How do I have photographs download to external hard drive. What setting do I use?

How do I set up my system so that photographs automatically download to external hard drive? What settings?

Without knowing more about your workflow its difficult to answer this as there are a number of different ways to accomplish this.
But assuming that you are asking how to do this in Aperture one way would be to set Aperture's import to store the files on your external drive.
By selecting the Store Files pulldown and then choosing Choose... you will be able to select a folder on your external drive. (note in the above screen shot the selection is actually In the Aperture Library you would click on Choose.. at the bottom of the pulldown)
This will cause Aperture to store the files in the folder you indicate and et up the masters as referenced.
But again it would be better if we had a better idea of what you are trying to acomplich and what your workflow is.
regards

Similar Messages

Partition external hard drive-what format do I use

I'm trying to partition an external hard drive by following the instructions in the disk utility help and am confused about which "format" to use. My choices are: Mac OS extended (Journaled), Mac OS Extended, Mac OS Extended (case sensitive, journaled), Mac OS Extended (case sensitive), Unix file system and Free space.
I've looked in the forums and in the disk utility for definitions of these terms and am sorry if its there and I just don't see it.
On a different subject is there any opinion as to whether I should create a partition that should or should not be used for startup? What is the difference and which is better?
Thank-you very much,
Margie

Choose Mac OS extended (Journaled) unless you have a specific reason to use another format.
(31565)

External hard drives - what brand do you use

I'm looking to buy an external hard drive, maybe I'm a bit paranoid, but I'm thinking about getting a RAID1 setup. I have a lot of valuable pictures in I-Photo, a lot of music in I-Tunes, and would not be a happy camper if my internal HD fails.
Would you give me some ideas as to the external HD brand/model you use - anybody use a RAID setup for redundancy ?
Thanks,
Bob

Hi Bob, I wouldn't go RAID at all, though Raid1 is pretty good you still have problems with RAID, the whole reason they came up with RAID5, RAID10, etc...
I think two independant drives are better than 2 tied together, and there are many options for backups.
Almost more important than the External Drive itself is the Chipset in the External, Oxford being good & Prolific & others not so.
My Books have had far less than glowing reviews for Macs...
http://discussions.apple.com/thread.jspa?threadID=2191614&tstart=0
http://x704.net/bbs/viewtopic.php?f=12&t=3219&p=42023&hilit=western+digital#p420 23
http://x704.net/bbs/viewtopic.php?f=6&t=2939&p=34120&hilit=western+digital#p3412 0
If you try LaCie then have a few spare Power Supplies on hand.
I'd stay away from Bus Powered drives & 2.5" drives also, here's some choices, I'd go Firewire & drives with a 5 year warranty over 3 year warranty...
http://eshop.macsales.com/shop/firewire/
Lately I use the Voyager...
http://discussions.apple.com/thread.jspa?messageID=10618536&#10618536
Also see the last post there for the OP's review.

When I plug in my ipad it automatically tries to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?

When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?

You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
tt2

Need to download a programme to set up VPN but I can't access the website as it is also blocked in china? how do I install the programme if I cant download it or have it on a external hard drive.

Need to download a programme to set up VPN but I can't access the website as it is also blocked in china? how do I install the programme if I cant download it or have it on a external hard drive.

Not sure I understand you correctly.. Are you currently in China, and therefore unable to download the app? Also, which program is it that you're trying to get?

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

I have downloaded mavericks to my external hard drive, what do I do next to go back to using Mavericks?

i have downloaded mavericks to my external hard drive, what do I do next to go back to using Mavericks?

I would not use Time Machine for this task. Rather I suggest you clone to the external drive. You can then boot from the external drive to restore your clone. First, purchase Carbon Copy Cloner.
Clone using Carbon Copy Cloner
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the right side dropdown menu.
4. Click on the Clone button.
5. When completed select Disk Center from the Window menu.
6. Click on the Recovery HD tab then select the backup drive from the list.
7. Click on the button labeled "Create a Recovery partition for this volume."
Destination means the external backup drive. Source means the internal startup drive.
You now have a fully bootable copy of your iMac's hard drive. When you receive your iMac back after the drive replacement you can boot it from this backup and use Carbon Copy Cloner to restore the backup from the external drive to the internal drive. The process is identical except you will switch the Source and Destination volumes - Source will be the external drive; Destination will be the internal drive.
Because the newly installed drive will most likely have OS X installed you can skip Steps 5-7. You can now continue to use your external backup drive by setting up scheduled backups with CCC. No need to use Time Machine.

I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write

Hello, All,
I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write without reformatting it ?

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

HT1751 how do you move downloads to external hard drive using lion

How do you move a download from the iMac to an external hard drive?

Then you are using a drive that is formatted for a PC. It's probably formated as NTFS, you can easily check by locating it in a finder Window and type Command I. If you plan on only using it with the Mac then reformat using Disk Utility. Here is a link with some simple to follow instructions.
http://www.cultofmac.com/92845/formatting-external-hard-drives-in-os-x-video-how -to/
If you plan on sharing the drive with a PC then let us know and we can provide some instructions.

I have connected an external hard drive to my new macbook pro. I only have read access. How do I copy folders to the external hard drive?

I have a new Macbook pro retina. I have connected a WD external hard drive, but have only read access. I want to back up my computer, and have the ability to archaive files. Any suggestions?

I have connected a WD external hard drive, but have only read access.
As ds store already pointed out, if the drive is formatted as NTFS, you can't write to it. Fortunately, the fix is easy, just erase the hard drive using Disk Utility as Mac OS Extended (Journaled).
I want to back up my computer, and have the ability to archaive files. Any suggestions?
Backups and archival backups are not necessarily the same thing. An archival backup is to be kept indefinitely far into the future, and should never be changed after it is created. That does not mesh well with being on the same drive as a backup maintained day-to-day. Ideally, archival backups should be written to one drive - possibly multiple backups, but each one should never be touched after it is written - and other backups should be maintained with greater frequency on one or more other drives.
You can get a bit of compromise with an incremental backup, like what Time Machine does. That will keep old data as long as there's still free space on the drive, then will start removing the oldest copies of files to make space for newer stuff when necessary. Another alternative is the way Carbon Copy Cloner does incremental backups, where the data keeps piling up until the drive is full and then the backups fail until you remedy the situation. (This could allow you to fill up a drive and then put it on a shelf as an archival backup and start a new backup on a new drive.)
If you can specify more what you want to do, we can advise you better.

How do I combine an old itune library thats on an external hardrive and a newer library thats on a newer computer into 1 library and keep them on the external hard drive so I won't use up all my memory on my newer laptop

I copied an old iTunes library off my old Toshiba laptop with windows xp and put it on an external hard drive. I have a newer Microsoft surface pro laptop with windows 8.1. I have a small iTunes library on my newer laptop. I want to combine the 2 libraries into 1, add newer podcasts to the combined library daily, but keep it all on my external hard drive, so I don't use all my memory on my surface pro. I have an older ipod classic that I have all my old library on. I love it and don't want to stop using it, but want to be able to add podcasts from my 1 library from time to time. What I usually do is download podcasts for a few weeks then, download them to my ipod. Haven't done any of this in about a year. But want to start getting regular with it again. PS I'm not very computer savy Thanks for any help or advice!

This article explains how to open a different library: iTunes: How to open an alternate iTunes Library file or create a new one. The assumption is that the whole library was copied to the external drive from the old Toshiba laptop, not just the media. If that isn't the case make a new library on the external drive in a folder called \iTunes and move the media inside \iTunes\iTunes Media before adding it to the library.
Once iTunes is using the library on the external drive you can add any content stored on the internal drive to the library by drag & drop or by moving/copying the content into \iTunes\iTunes Media\Automatically Add to iTunes. Make sure the option under Edit > Preferences > Advanced to Copy files to the folder iTunes Media when adding to library is selected. Once complete you can delete the original copies on the internal drive.
Should your library contain duplicates after merging see this recent post on deduping.
If there are ratings, playlists, play counts, or content stored on the iPod classic and not located anywhere else then see Recover your iTunes library from your iPod or iOS device.
Ideally you should backup your library to a second drive for security. See Backup your iTunes for Windows library with SyncToy for a suggested strategy.
tt2

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

How can I add media from an external hard drive into Premiere Elements? Please answer.

Alright, so I have looked all over the website and the way adobe's frequently asked questions about adding media did nothing for me. I am editing a large full length video in premiere elements 13 and so I would like to add media from my external hard drive and edit from that location. Is that possible? Because I do not have enough space on my laptop to keep hundreds and hundreds of GB of videos on my internal hard drive. I have looked on how to add media from the hard drive location and adobe says to add it using the files and folders tab, but when I select it to add it, it says I need to use the Video Importer. So I go to use the video importer and have no way of figuring out how to select my hard drive. Any ideas?

Spencer WhiteOut
Thank you for the follow up with the information
it is a MacBook pro retina . OS X Operating system. External hard drive is connected by the USB cable. fat32.
It is my understanding, whether you have Premiere Elements on Windows or Mac, if you have files on an external hard drive, you do not select
Add Media and head for a choice that includes Video Importer. Instead, you select Add Media/Files and Folders and navigate to the external hard drive to select your file(s) for import into the project.
But, you seem to be saying that when you do you are met with a message to use the Video Importer. Does the message give you any other related information on why you are being detoured to Video Importer since Video Importer does not import from an external hard drive for me or you. It does for me using Add Media to get the files from my external hard drive into a project. I am strictly an Elements Windows user, so my Mac information is from what I have read. Based on that...
1. Please evaluate the format of your external hard drive. Please review the following if you have not considered this point before.
http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os-x/
There are many online articles on this matter which would point you away from Fat32 as the format for a external hard drive Mac.
2. From what you wrote, you are not dealing with a DVD drive so I see no way to implicate one of them in this issue. You are dealing with an
USB external hard drive and not a USB external DVD/CD drive. Correct?
Please review and consider.
We will be watch for further news from you.
Thank you.
ATR

I have Lion on an external hard-drive and I want to install it on the internal disk

I have Lion on an external hard-drive and I want to install it on the internal disk. How can I proceed?

I recently completed a clean install of Lion on an internal SSD. After wiping it clean, I used a thumb drive with SL on it to boot and then another thumb drive with Lion on it. It worked just fine. The only thing to be aware of is that if you use the thumb to install Lion from... it will not install a recovery partition and you'll have to use the thumb in the future.
That's what I wanted anyway so it's working out just fine. Good luck.
I should add... I used the SL thumb to actually boot from and used Disk Utlities to wipe the internal SSD. It does work and there are Apple posts that can guide you through the thumb drive process. I used copycat to create both the SL boot and Lion.

How do I have photographs download to external hard drive. What setting do I use?

Similar Messages

Maybe you are looking for