How do I have more than one web page on at a time?

I can only watch or use one web page at a time. I f I try to get on something else it will knock me out of what I was doing on the other page.

reboot in safemode and repeat the same behavior you did previously. If it works then it's likely an addon issue or extension causing your problem.
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Similar Messages

Hello - how do I have more than one app window open at a time on OS X 10.9.1

Hello - how do I have more than one app window open at a time on OS X 10.9.1? I do not want to hold the option key to have multiple apps open on my screen. Thanks.

Barney-15E
Finder enhnacements installed? = no. I did a reinstall of Mavericks, not a full clean install = no help. Searched for "single-app mode" in Spotlight and the web, no luck.
With Safari open on screen, from dock, opened iTunes and Safari does not show on screen. Open Word from doc and iTunes is not on screen.
Attached some screen shots if these help.

How do i have more than one computer to apple tv

how do i have more than one computer to apple tv

My answer is based on guessing what your question is since it seems a little incomplete.
When enabling home sharing with an Apple ID on your Apple TV, this can be done with one Apple ID only. Now when enabling home sharing on your iTunes device you need to use the same Apple ID. You can do this with several devices, however the Apple TV will always only find the first device that comes online since it cannot differentiate between different home sharing devices with the same Apple ID.
When using AirPlay you just need to be on the same network with your device. For example I can go to my best friend and watch my movie there on his Apple TV and vice-versa unrelated from the fact that we use different Apple IDs of course.
I hope this answers your question.

HT204053 how do I have more than one icloud account on one computer

How do I have more than one icloud account on one computer?

It isn't possible to have more than one iTunes account on your phone.

Can I have more than one home page so that both would open upon connecting to the internet?

On my desktop I can have more than one home page so that they all load when I connect to the internet.
On my laptop, I cannot figure out if or how I can add a second home page. Is it possible to have more than one home page on my laptop?

Firefox can have more than one homepage. Multiple homepages are separated by the keyboard character "|".
*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

When in safari how can i have more than one window open?? New ios doesnt allow it.

Problem is when i updated to the newest ios 7. The dang thing doesnt allow me to have more than one window open at any time. This only makes things repetitive, complicated and slow. Moreover, the icons and overall view are probably designed to be in a kindergarden game, cos they look really stupid on iPad, whos gonna take apple seriously with this so called "improvements". If anyone knows how to open more than one window at at atime i,ll be really grateful to be told. Or if anyone can tell me how to uninstall the friking update i,ll be even more grateful. Thanx guys.
<Subject Edited by Host>

Tap "+" sign on top right.

How can I have more than one page open at a time?

I would like to have more than one page open at a time- not tabs, but whole pages. How can I do this? I want to be able to have the pages side by side, instead of having to switch back and forth.

Fox Splitter (formerly Split Browser): https://addons.mozilla.org/firefox/addon/4287

How do I have more than one iTunes account on my iPhone?

Having issues trying to help a customer add both her iTunes accounts onto her iPhone from her MacBook. Any ideas?

It isn't possible to have more than one iTunes account on your phone.

More than one web page on .Mac?

I already have a personal web page set up, but would like to set up a page for my Rotary Club. I don't want everyone to have to go thru my personal photos, etc just to see Club calendars and upcoming events. Can I have more than one site if I have storage room available?
2.1 GHz PPC G5, 1.5 GB DDR Mac OS X (10.3.8)

rcfgunkie,
Welcome to the discussions.
Navigate to your Web/Sites folder on your iDisk using the Go menu in Finder, and following this path:
Go/iDisk/My iDisk/Web/Sites/iWeb
In the Sites folder on the iDisk, and above/next to the iWeb folder, you will see an index.html file. Using the Finder again, create a new folder on your desktop and name it iWebIndexFile. Drag the index.html file from the iDisk Site folder into this new folder. It will be copied there. You will use this file again later to bring your short .Mac url back to your original site, as it is now, should you decide to.
Close iWeb.
Create a new folder on your desktop, and name it for the new site.
Navigate to your Domain file, following this path.
While holding down the option key, drag this Domain file into the new folder. It will be copied there. Create another folder on the desktop, and name it BackUpDomain. Option-drag the Domain file again, into the BackUpDomain folder. Now place this backup folder in your Documents folder. Close the Finder window, and open the folder which is named for the new site. Double-click on the Domain file inside.
iWeb will launch, and you will see your site as you have always seen it. The first thing you need to do is rename this site in the Site Organizer, giving it the name of your new site. Otherwise, it will overwrite the existing site on the iDisk when you publish it. Now delete the pages you do not want to keep, and create your new Welcome/Home page with the appropriate links in the navigation menu for this "new" site. You may also need to rename your pages. File/Publish to .Mac.
You now have two separate Domain files, containing two separate sites. When you launch iWeb, the application will open the last site that you edited. Create another folder, and name it for the original site. Navigate back to the path you used earlier for your Domain file, and again, holding down the option key, drag this Domain file into the new folder which has the name of your original site. Now you have two folders on your Desktop, each containing a individual Domain file, for your two sites. (You also have a backup of your original Domain file containing your original site, in your Documents Folder.) Create one more folder, name it Domains, and place both of these "Site" folders inside of this folder for good organization. From now on, to open either of your sites, choose the appropriate Site folder in the Domain folder, open it, and double-click on the Domain file inside. iWeb will open that site for you.
If your short .Mac url is pointing to the "new" site, and you do not wish for it to, navigate back to your Sites folder on your iDisk and replace the index.html file with the one you copied earlier; also, use the copied index.html file to replace the one in the iWeb folder which is next door to the Sites folder. Your short .Mac url will now point back to your original site, and you will access your "new" site using the url web.mac.com/username/iWeb/nameofnewsite.
Mark

Scoring question - how do I see more than one instrument's voice at a time?

I'm trying to compose pieces for different symphony orchestra instruments, but its imossible to toggle back and forth between the matrix view of seperate tracks for arranging the voices of the chords. The only way I can seen the notes in a chord is double click in the matrix view of individual track, but it just piles everything into one view and you can't manipulate it in any sensible way I can figure out.
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).

Mortal Portal wrote:
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).
i'm not exactly sure if this is what you mean, but if you want to see multiple instruments in the score view, just clicking anywhere on the "paper" brings up all the instruments used. if you want to see each single instrument come up in the score view, i think, like the previous person said is a matter of arranging the windows in the specific screenset, and having an Arrange and Score or Arrange and Matrix so that you can click on the regions and they'll come up on the other screen.
Make sure you save and/or lock your screensets.

How do you have more than one parameterized Query to display "All"?

hi,
I am using:
Jdeveloper 9.0.5.2
Oracle Database 9.2.0.1
Toplink
Struts
I have been able to create a parameterized query to display an html read only table.
I populated a dropdown list with values from the database
and the values I select will be the parameters to my read only table.
The drop down list is on the same page as the read only table.
I have all this working but I also need to hard code an option in the Drop down to "All"
to represent all values of this parameter.
I was able to trick the jsp page using two read only tables
and displaying the one with the parameterized query when a parameter other than "All" was chosen
and then display the other only when "All" was chosen.
This does not seem the best way to do it.
What if I had more than one parameter and I wanted to show "All"
the values of one and a certain values for another.
I would then need at least 4 read only tables.
How do I accomplish this in an easier way?
Thanks in advance.

I am not exactly sure what you are asking... Are you having trouble with TopLink, or another part of your application?
Peter Krogh

Can't have more than one item on at the same time

Hello,
I have a WRT110. I have two wireless notebooks and a wireless printer on a network. Everytime I turn more than one thing on, it makes my connection drop. Example, I will have my notebook on and if I want to print something out, I turn on the printer and bam, I've lost my wireless connection. What am I doing wrong? Its to the point where if my husband is online and I turn on my Ipod it connect to the internet and my husbands connect ends. We keep having to reset router and modem. Any help would be greatly appreciated!
Solved!
Go to Solution.

1. Goto Control Panel > Network and Internet > Network Connections.
2. Right click on ‘Local Area Connection’ & click ‘properties’ option.
3. Uncheck ‘Internet Protocol Version 6 (TCP/IPv6)
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Domain settings for more than one web page?

I am a new mac user and I love it! I recently created a web site and purchased a domain from a 3rd party and set it up to the web.mac etc;my web site works great love it. I have now purchased a second domain from a 3rd party and created my 2nd web site and I have set everything up just like the first site and it has been over 48 hours since the change and I cant seem to go to the site it says no page found? I have tried to set up personal domain for the 2nd site and it only shows the first site domain set up, and wont let me add a 2nd domain site? From my understanding you are able to manage and have several web sites? Is that correct? What am I doing wrong? Has anyone set up more than one personal domain and sites? If someone could help me I would really appreciate it. thank you very much Karen

You can only use the personal domain option once, that is CNAME, for every .Mac account. It just means that for your other website you will have to use the web forwarding option instead.
As well as DNS settings there should be web forwarding options at your hosting company. You need to go to these and then forward your domain name to web.mac.com/username/sitename.

How can I have more than one mobleme site?

I currently have two registered domains with godaddy.com and created a website with one of them on iweb and published it to my mobile me account. However I want to create a second website on mobleme. I have another domain that I want to use and publish to mobleme, but have discovered I can't. It appears that I can have only one domain registered to mobileme. Is there anyway of add my other domain and also host it on mobileme under another name other than the one I already have?

You can have only one domain re-directed to MobileMe via CNAME. You can have more domains re-directed to MobileMe via Web-forwarding — with or without masking. Read more here:
http://iwebfaq.org/site/iWeb_Domains.html

I can no longer have more than three web pages open at one time.

I used to be able to have many web pages open at once and go back and forth between them as I pleased. Now--only three. I have no idea why.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I have more than one web page on at a time?

Similar Messages

Maybe you are looking for