How do i hide urls in the address bar

hi can u tell me how to hide urls in the address bar or to encrypt it
thanks

Ok how do you do that without using a popupWhat popup?didn't you see watercolours post about popups? i think you need to reread the thread ....

Similar Messages

  • Why in address bar in not the url but "go to the web site"? How can I see url in the address bar?

    Why in the address bar is not URL but "go to the web site"? How can I see the URL in the address bar?

    those are some addons that other users have reported to cause the same problem in the past: Gom player, Ask Toolbar, DivX (Plus) Web Player, RealPlayer Browser Record Plugin...
    in case you have one of them present, try to disable/remove it - otherwise you could disable all your extensions & reenable them one by one (a restart of the browser might be necessary after each step) until you find the culprit.

  • How can I add more than five URLs to the address bar drop down list?

    How many URLs can the Awesome Bar hold in the drop down list? I was showing five, but when I tried to add a sixth by cutting and pasting the URL in the address bar and clicking "Enter", it did not show up. Can the Awesome Bar hold more than five?

    It is possible that you have an extension that sets this value to a lower setting than the current default of 12.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Since switching to Firefox 4 I'm unable to access a web page by pressing "Enter" after typing the url in the address bar; I now have to click on the bar; how do I change things so that I can go back to a keyboard shortcut?

    I use keyboard shortcuts whenever possible but since updating to Firefox 4 I can no longer access a web page simply by pressing "Enter" after typing the url in the address bar. Can I get back to this useful shortcut somehow and avoid having to fiddle with a mouse?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    * [[Troubleshooting extensions and themes]]

  • Why is it that now, when I click on a link for a website I've saved, it does NOT show the URL in the address bar? I can't drag it to an email to share the link.

    Why is it that in these newer versions of Firefox (I have 21.0), when I open a link that I've saved, it does NOT display the URL in the address bar any more?
    I can't drag and drop the link into an email, and I can't see the actual web address I'm connected to for reference OR for security purposes. Why was this changed?
    It becomes necessary to reveal the properties of the URL link I've saved, using the Windows "Properties", then copying and pasting the URL into the Firefox address bar, before I can do anything with it.

    No changes have been made and no problem with extensions has interfered with the URL appearing in Firefox before. Only with the last few new versions of Firefox has this cropped up. Also, the link opens correctly - it just doesn't display the URL in the address bar, instead it just reads (in gray) "Search or enter address." How could another extension interfere if Firefox is the sole program associated with .htm, .html files?

  • Can not copy a URL from the address bar/line

    Why is it proving so difficult for me to copy a URL from the address bar using Safari?  When I click on the link I want to copy, it does not highlight.  I have used Command L and Command C, and that works but there has to be a simpler way.  I also read that if I click the address bar once, then press the control key and click on it again that a menu would appear with cut, paste, copy.  That does happen, but all options are greyed out, and not selectable.  Another google search resulted in someone saying there was a button or arrow to click on and that this tool would copy the URL.
    The URL I am copying is very long, longer that the address bar window
    What Gives Here?

    Click the icon (favicon) to the left of the URL.
    That will select the entire URL.
    Command C will copy the URL.

  • Safari close immediately every i enter the URL into the address bar

    please help my safari always close if i enter the url into the address bar, but if i used another account in my computer it works. what should i do ?

    There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
    *[[/questions/955140]] why is the 20.0 address bar unresponsive?
    This is currently investigated and tracked via this bug report.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
    <i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

  • How do I un-hide the FULL url in the address bar?

    I WANT to be able to see ALL of the URL and address in the address bar! You changed it so the address is hidden or darkened without any option to see it clearly without highlighting it. Making vision impaired people blind to things such as what area of the site they are on and https:// vs http:// This is annoying and wrong. How do I change it back without a retro back to FF 3.6?

    Hiding of the http: part<br>
    <br>
    The protocol (http://) has been removed from the URL in the location bar for http:// pages only. https:// pages will still have the protocol. There's also a known bug where if you copy the URL after selecting it from the awesome bar dropdown (but before loading the page), it won't include the http:// part. Users can revert to the old behavior by setting '''browser.urlbar.trimURLs''' to '''false''' in '''about:config'''.<br>
    <br>
    Urlbar highlighting<br>
    <br>
    This is a feature in Firefox to highlight the domain in the URL bar. Other parts will become grey. You can change a preference to make the entire URL dark. Users can revert to the old behavior by setting '''browser.urlbar.formatting.enabled''' to '''false''' in '''about:config'''.<br>
    <br>
    To change this preference:<br>
    <br>
    type about:config in the Location/URL bar and press Enter.<br>
    if you see a warning, accept (promise to be careful)<br>
    Filter: browser.urlbar.formatting.enabled<br>
    in lower panel, double-click that item to toggle value to false<br>

  • How do I copy and paste the address bar and have it show as an 'url'? It copies as black type and not as a link.

    When I copy and paste the address bar it doesn't show as a blue link in the pasted document. I also have Internet Explorer and it works fine. Do I have a setting on firefox that needs changing?

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden.<br />
    You can make the Menu bar visible via View > Toolbars, also accessible via Firefox > Options.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    * View > Toolbars : [X] Menu Bar

  • Deleting urls in the address bar?

    please excuse me if i am posting my question in the wrong forum.
    How do i delete urls that appear in my address bar?
    thanks, in advance
    Ryan

    Hello Ryan and Welcome to Apple Discussion.
    if you are asking about deleting a url in Safari, then you are in the wrong forum you should be in Apple Safari Discussions However, it is understandable to get disoriented in the forums.
    To answer your question (if Safari), click in the address bar on the little icon on the far left of the url. in some urls it may look like the default "world" or it may have some other icon there. it will select the enitre addres even the stuff that may not be visible. then just click delete or start typing the new url.

  • In FF5, you cannot see the URL in the address bar. WHY?

    I'm viewing a web page. Then, I look at the address bar and there is a faint instruction to "Go to a Web Site." Where is the URL of the page I am viewing? This is critical for a developer!
    I am on Windows 7 (64-bit) on an Intel Core i7-2600 (3.4GHz) by Dell. Firefox 5.0.1.
    (I have other problems which I'll attack later.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • In Firefox 4, why are the website icons not appearing in the tabs and next to the URL in the address bar? They appear fine in the bookmarks menu.

    The little favicons that represent the website show up as the blank page icon in the toolbar and in the address bar, but they appear fine in the bookmarks bar. I have tried clearing my cache, and that did not help.

    The little favicons that represent the website show up as the blank page icon in the toolbar and in the address bar, but they appear fine in the bookmarks bar. I have tried clearing my cache, and that did not help.

  • How can I see the entire url in the address bar in Mountain Lion including the http or https?

    I recently updated Safari and now when the url of the site I am visiting shows up in the adress bar...it is minus the http or https so I am unaware fo whether the site is secure or not. How can I enable Safari to show me the entire url each and everytime I visit a webpage? Like before??

    Users can revert to the old behavior by setting '''browser.urlbar.trimURLs''' to '''false''' in '''about:config'''.<br>
    <br>
    <br>
    To change this preference:<br>
    <br>
    type about:config in the Location/URL bar and press Enter.<br>
    if you see a warning, accept (promise to be careful)<br>
    Filter: browser.urlbar.trimURLs<br>
    in lower panel, double-click that item to toggle value to false<br>

  • Safari won't display any URLs in the address bar. When I type it in, it'll keep what I typed in, but never change no matter how many links I click.

    This makes it really hard to refresh pages. I might be on google, looking something up, hit refresh, and my URL is still showing "facebook.com" or whatever site I was on previously, then I get taken back to the site I had in my URL. When I click around on links on the page I'm on, it'll still just show the url to the first page I viewed. Also, the URL isn't auto-completing as I type in URLs.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in to the account that has the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
    In safe mode, test again. Same problem(s) now?
    After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

  • How do I hide names from the Address fields?

    here's the problem.
    a group of peers is exchanging emails using the Reply All function. the catch? we need to keep our names out of the Address Fields. if I enter my friend's name into Address Book, Mail insists on showing the full name in the Address Field.
    is there any way to insert only the email address without the name of the recipient in the Address Fields? even when selected from the Address Book, or entered via a Group selection?
    BCC is not an option. De-selecting "When sending to a group, show all member addresses" is also not an option, because I would assume that recipients will not be able to Reply All.
    I tried entering an alias into the Email field in Address book: Alias <[email protected]>.
    any ideas?
    cheers,
    Gregory

    you can uncheck the option to auto complete addresses in Mail preferences->composing. then you can enter the addresses by hand without full names. the addresses will still show of course. or you can create double vcards for people in question in address book that have just email addresses but no names. then Mail will let you choose those.

Maybe you are looking for

  • Problem with Creative Zen Vision

    ok, I just got this thing. i plugged it into my computer but the battery charging screen never appeared. So i unplugged it and i noticed the top light remains on no matter what. I tried turning it on, but the screen stays blank. I tried resetting it,

  • Adding custom field in shopping cart transaction

    Hello, I have done the following things apart from enhancing the INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC structures. 1) Executed BBP_DYNPROS_GENERATE for SAPLBBP_PDH_SEARCH and SAPLBBP_PDH_CUF 2) As I realised later that CI_BBP_ITEM_SC and C

  • Posture for MAC OS X

    Can someone help me in understanding if ISE can do posture assessment for MAC OSX for File Condition, Service Condition Or checking any application running? I could only find Posture checking for AV/AS for MAC OSX. Is any possibility, if ISE can do t

  • Error with XCode

    Hey there, I just got the following error message in XCode: Uncaught Exception: * -[XCActionManager buildAndGo:]: unrecognized selector sent to instance 0x2883bf0 Stack Backtrace: The stack backtrace has been logged to the console. I think is is rela

  • Simple Question Calling methods from Java files through JSP without JVM

    Hi. I've got a simple question (forigve my newbieness)... If I'm running Tomcat can I exectue a method in a compiled Java file from a JSP page without having the JVM installed on the server? Any thoughts or additional comments would be appreciated. M