How do I hear all audio tracks in multiclip at once?

Working in Final Cut 5. I've set up a multiclip with three angles and everything is running fine. However, in my sequence, I want to have all six audio tracks active at the same time, and then use the multi clip to cut the video. How do I do this without having to lay each one back in?

I'm interested in this as well. Any thoughts out there?

Similar Messages

  • How can I use ALL audio tracks in multiclip editing?

    I want to be able to use all audio tracks after the multiclip cut.
    It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
    Is this possible in multiclip editing? And how does one go about it?
    Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
    All ears,
    Ben

    Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
    Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
    bogiesan

  • Can only hear 1 audio track?

    I,m new to Elements 10 and have just started editing. I just dragged a clip onto my timeline but can only hear one audio channel. I know there are two tracks, how can I mix both through?
    thanks.  Darrell

    Hi Steve,  thanks for your help. but this has really got me beat. When I play the track straight off my computer I hear all audio tracks. But then I “get media”  bring the clip in and listen off the elements timeline – I only hear track one???
    So my computer must be fine?
    When you say “Can I see both right and left channel in the wave form? Its hard to tell – am I meant to be looking at the “green strip “ on the timeline?  Its so very small.  - I see a yellow line and a grey line underneath?  what am I looking at.  Its very frustrating because I am trying to edit a friends concert  and the music is on track one – but the atmos and applause is on the other 3 tracks – but all I can hear is the music
    any suggestions?
    cheers mate
    Darrell Brown
    0418-954-858
    [email protected]

  • Removing ALL audio tracks in a project

    How do I remove ALL audio recorded in a .cp? I don't mean how
    to compile w/o audio, I want to delete all tracks. I'd rather not
    go through each slide and click each object and remove the audio
    associated w/ it. I have lot's of audio that I want to get rid of.
    Thanks.

    Audio>>Advanced Audio

  • How to not overlap two audio tracks?

    Hi, I use Adobe Premiere and I recently I had a problem with Action! (a video recording program) if you register the microphone and the stereo, Premiere overlaps the two audio and is not making me hear my microphone. I also tried to click the check mark on recording program (split audio tracks) but Premiere not divides. How can I create two audio tracks divided on the same record?

    Are you saying that if you walk up to your Mac, iTunes suddenly opens? 
    At any rate, you should be using two different accounts on the Mac, each of you logging into your respective accounts, if you don't want common syncing.

  • Channel strip plugin setting attaches to all audio tracks -- why

    Hi all, an interesting thing happened today. Put down bass/drum/rhythm guitar trax. Rhythm guitar used a NI Guitar Rig 3 plugin -- a Vox amp with spring reverb.
    So far, all is well.
    Then I create a new audio track, for the lead guitar. Much to my surprise, it took on the settings of the rhythm guitar track -- the NI GR3 Vox amp with spring reverb.
    I tried clearing the channel trip settings. I tried bypassing the plugin in the rhythm track. I created new audio tracks.
    All to no avail -- all audio tracks retained the settings of that first track, that is Vox with reverb.
    I finalyl created a new project and moved my tracks over. All is fine now, but does anyone know what might have caused that? And how to avoid in future?
    I really enjoy Logic, but I have to wrestle with fear every time I open it -- a "what the f's gonna go wrong this time?" sorta feeling. I've started pricing out Pro Tools systems to be honest...

    It sounds like you don't understand the concept of Logic - tracks and track objects.
    You can have for instance twenty tracks, all set to an Audio Channel 1 object. The tracks themselves are independent, but all audio plays through that Audio Channel 1. This is great for, for eaxmple, comping up a vocal part. Note that audio channels are themselves monophonic, so you can have only one audio region playing at any one time.
    This is different to independant arrange tracks that play through different audio channels..
    So when you hit your "next track" key command, make sure you are using "Create Track with next object", and not "Create Track". Create Track just creates a new arrange track assigned to the same track object. The other one creates a new arrange track and assigns the next track object, so everything's fully independent.
    This is a complexity in Logic that other DAWs don't have, but it's a great feature once you get your head around it. One reason I like Logic over other DAWs.
    So arrange tracks and audio channels are not inextricably linked, as they are in other DAWs.

  • Move all audio track anchors at one time together

    Move all audio track anchors at one time together..is this possible? I imported a remix, figured out the tempo. Now I want to make the tracks ( regions) all start on a downbeat to align with my measures..thx in advance for your assistance..

    > How do you do that?
    I'd begin by reading the Beat Mapping Track section in the Reference manual, p. 337...
    > They are not referencing anything.
    Oh, yes, they are: these anchors actually reference the first sample to be played... Presumably, they were recorded to start together and play along, right? When you dragged them, they all landed as new audio regions starting at the beginning of the same bar, since their respective anchors are all aligned at the start of the so-called region. These anchors will stick to the tick they landed to, whatever tempo change you make, unless you move the regions.
    Or maybe you're missing something?...

  • How do i mute an audio track without deleting it.

    how do i mute an audio track without deleting it?

    There have been a few recent posts, where Audio Mixer settings are not "held," in PrE 11. Those cited problems seem to be Project-specific, in that Audio Mixer works, as expected, in a new Project - just not the one, causing issues.
    I do not know if there is a glitch/Bug in Audio Mixer, or if the users are doing something that is "disconnecting" Audio Mixer in some way.
    As a test, create a New Project, Import a Video file with Audio (Muxed Video Stream and Audio Stream), and test Audio Mixer, and the Mute function there. How does Audio Mixer work in that Project? Does the Muting of the Audio "stick?"
    Second test: in your existing Project, Select all the Clips on that Audio Track #1, and drag them to Audio Track #2, or another, empty Audio Track, and test the Mute for that new Track, in Audio Mixer. How does that work for you? Does the Mute stick?
    Good luck,
    Hunt

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • How do I play all the tracks ?

    How do I play all the tracks in track view?  I did it once and am unable to do it again.  It only plays the 1 track I am working on and not the entire song.  I am using garage band on an iphone5

    Hi
    gary.studio wrote:
    Surely I can change the tracks to route through the computer sounds directly rather that going via the keyboard?
    Sure
    The quickest way would be to make new (Internal) Software Instrument tracks and to copy any MIDI regions across to those tracks
    CCT

  • HT1473 i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?i've been trying to import

    i've been trying to import a cd into itunes that has different artists on the cd. (queen of the damned soundtrack) after its done, all the tracks aren't together. its all sepreated. how can i keep all the tracks together?

    Happens all the time and you are probably correct about cause.
    Some CD manufacturers use various forms of copy protection on discs designed to interfere with computers reading the discs. I have found iTunes to be very picky about this too. I have had several discs iTunes would not acknowledge but could rip with another program. Other times the fix is as simple as cleaning the disc ro turning on error correction for the ripping process.
    Message was edited by: camoracer

  • How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    Binbashi
    You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
    To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
    You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
    If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
    Looking forward to learning of your results.
    Thank you.
    ATR

  • I can not hear the audio tracks in iMovie

    I can not hear the audio tracks in iMovie 10.0.1.
    Can anyone help me?

    Have a look in Utilities > Audio Midi Setup

  • Premiere not showing all audio tracks in video file?

    Hello,
    The short version of my issue is that I am not seeing all audio tracks in my imported AVI video. I know they are there, but only one track is showing.
    Longer version:
    I have an application called Action! that is used for recording games. There is a setting on this application that allows you to record your microphone as a separate audio track.  I made a 15 minute video using this. If i play this video in Action!'s media player, i can switch between my game track and my microphone track. If I play the video file in Windows Media Player, it plays both tracks. When I import this video file into Premiere (or Soundbooth) it only shows the Game track and not the microphone track. I cannot find a way to get to the microphone track. It just seems like it doesnt exist. Any thoughts?
    Thanks in advance

    music from library on drive/aiff

  • How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
    Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
    Here is a good Tutorial.
    If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

Maybe you are looking for