How do I get Windows 8 to read the .7z file that downloads with the Photoshop Elements 12 installer?
I just downloaded Photoshop Elements 12 and it downloaded just fine, but when I tried to install it, I keep getting a message that says "The file archive part of adobe is missing" but they're both on the same folder and it seems that Windows won't recognize it or won't read it
you need to download the matching exe file, too. put both in the same directory and click (or double click) the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.
Similar Messages
-
What are the *.mnu files that download with the Hewlett Packer instrument drivers?
I have a rather odd problem. I ran a program on another machine and all works fine, but ported it to a vendor site and have only one issue that I can't seem to resolve. I'm talking to several HP6632A DC Power Supplies, an HP 34401A and an HP8720C. Everything is smooth until the HP6xxxA Read Output Voltage Current.vi is called. It shows 0 volts and 0 amps, on the Front Panel of this VI, even though there is a voltage and current value. The supplies are setting up fine, but for some reason this VI pulls back zeroes - and I've tried it on both of the supplies in the stand. There are no errors showing on the supply.
Now there is one difference, short of the obvious difference of the physical supplies. The vendor site has a USB to GPIB NI adapter. At the development site, a NI GPIB card was installed. Again, I'm puzzled due to the lack of any error.
Thanks in advance!Dennis - thanks. I fired up MAX and I do get the values back when I do either an IOUT? or VOUT$. Now I'm using Agilent (HP) drivers downloaded from NI, but again, I'm not setting the value.
I've attached the VI
Attachments:
Reading Power Supply Voltage and Current.vi 115 KB -
my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW files?
iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.
-
if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?
You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch. -
how can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2
I have configure NFS, I need help configuring the share that I created in the Sun ZFS STOR ZS3-2 to connect with the OS X Open DirectoryHi,
You may try checking the help page for ldap configuration :
https://<Appliance_IP>:215/wiki/index.php/Configuration:Services:LDAP
ZFS Storage supports LDAP, NIS, AD as directory service.
Hope Open Directory is also based on LDAP and may work in similar fashion.
Thanks
Nitin -
help me to play my music on the music app that comes with the iphone 5 . My replacement phone will not play my music stored on it.
Anybody have anything for me?
-
I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine? -
How do you get Raw images form a Canon 60D to open up on Photoshop Elements 9!
How do you get Raw images form a Canon 60D to open up on Photoshop Elements 9! I tried downloading the Adobe Camera Raw 6.2 update and Elements is not recognizing the file to install!
Go to Help>Updates in the editor and do it that way instead.
-
How do i remove the 17 errors that come with the pricing userexit manual at
how do i remove the 17 errors that come with the pricing userexit manual attached code...
Try connecting the phone to the computer in "data storage" or "data transfer" mode, then open the memory card folder in Windows Explorer, and search the sounds there. If you can't see them, go to "Tools>Folder Options>View>Files and Folders>Hidden files and folders" and select "Show hidden files and folders". But I think that it would be a lot easyer just to remove them from the playlist manualy.
Crossing bridges far ahead of the crowd. -
After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.
I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong". -
I have a keynote presentation that i built a while ago. How do i now identify the file names of the video files that are in the presentation?
With your presentation open, click on each movie element and read the name in the Metrics Inspector > File Info.
-
How are the .7z files used and installed for photoshop elements and premier elements?
How are the .7z files used and installed for photoshop elements and premier elements?
Hi,
You can try to extract them to a folder and then try to install using the setup file.
Or you can try to download the .exe file ( Small File ) for the software you have and then run the .exe file and it will start the installation. Both .exe and .7z file for the application should be in same location.
Download Photoshop Elements products | 9, 8, 7
Download Photoshop Elements products | 11, 10
Download Premiere Elements products | 11, 10
Download Premiere Elements products | 9
*** You can either download the .exe file from the above download links or you can also download both .exe (File 2 of 2) and .7z (File 1 of 2) from the above links. -
If I do a full system restore on my MBP will i get ilife off of the boot disks that came with the computer.
Hi on my MBP i am going to restore it.
It came with iLife will this be on the boot disks?
ThanksIf your computer shipped with Snow Leopard, that means it shipped with two disks: an Install disk that contains the OS, and an applications disk that contains the iLife suite. You would use the applications disk to reinstall iLife.
-
I have a pioneer 50 inch plasma + I purchased new from the company back in 2005. I tried to hook up an Apple Tv to the pioneer receiver that came with the TV. I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu. I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV. I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
BobI could not access the Apple TV on the television. If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help! Any more suggestions would be greatly appreciated.
Bob -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.
Maybe you are looking for
-
New Photo app on Mac. How can I (automatically) import new photos of the photo stream on my local disc (Mac)? Don't want to use new icloud service. Simply import. With iPhoto every new photo was automatically imported and saved on my local disk (with
-
My device does not automatticaly download and I have turned off I cloud
I am signed into I tunes. I have my I phone connected, but my device does not show up. I had disabled Icloud and still my device does not show up. I am trying to sync my pictures to get my available space on my phone to allow more things to be done
-
WLST script for changing password for userid in Weblogic 9.2
Hello Everyone, We want to change password for userid in weblogic 9.2. Is there a way we can do this by using WLST script? If so please provide me with steps for doing that using WLST. Thanks in advance. - - Weblogic Consultant
-
hello, We are building VLDB (15TB) 10.2.0.2 DB using ASM . Network team has provided drive sets in a companation of RAID5, 0+1 Mirrors. what is impact running ASM on top of RAID configuration?. Network guys will not provide non RAID drive sets. what
-
J2me cldc midlet for windows mobile(cdc) in netbeans
Hi, I have a midlet developed in Mobility Pack 5.0, and I have to change it so, that it works, and looks ok on Windows Mobile. That means that I have to port a cldc midlet to a cdc device. I've found two vm-s for windows mobile, for running midlets.