How do I get wrt54g-tm to work with Mac OS X with a cable...

How do I get wrt54g-tm to work with Mac OS X with a cable modem. Was told by tech support, they could not help me over the phone and to go on line for instructions. Still not working....

Do you have internet when wired to the router?
What exactly is the problem? What error messages do you get?
What are the current settings on the WRT?

Similar Messages

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

How do I get Front Row to work with Lion?

Hello fellow Mac users,
How do I get Front Row to work with Lion? I have an iMac 27 inch computer and is the sole entertainment provider for my bedroom. I refuse to put a TV in my room and wanted to know how to get Front Row to work again on my mac? It seems that the upgrade to Lion erased the app.
I have quite a few movies and series that I bought off iTunes and is a shame that I can't use a media center app like Front Row on Lion.

I kind of have the opposite problem. I need to know how to turn off my remote on the computer. I am using the remote for my Apple TV and it keeps making the volume on my Computer go up and down (with annoying sounds).
There used to be a way to un-sync the remote with the comp but I cannot remember how and the Apple help is not much help! I have Lion.
Thanks!
Best,
Tony

How do I get my AppleID to work with iCloud?

How do I get my AppleID to work with iCloud? It says that I have a valid ID, but that I can't use it with iCloud...
How do I fix this?
Thanks!!

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How do i get my sim to work with this phone?

I just bought a used iphone, when i put my sim card in, it says it is lock. I have done this before and been able to use instantly, but this time it wont come on. HOw do i get my sim to work with this phone?

If your iPhone was unlocked and has relocked after an update to iOS, then the iPhone was hacked to unlock it and has now been locked back to the original carrier. You'll need to contact the carrier to whom the iPhone is locked and request unlocking. They may refuse to do so since you're not the person with whom they had the contract.
Regards.

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How can I get elements 11 to work with 16 bits photos?

In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
Either way is expensive compared to photoshop elements.
http://www.adobe.com/products/cs6.html?promoid=JOLIS

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

How can i get ical invitations to work with outlook users?

how can i get ical invitations to work with outlook users?
I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

My Epson is able to do scans using Image Capture without any problems at all.
Allan

How can I get Phillips Fidelio to work with ios7

How can I get Phillips Fidelio to work with ios7. It worked with the previous operating system

Not sure if this is the same problem others are having, but I used to play music on my Philips Fidelio by opening the Music app on my ipad and clicking on the box with the triangle (which has now disappeared in the new OS). However, if you have the philips dockstudio app, the box still appears there and I was able to get my speakers working again.

How can I get my iMac to work with scanners?

How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

My Epson is able to do scans using Image Capture without any problems at all.
Allan

HT4623 iPad 3 how can l gets the SIM card works With iPad 3

As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

How manage to get my apple TV2 working with a nas like buffalo live with iTunes server?

i will probably buy a buffalo nas.
does this solution work with my atv2 as a mass storage?
can i stream films from the nas to my hdtv via teh atv2?
how manage to get my apple TV2 working with a nas like buffalo...
best regards,
yves

Yalgee wrote:
ATV2 should browse shared iTunes libraries in the same network.
Problem started when ATV only supports Apple home sharing.
I agree it would be nice if it worked with these NAS based iTunes servers but it doesn't, so if that's a necessity you would be better off looking at a media player from someone else and not purchasing DRM protected incompatible content from iTunes.
AppleTv 1 did not use home sharing and it didn't work with NAS itunes either.
We really need an Apple branded NAS that could home share, either that or they need to license the technology to 3rd parties, but frankly I can't see either happening.
Running a computer 24/7 is not ideal and one area where AppleTV1 was better in that you could store content on it's internal drive.
AC

How do I Get My Router to Work With iChat ? FAQ 2

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE
This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255).
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips

Replaces iCh: FAQ 2 How to get my router to work with iChat?
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have.
Routers seem to fall into two categories
Those that work straight from the box. See Apple Doc 93333
NOTE :This Doc has not been updated since Jan 04
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
DMZ Demilitarised Zone
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN)
NAT Sometimes called NAPT and related to Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You will need to set an incoming IP address (Usually 0.0.0.0 for any outside server), a port that data will arrive on, the Inside computers IP address (your computer) and the port it will deal with the data on and the protocol it will use.
iChat uses TCP and UDP so some devices will need the settings done twice, once for each protocol.
See Apple Doc 93208 for more information.
Note:
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678. When you click on the invite window the process moves to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP
Wireless
Here you will have to read around but this Apple Doc 58514 might be a good starting place.
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my pesonal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding.
With thanks to Macmuse.
Ralph
G4 Dual 1Ghz MDD with extra HDs X3. Mac OS X (10.4.3) Have you read the iChat FAQs ?? They have moved to Users Tips<</a>/span>

How do I get wrt54g-tm to work with Mac OS X with a cable...

Similar Messages

Maybe you are looking for