address book into pages?

    I want to creat a letter withe the new pages. Normaly it was possible to put the adress from the adressbook with drag and drop into the letter. So it was possible to create one letter with many different adresses. But now I didn't find this function any more. How to do ist now?
    Withe best regards and I'm sorry for may bad english
    Klaus

    Sounds like you "upgraded" to Pages 5.
    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • How can I get Elements 13 to read RAW files from Nikon D750?

    I've upgrade my camera from the Nikon D3200 to the Nikon D750. With the D3200, I used Elements 11 to edit both JPEG and RAW files, but found out today Elements 11 isn't compatible with the D750 to read RAW files. I downloaded the trial version of Elements 13--which is compatible per the Adobe help desk, but the RAW files shot with the D750 still aren't being seen; however, I do see RAW files that I took with the D3200.
    Same memory card is being used and I formatted the card when I changed it from one camera to the other.
    What am I doing wrong? I almost always shoot RAW, so I need to be able to the files.
    I'm wondering if Elements 13 really is compatible with the D750.
    I want to add I'm using a MAC.
    Thank you!
    Shannon

    I was able to figure out the issue--the D750 files must be converted to DNG files first, then I can upload them to Elements and edit them as I would a RAW file.
    If anyone else is having this issue, I found the video helpful: Learning | LR/PS - The Advantages of the DNG File Format | Photoshop.com.
    You can find the free DNG converter here: Photoshop Help | Digital Negative (DNG)
    This works for both MAC and Windows.

  • How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

    Settings -> Mail -> Signature and edit it to whatever you'd like.

  • I just got a new macbook pro. How do I get the 900  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

    I just got a new macbook pro. How do I get the 900+  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • How do I get games and music on my phone from iTunes

    How do I get games and music on my phone from iTunes

    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

    How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
    So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist.  That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

    Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

  • How do I get back to my basic start page from any ...

    How do I get back to my basic start page from any other page? There should be a one click link but I can't see how to do it. Apologies for illiteracy. Like say from this help page, how can I get back on skype and make a call?

    There is a "Home" button below search option which will take you to the main page.

  • How do I get Calendar to suggest name and address from Contacts on my iPhone 5 in iOS 8?

    How do I get Calendar to suggest name and address from Contacts on my iPhone 5 in iOS 8?

    Restore it from your backup.

  • How do I get my wife's photos and video from her iCloud to my iPad?

    How do I get my wife's photos and video from her iCloud to my iPad. She no longer has an iDevice and I want to retrieve some really sentimental photos and videos of my grandson. I've logged on to her iCloud account on my iPad, but don't know what to do next.
    Thanks
    Tony

    Her camera roll photos and videos would be included in her backup.  Restoring her backup to the iPad should recover them.
    Start by creating a current backup of your iPad that you can restore your data from later.  It's faster if you do this on your computer using iTunes; if you can't, create a backup in your iCloud account.  If you can back up to your computer, do this by connecting the iPad to your computer, opening iTunes and going to File>Devices>Back Up.  Then go to File>Devices>Transfer Purchases.
    Then erase the iPad and restore her iCloud backup as explained here: https://support.apple.com/kb/ph12521.  When it's done, import the recovered photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083.
    Then erase the iPad again and restore the backup you made earlier, either from iTunes or from iCloud depending on where you backed it up.
    If you want the photos back on the iPad, put them in a folder and sync them to your iPad by selecting the folder on the Photos tab of your iTunes sync settings and syncing.  If you want to videos back on your iPad, import them to your iTunes library (File>Add to Library), then sync them to your iPad from the Movies tab of your iTunes sync settings.  You will then find them in the Home Movies section of the Videos app on your iPad.  Just so you are aware, photos that you sync to your iPad can only be removed later by syncing them off your iPad (by deselecting the folder on the Photos tab and syncing again).  They can't be deleted on the iPad itself.

  • My hard drive failed so I sent it off to get recovered. How can I get my music back that I purchased from my old iTunes account?

    My hard drive failed so I sent it off to get recovered. How can I get my music back that I purchased from my old iTunes account?

    See Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for