How Do I have to Make Mesh for Small Structures in MWO?

Hi there,
I am using AWR Microwaveoffice in order to simulate the electromagnetics of nanomechanics. The unit length of the nanomachanics was 1um and the minimum dimension of the structure was about 15 um. I made mesh and simulated the circuit using the AXIEM solver. However, the result was absurd -- the linewidth of the S12 parameter was about 100 times larger than the experimental value. I found out that the mesh shape was odd; as shown FIG.1, the mesh was not reflecting the shape of the circle and the combs. Thus I think that the mesh settings were wrong. Could you please tell me how to make mesh for small structure in MWO? And also I don't know what the large rectangle in FIG.1 means.
Solved!
Go to Solution.
Attachments:
FIG.1.png ‏25 KB

Hi
Thanks to your replies, I succeeded to make the mesh as shown in the attached photo. However, I still have a problem; I cannnot find any dips in the resulting |S12| graph, which is suppoesed to have a sharp dip between 5 GHz and 15 GHz. I tried to figure out the reason but I couldn't. Could you help me plesase?
Attachments:
mesh2.png ‏143 KB

Similar Messages

How can I have the articles listed for all of the asssortments?

How can I have the articles listed for all of the asssortments without any condition? Is there any customization for this?

Can you make some explanation? Is it OK if I choose "02 - Listing without qualification" as listing procedure?

How do I have 1 apple id for the family to use in the iTunes and app store and a different apple id for iCloud and FaceTime and imessages

how do I have 1 apple id for the family to use in the iTunes and app store and a different apple id for iCloud and FaceTime and imessages?

See also Using your Apple ID for Apple services
specifically the section "Using one Apple ID for iCloud and a different Apple ID for Store Purchases".

Is there a way to find out how much I have spent on apps for the iPad?

I need to find out how much I have spent on apps for taxes. But in the app store on my iPad under the purchased tab, it lists all the apps but the prices are not available. Any suggestions?

Hi...
If you can access your iTunes account on a computer you can sign in then view your Purchase History.
And check your bank statements.

How can I have sms message delivery for IPhone

How can I have sms message delivery for IPhone

Check to see if there is a 3rd party app that provides it. Also, check with your carrier. If you are in the US, this is not an important thing, and most of the carriers do not provide delivery for SMS. If your from outside the US, see if the carrier supports it and what needs to be done to get it.

How do we have a distinct DB for production & staging?

Hi all;
We can push our cloud service up as staging or production. When we do, each needs to hit a different Sql Azure database. Otherwise our staging system will be mucking with the accounts of our users in the production system.
How can we do this?
thanks - dave
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

hi dave,
For your scenario, you may need create two SQL Azure data base for staging and production environment. You can use different Configurations file for different environment. I recommend you could refer to this similar issue (http://stackoverflow.com/questions/4328462/staging-or-production-instance/4330628#4330628).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I have user specific filters for information display on portlet?

Hello Everyone !!!!!
I am new to the Portlet World
My query is..
How can I have filters on a portlet screen ?
I want to display certain information on a portlet which must be filtered and ordered.
Example:
In Internet Banking , I want to display transfers which had happened in the last month. So I ( as a user ) will keep this predefined somewhere may be in portletData.
Whenever that user logs in for the next time, he will be able to view account transfers taken place in the lastest month only.
This must be user specific. As another user can keep the setting in a different way. That is he/she might want to view account transfers for the last week only.
When user clicks on a button a new screen( filter screen ) is loaded where he need to enter the dates of From and To .....
The user saves this.....( may be in portletdata)
So that when he logs in .. next time screen loads with the defined settings in filter....
Any idea ? How can this be achieived ?
Thanks in advance.... :-)
Wating for a reply
Message was edited by:
dev2007

Hey !!!
Can anybody give me some idea regarding this ?

How to find out name of table for a structure.

hello all,
I want to find out name of table for a structure ADDR1_DATA. can anybody pls tell me how to find out it?
Thanks,
Ashu

Hi Ashu,
You write the structure name in se11
after selecting the database table radio button
click on the where used list button in the application tool bar.
You will find the table name if it is used else where.
Check out the website at:
http://sap-idoc2edi-consulting.com/
Read the blog at:
http://blogs.ittoolbox.com/sap/ehadzipetros
Regards,
Jagadish

How do I have one version only for RAW+JPEG

I am shooting and importing RAW+JPEG, but get a separate version for each file - same as you would see in iPhoto. But in aperture I want just one version (and with the master JPEG hidden away, but available if wanted.)
How can I achieve this?

Hello! Actually after I'm importing my nef+jpg files I do see the raw file in the browser. I can get the jpg picture by command, which will be placed automatically in a stock, the raw picture as the pick. So far everything is working.
But I would prefer to get my jpg picture in the browser, and would have to command me the raw file instead, to work on it ONLY when I see on the jpg file that's worth doing it.
Aside from that I would like that the jpg picture would be automatically chosen as the pick in the stock. Is there any way that this two behaviors can be changed?

How can I have several arrange tracks for one instrument mute independently

hi... if i create several arrange tracks with the 'New with same channel strip/instrument' command i cant mute them in the arrange window independently it seems ? For example i want 10 arrange tracks all playing the same Battery Kit/instance but be able to mute them independently through automation for example. For the moment when i mute one of the tracks the whole instrument gets muted.
i'm a bit confused since i'm new to logic from cubase ... can i not just use 'midi tracks and parts' like in cubase ?

chindustronik wrote:
hi... if i create several arrange tracks with the 'New with same channel strip/instrument' command i cant mute them in the arrange window independently it seems ?
My first though was to suggest that you check Preferences>Audio>General, and make sure "Track Mute/Solo" is set to "CPU Saving (Slow response). This will allow you to mute and solo each track copy individually.
However, this will not help you in this situation, because the mute button will be muting the actual channel strip, like a mixer, so you will always be muting the whole thing.
It's easiest to simply make cuts right on the MIDI regions, and mute the regions themselves, in the spots of the song you want them muted. Either that, or mute the MIDI on/off events themselves, within the Piano Roll window.

How can I have proxy settings stay for multiple users on an educational network?

Hi,
I want to be able to have mutlple users log onto machines and haave proxy settings already set in preferences. I have tried by copying the Mozilla folder in to the All users location and does not help.
Each user logs onto a computer with a mandatory or Roaming account depending on account security. Settings for firefox are picked up from their Documents and settings folder when they log on (It is created when they log on for the first time)
Is there a way to pull across proxy settings for a new user? Ussually it would be a case of just sticking it in All Users.
Thanks

A possibility is to create a file user.js and place that file in the default template location (defaults\pref) in the Firefox program folder.
If you don't want users to change the proxy (connection) settings then you can also lock the prefs or set a different default value.
See http://kb.mozillazine.org/Locking_preferences
You can use these calls in mozilla.cfg to set or lock a pref:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
http://kb.mozillazine.org/network.proxy.type
http://kb.mozillazine.org/network.proxy.%28protocol%29
http://kb.mozillazine.org/network.proxy.%28protocol%29_port

How can I have a background image for reference ?

HI,
I need to register align horizontally and vertically) about 100 images to the first. I don't want to stack or merge them. An ideal way to accomplish this would be to be able to set the first image as a background reference image for all images in the group. There would be left/right buttons so I could advance through the stack, a slider to adjust the visibility of the foreground image, and up/down & right/left arrows so I could move the upper image a pixel at a time in any direction. In this case I don't need to rotate the image, but this would also be something a person might want to control. Then I would move through the group of images, stopping on each one to align the image to the first. One at a time, or after I am done, it would save all the aligned images to a new filename and folder, without changing the transparency of the image or in any way using the background reference image. Without rotating the images, every pixel in the new image would be the same as in the original, except moved. I would start by resizing the canvas of all the images so they have a border area. This way I can move the image around and not lose any of it.
Of course I could put the reference image in the background layer and the image to be adjusted above it on another layer. Then i can use the background as a reference by making the upper image somewhat transparent. Finially I could delete the background layer and save the image with just the adjusted layer. But this would be tedius with 100 images, even worse if there were 1000..
Is there a reference background image capability in Photoshop CC ? Is there a better or different way to do this ? Or can Bridge do it ?

When I first posted this I had selected Photoshop as the community. After it had posted I saw it had changed and again changed it back to Photoshop. it again reset it to Premier Pro. I don't know why. Also, I had selected Refrence image as a tag and that keeps dissappearing. Even worse, there are no replies. What's the deal ?

How can I have a VMWare repository for add-ons

I have a virtual environment and need to be able to put add-ons/extensions in one shared directory so all my clients can access them. I do not want the users to have to install them. Is there anyway to do this?

You're welcome. Could you mark the problem as solved, that along with the comment you already made helps other users with similar problems find aspects of Firefox and try things out for themselves, Thanks.

How do i have preview use outlook for mail as my primary email?

i am usning Preview on my MacBook Air, when ever i try to mail a documenet or a pdf in outlook, te Mail stamp jumps up which i do not use. My primary and only email sysmtem that i want to use is Outlook. can anyone suggest how to find where i can place the needied setting?
Thanks Joey

Mail>Preferences>General. Change the default mail application to what you want.

How can I have different access control for the guest network (different than the main network)?

I am trying to control my main wireless network with access control via mac id with no password. I wanted a separate guest network with password access and no access control. However, the only way that the guest network works is if I specify unlimited access as the default. Is what I am trying to do possible.

I am trying to control my main wireless network with access control via mac id with no password.
Definitely not a recommended method for security. MAC addresses are easily cloned by anyone who wants to do so with free tools available on the Internet. An unwanted guest will be on your network in less than a minute if they want to be.
Strongly recommend that you use WPA2 Personal security with a non-dictionary password to protect your network.
I wanted a separate guest network with password access and no access control. However, the only way that the guest network works is if I specify unlimited access as the default. Is what I am trying to do possible.
Unfortunately, Apple does not allow separate Access Control for the "main" and "guest" networks. It's all or nothing, I am afraid.
Likely, the "best" way to set up Access Control is change the default rule to No Access, Then you will need to enter in the details for every device that you want to allow to connect for both the "main" and "guest" networks with the time limits for each device.

How Do I have to Make Mesh for Small Structures in MWO?

Similar Messages

Maybe you are looking for