How do i give guest permission to Mac machines

I recently purchased the E2500 cisco router. How does the MAC computer be able to log in as Guest user to access internet?

also Open Cisco Connect and provide the Guest Password to the user.

Similar Messages

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

How do i give GoogleMaps permission to use my location

How do i give GoogleMaps permission to use my location - I re-set Privacy in Settings to turn it on and Google Maps still says it doesn't have permission

Look:
Settings>Privacy>Location Services and enable them for Safari.
Then try again.

HOw do I give QuickTime permission to run?

On my MacBook Pro (Yosemite OS) I've used QuickTime before with no problem. Today it's asking me for permission to run. How do I give it permission?

Ah, we call it Chrome, to avoid confusion with all the other stuff Google does. This page about Chrome seems to answer... Blocked plug-ins - Chrome Help

Some websites tell me that Silverlight needs my permission to work, how do I give this permission?

I have recently connected to a couple of websites and am told that Silverlight needs my permission to run. I am new to this and don't know how to give this permission. My computer is on XP and the Silverlight version installed is 5(5.1.30514.0)

Hi Kevin,
Which browser are you using? This problem may be caused by browser setting. The following are the solution for the browsers
we usually used, hope it helps. If your browser is contained, you could set your browser as the steps mentioned in below articles:
Chrome:
https://support.google.com/chrome/answer/2445334?hl=en
Internet Explorer :
http://social.technet.microsoft.com/wiki/contents/articles/30387.silverlight-trouble-shooting-installs.aspx#Permission_to_Run
Firefox:
https://support.mozilla.org/en-US/questions/956759
If your browser is not list in above, please feel free to let me know.
Best Regards,
Vegetable Wendy

How can I send registeration data from Mac machine to NT machine?

How can i send or post data from Mac machine to NT machine without using browser? I m stucked. I want to register a customer from Mac machine by a container i.e. Form having awt components etc. and send it to NT machine to trigger it into SQL Server. Can i use Servlet for this purpose? The problem is client machine have Mac and no browser. But host machine is NT based.

Thanks !
I have got that one. But its documentation API describes very little information. I could not properly follow. if there is some help to start up in HTTP client?
Can i use classes of HTTP client in my application and why i need it, I m not following as well. Please describe reply in detail.

How do I give Acrobat "permission to run" when it asks for it?

Sometimes an Acrobat document from the internet will open a blank black page with the annotation "Acrobat needs permission to run"
What do I have to do to get it to run?
Stuart Bennett
[email protected]

Ah, we call it Chrome, to avoid confusion with all the other stuff Google does. This page about Chrome seems to answer... Blocked plug-ins - Chrome Help

Virtual Operating System on Mac Machine?

How to use Virtual Operating System on Mac Machine?
How can i use a Virtual O/S on Mac Machine, what are the different free Software's that can help me?

Hey, guys! be careful, there's a sneaky catch with this "no-pdf-printer" thing.
The warning, concerns mostly the pros (publishers, editors, typographers....) who are used in CMYK chromatic gamut.
The catch is this: you get a CMYK archive, all right, but the color tone IS COMPLETELY DIFFERENT than the one you were used to get with the old good method. That's because, when you choose the "save as adobe pdf" option, initially you get an RGB CONVENTIONAL arch (check the "colors" tag: there 's no CONVENTIONAL CMYK option available). Of course, if you choose to Distill it so that your final arch is a PDF CMYK, what you finally get IS a CMYK archive, BUT: THE COLOR TONE IS TOTALLY DIFFERENT! The Reds are pretty much down, and there's a green-ish cast upon it.
What you can do (and this could be an answer to the dear friend with the difficult onscreen name) is this:
You can install a virtual PPD PRINTER (an LPD). If you Google "virtual ppd printer for OS 10.6" you get the directions, DIRECTLY from Adobe (anyhow, the link is http://kb2.adobe.com/cps/404/kb404931.html).
And... VOI LA! You can use this (choosing as a PPD Device the "GENERAL IMAGESETTER") in order to make things the good old way (print it as a PS and after DISTILL it enjoyably!!!).
I wonder, why Apple want to make our lives difficult, pretending the same moment that it only makes them easier...
Well, it's pretty much understandable: SNOW LEOPARD is the "prova generalle" before LION is unleashed. They test us, they weigh us, they are watching our reactions, thus validating for FREE their products. They are clever! but being clever just by considering the others (and treat them) as if they were fools, IS NOT HONEST AT ALL!
Got it Stevie?

How to give readonly Permission rights to 1000 users with button using powershell script?

$site = Get-SPSite
-Identity "http://mysite/"
$user = Get-SPUser
-Identity "mydomain\myuser"
-Web $site.RootWeb
$assignment = New-Object
Microsoft.SharePoint.SPRoleAssignment($user)
$role = $site.RootWeb.RoleDefinitions[[Microsoft.SharePoint.SPRoleType]::Reader]
$assignment.RoleDefinitionBindings.Add($role);
foreach ($web in $site.AllWebs)
if ($web.HasUniquePerm)
$web.RoleAssignments.Add($assignment)
With above script I can give Readonly permission to the users...but at a time I can give permission to only one user...Actually 1000 users requires these permissionMy requirement is I will have a textbox and a button.I will enter username in textbox
and when i clicked button the required permission should be assigned to the user given in the textbox...can you please tell how can i achieve this........how make to run powershell script when button is clicked.

Hello,
Instead of applying security to user level, it'll be better to create a SharePoint group where you will add the users. and use the outof the box interface to give permissions.
and for your button, just add the direct link to add user
http://serverurl/_layouts/15/aclinv.aspx?GroupId=7&IsDlg=1
replacing the group ID by the id of your new group (you can see it in the url when your are in the group)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

How to give same permission from SP2010 to 2013

Hi,
Please let me know,how to give same permission from SP2010 to SP2013.
because i am getting page not found error to all user who has permission in sp2010.
Thanks

then check this thread it has the same issue and proposed resolution
https://social.technet.microsoft.com/Forums/office/en-US/04a5dcc0-83f8-4b44-b84c-134922902010/migration-from-sp-2010-to-2013-user-permissions-not-working?forum=sharepointadmin
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

I have iPhone 4 and updated to iOS 6, after the update what's app asked I give it permission to acces my photos and I pressed no and now I cannot send pics and cannot see profile pix of my friends how can I fix it?! Thx

I have iPhone 4 and updated to iOS 6, after the update what's app asked If i give it permission to acces my photos and I pressed no and now I cannot send pics and cannot see profile pix of my friends how can I fix it?! Thx

Hi yanylove,
If you are having WiFi issues after upgrading to iOS 7, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
- Brenden

How to give security permission for html file which is accessing a database

there a applet code which is accessing database and i am placing that code in one folder in any drive and iam placing a
applet tag in a html file and storing on desktop.
now if i run that html file i am unable to connect to database and it is not not giving any exception errors.
what is the security permission we have to provide for that html file.
i want this solution immediately plz.

sign your midlet suite and give the permission in the jad / manifest
http://java.sun.com/j2me/docs/wtk2.2/docs/UserGuide-html/security.html

How to format MS-DOS (FAT) to Mac OS??

I need to format an MS-DOS (FAT) partition to Mac OS....
How do i do this in Disk Utility? It won't read the MS-DOS.. and renames it disk1s2..

Well actually i was trying to reformat it from MS-DOS to Mac OS. My Boot Camp partition somehow formated my external hard drive and while i can access my files in Windows, ofc i am not able to use it in OS X. So what i did was, luckily i had enough space for a new Mac OS partition that i can transfer my files too. Can you possibly help me with Windows? There is this common annoying thing, it won't give me permission to change my new Mac OS partition nor the MS-DOS partition :/. I've experinced this before, but if i can just find out how to get permission i can copy the files and delete the MS-DOS . Please don't respond telling me about restore function in DU, no offence of course .

How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

How do I replace someone else's Mac ID with my own?
Bought iPhone second hand on TradeMe.
Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
Would appreciate any suggestion ????
Thanks
SamSings

Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id.

How do i give guest permission to Mac machines

Similar Messages

Maybe you are looking for