How do i go wirelss with a 1st generation imac that is not airport enabled?

Hi there
Does anyone know if it possible to go wireless with a 1st generation imac that is not airport extreme enabled?
Thanks for your help

It's not a bridge. It is simply a ethernet to 802.11G adapter. It is just a different way of adding wireless to a Mac.
The Airport Extreme card is just $49 and it is internal. It is not hard to add at all to your first gen G5 iMac so I would go that way.

Similar Messages

  • 1st Generation iMac G5 with new main logic board but now no Bluetooth?

    Greetings:
    As an owner of a 1st generation iMac, I can finally report that my iMacG G5 is now working fine since the main logic board has been replaced because of bad capacitors.
    A NEW problem has been created. My internal bluetooth no longer works and is not visible in the hardware profile. I suspect that the Apple repair center may have removed my module or that it was attached to the old main logic board. On PC's running MS Windows (XP), there is a "hardware detect" routine.
    QUESTION: Can anyone tell me if the internal module is visible by taking the cover off? I cannot seem to find a photo of where or how the module is attached. I can see my Airport module. Regardless, the Apple repair center said to simply bring it back in and they would fix the problem. They indicated that it was a simple software fix. After trying many different software techniques, I still believe they somehow forgot that my computer had BT and it went back with my old logic board.
    Thanks in Advance,
    Jeff

    We discovered the problem. After taking my iMac G5 back to the Apple service center, I got to observe the technician remove my G5 cover and bluetooth module.
    The problem was due to the fact that the initial technician apparently did not realize he/she broke off the very small connecting pins on the module when he/she removed it from the original main logic board with the bad capacitors. They simply screwed it on the main logic board. They order a new BT module to replace the broken one.
    FYI: It is very easy to install the BT module on the main logic board as I observed. No soldering, etc.. The location is directly above the power supply but below the airport card. It is about the size of a postage stamp and is in clear view withou removing any parts.
    Thanks to All....Miriam...
    Jeff

  • How do you get apps for the 1st generation iPod touch

    How do I get apps for the 1st generation iPod touch?

    By updating the iOS on the iPOd.  The 1G can go as high as 3.1.3.  That works with a lot of apps.  But some apps require a higher iOS and/or newer iPod.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

    Welcome to the Apple Community.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • 1st generation iMac G5 won't start up with LaCie connected

    Sorry if this has been asked a zillion times, but I am trying to help a friend (as you can see it is not my iMac):
    She has a 1st generation iMac G5, and a LaCie external harddisk connected by firewire. The LaCie has an independent power supply, i.e. not powered by firewire.
    Her iMac starts up fine when the LaCie is NOT connected, but refuses to do so when it is. This problem did not always exist.
    Does anyone have the answer - better still a cure?!

    Is the LaCie on and showing on the desktop when she shuts down? It's always a good idea to eject FW drives before shutting down, and to start up with them unplugged, otherwise data corruption can occur.
    Miriam

  • Why isn't the new iOS4 update compatible with the 1st generation iPod touch

    It makes me extremely angry that i have wanted what the new update contains ever since i got my ipod and now I can't have it because whoever made the update didn't make it compatible with the 1st generation iPod touch. Ig someone could give me a good reason as to why this happened that would be much appreciated.

    Doesn't have the needed hardware in particular not enough RAM.

  • How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    It has always been very basic to always maintain a backup copy of your computer.
    Did you fail to back up your pics?
    The photo sync is one way - comptuer to ipod.
    You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

  • How can I merge folder with the same name so that the content does not replace the other

    How can I merge folder with the same name so that the content does not replace the other?

    >
    That's only a good idea if the semantics of sayHello
    as defined in MyInterface suggest that a
    RemoteException could occur. If not, then you're
    designing the interface to suit the way the
    implementing classes will be written, which smells.
    :-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
    Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

  • Can I use Bluetooth headphones with a 1st generation iPhone?

    Can I use Bluetooth headphones with a 1st generation iPhone? The headphones pair but the sound comes out of the phone and not the headphones. The phone has iOS 3.1 which is the last software the phone will support. Thanks.

    This will help you:
    Original iPhone
    The original iPhone features Bluetooth capabilities only for making calls. Connecting to a PC or streaming audio other than phones calls through Bluetooth is not supported.
    IPhone 3G
    With the iPhone 3G operating system, its Bluetooth capabilities are expanded to support wireless stereo headsets, file sharing with other Bluetooth devices, and use of the iPhone as a 3G modem. Also supported are new capabilities for combining the iPhone with Bluetooth accessories.
    IPhone 4.0
    The 4.0 version of the iPhone's operating systems keeps the expanded Bluetooth functions introduced in version 3 and adds one new benefit: Bluetooth keyboard support, so iPhone owners can use wireless keyboards wherever they go.
    Sponsored Links
    Read more : http://www.ehow.com/facts_6926213_iphone-bluetooth-capability_.html

  • How can I see in my address book all contaacts that have not been placed into groups?

    How can I see in my address book the contacts that have not been put into groups?

    The best way to do that is create a new "smart group" with the following:
    This way you can identify those without a group and drag them to one.
    Regards,
    Captfred

  • TS1363 1st generation iPod shuffle does not show up in iTunes (windows 7)?

    1st generation iPod shuffle does not show up in iTunes on my Windows 7 PC (but shows up in my computer).  Tried all the Apple trouble-shooting steps (some several times).  It used to work with Windows 7 on this PC.  Are there other steps I can try? 

    I'm not sure what "all" means, unless you state them, so if you have not done so already, you should use this procedure to reset the iPod shuffle
    http://support.apple.com/kb/HT1655
    Then, shut down your computer (power off) and start it up, with iPod shuffle NOT connected.  Run iTunes.  Then, try connecting the iPod shuffle again.
    Since this is a first gen iPod shuffle that IS recognized by the computer (so it's probably not a bad USB connector), you can also try using the iPod Reset Utility
    http://support.apple.com/kb/HT1238
    This is for the first and second gen iPod shuffle only, and does a lower level reset than using a normal Restore in iTunes.

  • How do I download Adobe Flash Player for a computer that does not have internet?

    How do I download Adobe Flash Player for a computer that does not have internet?

    Hello Walter,
    that's it, usually you get and Adobe Flash Player Installer only.  For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
    Hans-Günter

  • My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

    I think iCloud isn't coming until this fall and not until iOS 5 is publicly available. Right now there is confusion because all this stuff is still in beta and things are under NDA and may still change.
    I'd just set the 3GS up the same as currently. When iOS 5 is available in the fall (and I don't think Apple has specified beyond "fall"), before you update, there should be any number of guides to setting things up and how it will all work. http://macworld.com is a good place to look for such information.

  • How do you delete an email address from your iPhone that's not in your contacts?

    How do you delete an email address from your iPhone that's not in your contacts?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?

    How do I reinstall Adobe Creative Suite on my iMac that doesn't have a CD drive?
    I had to wipe my hard drive including my apps and I don't know how to reinstall my adobe software.
    Please help

    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    You will need your serial number.  If you have the discs you should be all set.  If not, then you should be able to find it thru your Adobe account online if you registered the software previously.
    You might want to contact Adobe Support thru chat before you activate the new installation if you would like to free up the activation that might have been left in limbo.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Maybe you are looking for

  • Using dtrace how can we get the functionality of prstat ,vmstat

    Hi, I would like to know what probes can be used to generate a dtrace (.d) script which could produce the output of prstat,vmstat etc.I cannot use these commands at the command prompt directly to know my system's behavior.Can any one here help me out

  • How to set the language for a RFC call ?

    Hi, when calling from BSP (WAS620) to our R3 using RFC the results (units, ...) are always in DE. How do the call to get the results in EN? Language in RFC Destination/Logon&Security does not have an effect. thx for your support.

  • How to return the values of LOV to items in forms

    Hi, I have created an LOV based on a select statment that return 3 columns I want to return theses 3 values to 3 items in the form? I'll appreciate any suggestion. Imad.

  • Connect to itunes frozen screen can't sync because of passcode

    my itouch has been frozen with the connect to itunes screen for a few days now. when i plug it into itunes it says unable to connect put in passcode. but i cant put in my passcode because of it being frozen.  I've already tried reseting it but it doe

  • Data pump issue for oracle 10G in window2003

    Hi Experts, I try to run data pump in oracle 10G in window 2003 server. I got a error as D:\>cd D:\oracle\product\10.2.0\SALE\BIN D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du mpdir dumpfile=expdp_sale_20090302.dmp log