How do I hide an indicator if the value from a 1D array is outside set limits

I have a simple system which takes readings during a lab test from a number of thermocouples. The number varies for each different test and those that aren't used are left dis-connected. I would like my VI to blank off the indicators which aren't used automatically. This could be done by blanking off all inidcators with values above 1000 as the value on screen with no thermocouple connected is 1262. I would like to know how to do this. My system used the sample channel VI to output a 1D array to a digital indicator. I am aware of the hide indicator VI that is available, however that requires a boolean input and I do not know how to convert. Any help would be appreciated.

You can use comparison functions, that will give you a boolean answer, for example, you can wire equal to function, to a value, wire 1262 to the other input and if equal it will answer TRUE, if not FALSE.
Hope this helps

Similar Messages

  • How can I hide or make visible the fields at the order and at the delivery?

    How can I hide or make visible the fields at the order and at the delivery?
    Thanks in advance.

    Hi,
    For sales order, use user exit :
    MV45AFZZ and FORM userexit_field_modification.
    For deliveries, use BADI :
    LE_SHP_DELIVERY_PROC (see with Tcode SE18) and method CHANGE_FIELD_ATTRIBUTES.
    Create implementation in ref to this badi with Tcode SE19.
    Regards,
    Lionel

  • How do I hide a clip in the timeline?

    How do I hide a clip in the timeline?  In the old version, at the far left of the timeline, there was a green button with a filmstrip icon. Clicking that toggled the clip on and off to let me see the clip below it.  Where is that button now?
    FCP X 10.1.1
    Mac OS 10.9.1
    iMac 3.2 Ghz Intel Core i5
    shoe size 10.5

    I have the full version of FCP-X on a new Mac.  I still have my old FCP-6 on my old Mac.
    I have something in FCP-X that looks like rows (tracks) in the timeline.  I have several clips that form a horizontal line and directly under that is another horizontal row of clips.  I call them rows or tracks.  Maybe that is not the correct term.  I just tried to create additional rows, and created six tracks (horizontal rows) each containing multiple clips.  FCP plays only the top clip, which is the same as the old version.
    I have found a way to disable a single clip, but what I want to do, and it was as easy as pressing the green button in FCP-6, is to temporarily disable the entire row of clips.
    Often I have multiple cameras shooting the same event.  I want to quickly disable one camera view and see the one below it.  If the video is chopped up into small segments, then It would take too long to disable each clip individually. 
    I wish they would have kept the old features when they upgrade the software.

  • How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

    How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

    You don't have to shut down the computer to switch accounts. All you do is click the Apple symbol in the upper left and choose Log Out and that's it. You can also set up Faster User Switching by:
    1. Open System Preferences - Accounts
    2. Click Login Options
    3. Check the box called "Show fast user switching menu as" then choose from either icon, short name or name.
    Then when someone wants to switch users they can. The advantage of this method is if you are have a document open and don't want to close it the document will remain open. If the other user attempts to shut down the computer they can't until you have logged out thereby saving all your data.
    A very simple and elegant solution.

  • How to get the values from table SKB1 R/3  to SRM

    Hi Gurus,
    My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
    Like wise I have many tables for doing validation in SRM
    Help me how to get this, suggest me any Function module with sample code.
    OR
    Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
    Suggest me.
    Regards
    Paul

    Hi,
    You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
    Which SRM / Backend system version are you using ?
    Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
    See related links ->
    Re: Retrieving data from R/3 into SRM
    Re: Product Search TIME lag
    Else you can just call the remote enabled  FM "BAPI_GL_ACC_GETDETAIL"  from SRM.
    BR,
    Disha.
    Do reward points for useufl answers.

  • How to get the values from popup window to mainwindow

    HI all,
       I want to get the details from popup window.
          i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
       now i am able to display popup window with values.How to get the values from popup window now.
       I can anybody explain me clearly.
    Thanks&Regards
    kranthi

    Hi Kranthi,
    Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
    Regards,
    Uday

  • How to get the values from a html form embedded in a swing container

    Hi all,
    I am developing an application in which i have to read a html file and display it in a swing container.That task i made it with the help of a tool.But now i want to get the values from that page.ie when the submit button is clicked all the values of that form should be retrived by a servlet/standalone application.I don't know how to proceed further.Any help in this regard will be very greatful
    Thanks in advance,
    Prakash

    By parsing the HTML.

  • From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    Hi,
    Use NVL or COALESCE:
    NVL (col_a, col_b)
    Returns col_a if col_a is not NULL; otherwise, it returns col_b.
    Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
    For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • How to create a dropdown list to list the values from two different tables?

    Hi,
    I have the following requirement:
    1. I have to create a dropdown list to display all the values from the second column of  a table.
    2. Another dropdown list to display all the values from the second column of another table.
    3. A text box should help me to add the selected values.
    How to get this done in a PDF? Please help.
    Regards,
    Latha

    Is this a LC form? Because Acrobat forms have no concept of tables, just
    individual fields...

  • How can I get iTunes to display the tracks from a CD in their original (album) order?

    To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
    How can I get iTunes to display the tracks from a CD in their original (album) order?
    It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
    Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
    Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
    Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
    As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
    These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
    Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
    Frustratedly yours
    Alan Whitaker
    PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

    Dear Mike
    Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
    My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
    I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
    Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
    In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
    Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
    Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
    I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
    Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
    Anyway thanks again. At least I know that it is not just me
    alanfromthatcham

  • How to get the value from a JavaScript and send the same to Java file?

    Hi.
    How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
    Thanks and regards,
    Leslie V

    Yes, I am trying with web application.
    In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
    How to send this 'message' with and to the 'request'?
    Thanks for the help :-)
    The actual JS code is:
    function productdeselection()
    var i=0;
    var j=0;
    var deselectedproduct = new Array(5);
    var message = "Are you sure to delete Product ";
    mvi=document.forms[0].MVI;
    mei=document.forms[0].MEI;
    lpi=document.forms[0].LPI;
    if(null != mvi)
    ++i;
    if(null != mei )
    ++i;
    if(null != lpi)
    ++i;
    if(null != mvi && mvi.checked)
    deselectedproduct[++j]="MVI?";
    if(null != mei && mei.checked)
    deselectedproduct[++j]="GAP?";
    if(null != lpi && lpi.checked)
    deselectedproduct[++j]="LPI?";
    if( 0!=j)
    if(i!=j)
    for (x=0; x<deselectedproduct.length; x++)
    if(null != deselectedproduct[x])
    message =message+ "-" +deselectedproduct[x];
    alert(message);
    else
    //alert(" You cannot remove all products!");
    return false;
    return true;
    }

  • How to get the value from databank

    Hi,
    How to get the value from databank? and how to set the same value to visual script object?
    thanks,
    ra

    Hi,
    You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
    You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
    This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
    Thanks
    Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • How to get the values from the resultset???

    I have a problem with this code given below,
    i am executing an sql query which return a union of values from two tables.
    the problem here is how do i read the values from the resultset.
    here is the code....
    package com.webserver;
    import java.sql.*;
    public class UnionDemo{
    public static void main(String args[]){
    Connection connection =null;
    Statement statement =null;
    ResultSet rs =null;
    try{
    DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
    connection = DriverManager.getConnection("jdbc:oracle:thin:@:1521:ORCL","scott","tiger");
    statement = con.createStatement();
    rs = statement.executeQuery("(select tablename from node where appid=432) union (select tablename from uomnode where appid=432)");
    ResultSetMetaData rsmd = rs.getMetaData();
    int numberOfColumns = rsmd.getColumnCount();
    while (rs.next()){
    System.out.println(rs.getString(1));
    // instead of rs.getString(1) I also used rs.getString("tablename") but of no success....
    }//end of while
    }catch(Exception exp){
    exp.printStackTrace();
    finally{
    try{
    if (rs!=null) rs.close();
    if (statement!=null) statement.close();
    if (con!=null) con.close();
    }catch(Exception exp1){
    exp1.printStackTrace();
    }//end of finally
    }//end of main
    }//end of class
    when i execute this program i get an oracle error ORA-01009
    which says (java.sql.SQLException: ORA-01009: missing mandatory parameter)
    can anyone help to retrieve the values from this resultset...
    thanx

    [cut]
    i am executing an sql query which return a union of
    values from two tables.
    the problem here is how do i read the values from the
    resultset.[cut]
    When the error occours?
    1) Executing query ?
    2) Retrieving the field from the resultSet ?
    3) ecc. ?
    BTW, first of all, try to execute the query removing the parenthesis
    of the two select statement. I know that there are some problem
    with the oracle jdbc driver about them.
    Hope it helps.

  • How to get the value from select list to text box

    Hi,
    I have a select list i want to retrieve the value from select list to text box.
    How can i do that???
    Regards,
    Sakthi.

    Hi Sakthi,
    Yo can use the Java script for that..
    Dynamically the value will come into text box.
    Use the below script.
    <script type="text/javascript">
    function disFormItems()
    var lReturn = $v(here your select list name)
    alert(lReturn);
    document.getElementById(here your text box name).value =lReturn; }
    </script>Cheers,
    Shan

Maybe you are looking for