How do I have the audio of a clip play underneath a black title page?

I have a project where I am asking a couple the same question seperately. I have a black title page that writes out the interviewer's question for 2 seconds, but while the title page is displayed, I would like to hear interviewer asking the question (without seeing the footage). How do I place a black title page in front of a clip so only the audio plays while the title page is running?
THANK YOU!

The simplest way would be to
0) In iMovie/Preferences make sure that the Advanced Tools are enabled.
1) Add your tite to the movie.
2) Find the event clip that contains the audio and select the portion that you need. Drag it to the project and drop it on the Title. A pop-up menu should appear. Choose "Audio Only".
There are other ways as well if this does not work for you.

Similar Messages

  • How do I synch the audio and video to play together in iMovie? And why is it not synched?

    My iMovie the video is not synched to the audio.  It could be about two seconds off.  And sometimes the sound just stops. I tested it on Quick Time Player and burnt it to a dvd and it does the same thing.  The sound then stops halfway through besides my ilife sound effects.  How do I synch the audio and video to play together in iMovie and dvd?  I taped the movie from my digital camera and it hasn't done this on imovie before. Any Help?

    This may help:
    iMovie: Improving audio and video synchronization
    http://support.apple.com/kb/TA25603?viewlocale=en_US

  • How do you overlay the audio from a clip over a iphoto slideshow clip ?

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
    thanks ! HELP!

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    "Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • How do I unmute the audio on a clip in Imovie trailer.

    I am using a Mac Book Pro brand new 2014.  I am using the latest version of Imovie and I am creating a trailer.  I have tried to un-mute the clip from the volume icon on the clip and through the modify menu.  I have when into the "adjust" menu but the audio is not available to edit.  It seems to be random. It doesn't happen with all clips I have added.

    Me too...
    https://discussions.apple.com/message/11566189#11566189

  • How do I fix the audio dropouts and clipping/clicking since upgrading to Mavericks?

    Since I upgraded to Mavericks on both my MacBook Pro (15" Mid 2010) and my Mac Pro (2 x 2.26 GHz Quad-Core Intel Xeon, Early 2009), I've been getting various audio playback issues.
    Randomly, I can be on a website like YouTube or Vimeo, or using software like Ableton or iTunes, or even just Quicktime, and the audio starts struggling and clicking/popping.
    Considering I'm an audio engineer by trade, this is more than a little annoying.  A restart seems to temporarily fix it, but it can happen hours or even minutes later.
    Anyone else having this issue?  Is there a fix?

    I'm having this problems too on my audio interfaces, it's soooooooo really really ultra annoying... gosh, if just i'm not installing this horrible Mavericks update. PLEASE APPLE DO SOMETHING ABOUT THIS!!!

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • Have imported video into audition but how do I get the audio to snap after editing?

    Just to explain, I have imported a timeline from Premiere into Audition CC. I have one full piece of video and one piece of audio but need to clean up the audio. What I'm trying to do is edit the audio and have it snap to the piece of audio to the left as you would do normally. I will then concern myself with cutaways etc to mask the video when back in premiere. My question is how do I get the audio and video to snap in sync with my audio edits( Can't seem to get it to snap at all at the moment)
    Cheers

    The video in Audition is just a guide and can't be edited. So if you cut out chunks of the audio it will no longer be in sync with the video if you try and join the audio together.
    When you say that you are cleaning up the audio what do you need to do to it in order to clean it? If it is just a case of muted unwanted parts of the audio that can be done in Multitrack by using the Volume envelopes to mute the audio at appropriate places without cutting anything out so it won't lose sync.

  • How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

    How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo  and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no  effects is going thru?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How can I add the audio content cd after logic finished installing ?

    There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
    If you can help me please be very specific as to how to do it so that I can follow the directions properly.
    Please help me.
    Thanks

    Hi
    You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
    CCT

  • How can i cut the audio from 1 file and put it on another?

    I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
    btw i have quicktime pro is that changes anything

    Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
    Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

  • How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    Binbashi
    You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
    To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
    You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
    If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
    Looking forward to learning of your results.
    Thank you.
    ATR

  • How can I record the audio for a radio station I'm streaming LIVE?

    How can I record the audio for a radio station I'm streaming LIVE?
    I don't want to record the sound in my room, but only on the sound I'm streaming

    Grane Duke wrote:
    To reduce or make the room noise as low as possible (to get the best audio recording), I recommended the OP to try to record the radio live streaming audio in a silent room. Does it makes any sense to you....??
    No. Preferably one records using direct input.
    Your comment  It doen’t matter whether he/she is recording the audio from the macbook or any external speakers because if the room is noisy than obviously the ambient room noise will be recorded.  is pretty silly really. Think about what you just wrote.
    And you do have a bad habbit in your posts of over using ???????? & !!!!!!!!!!!!!
    One is enough.
    Cheers
    Pete

  • HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

    How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

    Hi rationale1,
    Welcome to the Support Communities!
    The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
    The link below will explain the Dolby Digital parameters and options in Compressor 4.   You may need to research a different DVD authoring software to achieve your desired result.
    Dolby Digital - Compressor 4 User Manual
    http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
    Dolby Digital
    The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format. 
    Note:  All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
    DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
    DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
    Tip:  For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
    Cheers,
    Judy

Maybe you are looking for

  • How to control screen ML81N

    Hi expert, -In ML81n, I know when we edit one Service Entry (SE) and move to the other SE within the PO, SAP system will not save the data. -But when we move from one SE from one PO to the other PO, SAP system will as for save before proceed. -So, my

  • Video drivers crash on cs5

    This past week my photoshop has been saying "Video drivers crashed" on startup, and I can't use scrubby zoom or any 3d features.  Every few startups photoshop also crashes. I tried to update my video drivers, then I did a clean install of them, and n

  • Find / Replace window STOP autopaste

    Arrgghh.... I could not find a preference setting to Turn Off the auto-pasting of the <current selection> into the Find field of the window, and the clearing of the Replace field. This is really obnoxious... Help!

  • How to hide FPM SubView

    Hi there, I need to hide an FPM subview depending on some logic. This view has been added at design time but should be made invisible until a condition is met. I've checked the method OVERRIDE_EVENT_OIF and the object IF_FPM_OIF but it doesn't seem t

  • Mono audio instrument tracks

    Good day To each and every! I saw this posted one time before but i cant seem to find the post. All of my audio instrument tracks are in mono for some reason. Im still using 7.2 and this is the first time this has happened. how do I make all of them