How do I identify a new type of virus?
This may not be a Firefox 4 problem specifically, but I was advised in another forum to post it here:
Recently I got hit by the FakeRean virus that I downloaded via Firefox 4 Beta 6. The mechanism is that the web site opens a global modal dialog offering to play a video, but instead installs a virus. In most cases I can recognize this as an attack, and the solution is to open Task Manager and terminate Firefox. Because the attack uses a global modal dialog, all other features of Firefox are disabled. However, if you're not thinking quick, sometimes you click the dialog by mistake instead of terminating Firefox.
Mozilla are actively working on this vector in Firefox 4, and hope to have a solution for the global modal dialog problem before the final release of Firefox 4.
Windows Security Essentials was able to identify it pretty quickly as FakeRean, but was not able to block it. Also, after running a scan and removing some occurrences of the virus, the virus was still able to propagate to other places. I scanned my computer 3 or 4 times without resolving the problem. Finally I downloaded and installed Windows Defender and had it scan a few time. For a while I had both Security Essentials and Windows Defender scanning at the same time. Finally after a day and a half I seemed to have gotten rid of the virus, but it took a great many scans by two applications to resolve the problem.
More recently I have encountered a similar, but far more nasty virus. It as the same behavior of many of the 'fake' security software viruses, it claims you have a virus, and prompts you to scan. It uses a combination of pop-up windows, system tray warnings, etc., although not quite as annoying as the FakeRean I had before. The nasty part is any time you try to run your security software, Security Essentials or Windows Defender, it intercepts them saying they are infected, so you cannot run them. Also, it seems to be smart enough to detect when you go to a web site to download security software and blocks that too. After several hours of trying I was not able to run any currently installed security software, or download and install any new security software. I probably could have found a few other things to try, but I had performed a full system backup the day before, so I simply booted my Windows Setup DVD and restored the last image backup - which seemed to solve the problem. A subsequent scan by Security Essentials found nothing.
This recent virus was also installed via Firefox 4, but beta 7 this time. I think I may have clicked on some dialog to activate it, but it was not too clear. Also, the attack site(s) seem to try installing a Firefox plug-in, but I never confirmed the request to install.
After restoring my system image, I ran into the same problem again via Firefox 4 beta 7 and picked up the virus from some web site, but this time I was being really careful to not click any dialogs or confirm any actions, so something more devious was going on as I picked up exactly the same virus, but a different way. Again, just restored my last backed up image and my system is clear of the virus again.
I can't say that Firefox 4 is specifically the problem because I have not tried other browsers on the same web sites, but these new attack sites seem to be getting more devious at getting around the security features in browsers. Also, they have no problem getting through Windows Security Essentials even when active protection is enabled.
Anyway, does this particular virus have a name? It would probably be 'fake' something.
Can anyone think of any way to identify the virus? I might try leaving Security Essentials open next time I go web browsing and see if that helps.
Can anyone think of any other ways to combat this virus, short of restoring the last system image backup?
Cheers, Eric
If you have the application then it is in your Applications folder. Locate it then double-click on the icon. It's that easy. If you need to download it, then go here: Adobe Reader 11.0.09. The download will be a disc image file - has an extension of ".dmg." Normally, the download is in your Downloads folder or on your Desktop. Locate the .dmg file and double-click on it to mount the image on your Desktop. There will be an installer inside the mounted disc image. Double-click on the installer and follow the directions to install it on your computer.
Similar Messages
-
How do I identify the 'new' MacBook?
I am shortly in the market for a basic MacBook (2 GHz model is OK) to complement my current iMac. I heard that Apple has recently upgraded the MacBooks with new chip architecture, glossy screen, etc., but they look very similar to the old, and I am not very familiar with either.
My question is: when I go into a store to purchase one, how can I tell whether the product on offer is the new version or the older version? Except in Apple stores (none anywhere close to where I live), the sales staff isn't all that Mac-savvy, so it's "buyer beware". Buying on-line would be even more difficult, as I would not be able to see the item or ask pertinent questions: I hope not to have to go this route.
Thanks.You could also ask them what type of graphics-chipset is installed in the MacBook in question...
previous models of MacBooks come equipped with the *Intel GMA 950*
whereas the more recent Santa Rosa MacBook comes with the newly improved (?!)
*Intel GMA X3100* integrated "graphics processor with 144 MB of DDR2 SDRAM shared with main memory"
You can also check out this link for more differences between the MB06xLL/A (mid 2007) and the MB06xLL/B (late 2007) MacBooks:
http://www.everymac.com/systems/apple/macbook/faq/differences-between-macbook-la te-2007-santa-rosa-mid-2007-core-2-duo.html
hope this helps...
blue skies, -
I got a message from a friend I haven't talked to in years this morning, saying nothing but
" {hi} Vee! {mess} {links}/{folder}/[Removed for privacy] "
after which he promptly went offline again.
Now, I'm guessing I'm seeing the hyphenated stuff because I have emoticons turned off. But the {links}/{folder}/[Removed for privacy] thing is a clickable link ending with my own username, so it seems to be an internally used URL for skype. Alt text leads to {urls.txt} It seems fishy to me and I thought I'd put out the message just in case. A google search led me here but to a deleted topic. Ergo, here it is again.This is a widespread issue. http://community.skype.com/t5/Security-Privacy-Trust-and/Spoofed-message-from-contact/m-p/4035082#M47608
-
In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library).
We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform. Is there any way to create a list item with specific content
type? Even if I could just input a string into that field instead of using this blank drop-down. Please help!Hi Sarah,
According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
How did you create the content type?
Please check if the content type is added to the list/library the workflow associated with.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
How can I add a new entry for determining a requirement type
Dear Friends,
How can I add a new entry for determining a requirement type
via Item Category + MRP type, I see no new entries selection.
This is in Avb Check & TOR-> TOR-> Determination of req type using transaction.
Please help.
Regards
Ravi.Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
Just one node above?
Never mind, you need to add entry on item category:S -
How do I identify and get the playlists to migrate to my new computer?
I have an external harddrive with all my ITunes playlists on it. The library migrated OK. How do I identify the playlists and get them to migrate to my new computer???
You would have had a quicker response if you had posted in the iTunes forum.
You need to copy the iTunes folder, the one at the top not the iTunes Music library folder to your new computer to move your playlists. -
How to add support for new file type.
Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
Thank youBrian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
I have done this but still not able to recognize the new file type.
At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
extension.xml
<?xml version="1.0" encoding="windows-1252" ?>
<extension xmlns="http://jcp.org/jsr/198/extension-manifest"
id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
<name rskey="EXTENSION_NAME">My Code Editor</name>
<owner rskey="EXTENSION_OWNER">Me</owner>
<dependencies>
<import version="10.1.3">oracle.jdeveloper</import>
</dependencies>
<hooks>
<jdeveloper-hook>
<addins>
<addin>teisaacs.jdev.myext.MyEditorAddin</addin>
</addins>
</jdeveloper-hook>
<feature-hook>
<description>My Code Editor</description>
<optional>true</optional>
</feature-hook>
<document-hook>
<documents>
<by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
<suffix>my</suffix>
<suffix>MY</suffix>
</by-suffix>
</documents>
</document-hook>
<editor-hook>
<editors>
<editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
<name rskey="EXTENSION_NAME">My Editor</name>
</editor>
<mappings>
<mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">
<open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
preferred="true"/>
<open-with editor-class="javax.ide.editor.CodeEditor"/>
</mapping>
</mappings>
</editors>
</editor-hook>
</hooks>
</extension>
public class MyAddin implements Addin {
public static final String MY_EXTENSION = "my";
public void initialize() {
System.out.println("MyEditor Constructor");
new MyLanguageModule();
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
}I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
Todd -
How do I add a new Support Identifier to My Oracle Support?
I have one support identifier shown for my company. I need add a second but the number is not recognized. The number is correct. Is it possible to have more than 1 in My Oracle Support? Even if I delete the other identifier the new one I need to add is not found.
thanks for your help!
DawnHello rmoff,
Here are the steps for adding a Support identifier to your My Oracle Support (MOS) Account:
Once in MOS:
Go to More / Settings tab
Select My Account (left hand side menu)
In the Support Identifiers region, click on the Request Access button
Enter the Support Identifier you want to add. Provide a justification if need be and click the Request Access button
Your request will be sent to your Company's Customer User Administrator who will approve your request and grant you necessary privileges
Let me know if you have questions.
Mirella -
How to identify the file type in a safe way
I need to identify the filetype of a file in my disc.
I watched over internet and i've found this good site:
http://filext.com/
that supplys the "magic bytes" for many kind of files.
I have also looked over internet for some ready class that identify different file types, and I have found FFident:
http://schmidt.devlib.org/ffident/index.html
Do you know any other Java package/class that is able to identify correctly the file types?
Thank you,.The OS just watch the extension of the file.Not always. If you create a word doc but name it with
some other extension, the OS still can determine that
it is a word doc.On which OS?
if i take foo.exe and i rename foo.doc so my OSwill
try to open it as a MS Word Document.Again, garbage in, garbage out.What you mean?
If I create a MS Word Document for a file .doc that is not a real .doc and it is not able to read, i will just lose cpu time and a lot of memory.
So it is important to understand if I need really to open MS Word watching what is the real file type
Either way, you're going to be doing way too much
work (and wheel-reinventing) if you're going to build
your own detection scheme.In the SDK there is not any file type checker, and if eventually really exists an OS like you say that is able to read inside the file, i prefer to have my own Java class that do that work in a safe and opensource way.
However in my first post i've given a site with some java code that do what I need, i just was asking if anyone know if there is any ready-to-work java class that is better for doing this work. -
How can I capture without Firewire 400 on a new type MacPro?
I mean, Sony HDVs only have FW400, but there are no more FW400 on new type MacPros.
It means that I have to buy a AJA hardware?Do remember that Firewire ports on Mac Pro's are hub'd together. I'm no 100% sure if it the same on the new '09 Mac Pro's but certainly on the older ones. this means that if you have a FW800 drive plugged in and then plug in a FW400 drive the whole speed of both devices will drop to a FW400 speed. Even worse, if you plug a camera in sometimes hese can run at what equates to FW100 / 200 speed. Therefore your FW800 speed drive will become massively unresponsive.
So if you're planning on digitising, remember to plug the camera into one of the front ports, and the drive into a back port. that should avoid the slow down. -
How can i create a new user with only read rights ?
How can i create a new user with only read rights ?
You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null -
How can we suggest a new DBA OCE certification for very large databases?
How can we suggest a new DBA OCE certification for very large databases?
What web site, or what phone number can we call to suggest creating a VLDB OCE certification.
The largest databases that I have ever worked with barely over 1 Trillion Bytes.
Some people told me that the results of being a DBA totally change when you have a VERY LARGE DATABASE.
I could guess that maybe some of the following topics of how to configure might be on it,
* Partitioning
* parallel
* bigger block size - DSS vs OLTP
* etc
Where could I send in a recommendation?
Thanks RogerI wish there were some details about the OCE data warehousing.
Look at the topics for 1Z0-515. Assume that the 'lightweight' topics will go (like Best Practices) and that there will be more technical topics added.
Oracle Database 11g Data Warehousing Essentials | Oracle Certification Exam
Overview of Data Warehousing
Describe the benefits of a data warehouse
Describe the technical characteristics of a data warehouse
Describe the Oracle Database structures used primarily by a data warehouse
Explain the use of materialized views
Implement Database Resource Manager to control resource usage
Identify and explain the benefits provided by standard Oracle Database 11g enhancements for a data warehouse
Parallelism
Explain how the Oracle optimizer determines the degree of parallelism
Configure parallelism
Explain how parallelism and partitioning work together
Partitioning
Describe types of partitioning
Describe the benefits of partitioning
Implement partition-wise joins
Result Cache
Describe how the SQL Result Cache operates
Identify the scenarios which benefit the most from Result Set Caching
OLAP
Explain how Oracle OLAP delivers high performance
Describe how applications can access data stored in Oracle OLAP cubes
Advanced Compression
Explain the benefits provided by Advanced Compression
Explain how Advanced Compression operates
Describe how Advanced Compression interacts with other Oracle options and utilities
Data integration
Explain Oracle's overall approach to data integration
Describe the benefits provided by ODI
Differentiate the components of ODI
Create integration data flows with ODI
Ensure data quality with OWB
Explain the concept and use of real-time data integration
Describe the architecture of Oracle's data integration solutions
Data mining and analysis
Describe the components of Oracle's Data Mining option
Describe the analytical functions provided by Oracle Data Mining
Identify use cases that can benefit from Oracle Data Mining
Identify which Oracle products use Oracle Data Mining
Sizing
Properly size all resources to be used in a data warehouse configuration
Exadata
Describe the architecture of the Sun Oracle Database Machine
Describe configuration options for an Exadata Storage Server
Explain the advantages provided by the Exadata Storage Server
Best practices for performance
Employ best practices to load incremental data into a data warehouse
Employ best practices for using Oracle features to implement high performance data warehouses -
How do I identify and fix images Elements 10 believes are corrupt?
During the past three days I have had problems with the functionality of my Photoshop Elements 10 and received several messages indicating that the catalog is corrupt. How do I identify and fix images Elements 10 believes are corrupt?
Thank you for the prompt reply unfortunately the fix did not work.
Let me provide some more information that may help you diagnose this problem.
I run Elements on a PC. The operating system is Microsoft Windows 7 Home Premium. The System Type is x64-based. The processor is AMD A8-3850 APU with Radeon(tm) HD Graphics, 2900 Mhz, 4 Core(s), 4 Logical Processor(s). The Hard Drive is 1.81 TB, and 1.5 TB of this is free. The Ram is 16 GB. Everything else works great.
I have used Photoshop Elements for about 10 years, during which time I have upgraded to newer versions 5 or 6 times. I have used Elements 10 during the past 2 years. I already bought Elements 12 but I am trying to repair this issue before I upgrade to it. I have approximately 65,000 photos in my catalog. All but the last 2,000 are backed up.
During the past few days I encountered several problems with the functionality of my Elements 10; all errors provide messages indicating that the catalog is corrupt. Forexample, when I edit a photo in my catalog, the thumbnail image of the newly edited versionwill not display. When I imported new photos, the thumbnail image would not display. In all cases the photo image was replaced by a ?.
I tried to correct the thumbnail problem by repairing and optimizing the catalog. In either case I received the same message that the catalog had not been repaired/optimized because some images were corrupt. However, despite this message, the thumbnails for the newly imported photos appeared but the thumbnails for the recently edited photos still have not.
Currently, I cannot import new images, edit, delete or even stack photos. I can still view, search for, copy and delete photos. When I try to import a photo a new photo I get the following messages - ”the requested change could not be completed because the current catalog is corrupt. You can attempt a repair in the file catalog dialog." - "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types or the files are already in this Catalog." and "The catalog could not be repaired, if you have a recent catalog backup, you should restore it."
I have visually inspected the catalog and found about 25 recently imported photos that have a thumbnail image but lack the photo's id (i.e. img_3075.jpg would be replaced with ?). They are my photos from my camera and no different that the other 300 images I imported at the same time. However, these images in the catalog are blurry. When I check the image in the My Pictures folder the image is fine and properly located between img_3074.jpg and img_3076.jpg. I attempted to reconnect but received a message that there are no files to reconnect. I cannot delete the images from the catalog and If I delete them at the source (in the file folder) they still remain in the catalog view.
Howdo I identify and fix images that Elements believes are corrupt?
Thanks in advance for any thoughts. -
How can i identify Patch no ? How it is differ from patchsets no ?
Hello to all ;
I read official document it says
All patch and patch set releases carry version numbers. - patch set might be 10.2.0.2 , .... , 10.2.4.0 , 10.2.5.0
How can i identify patch number ? My DB version is 10.2.0 is , what's my patch release no ?
Thanks in advance ..Ok. Almost i got well information about patches from HERE ..
Collected information's from here :0 , If my understanding is wrong , please correct it
patches Patches are software programs for individual BUG FIXES. Oracle issues product fixes software, usually it is called as patches.
patche SetsA group of patches form a patch set. Patch sets are usually applied to upgrade oracle version. EX ( 10.2.0.1 to 10.2.0.4 )
If my DB needs patch ,I want to upgrade DB , version to Version (10.2.0.4 to 10.2.0.4)
If my oracle S/w needs patch ,A small collection of files are replaced to fix certain bugs , when aaplying patch into my oracle S/w
When applying patch/patch sets , what affected my database directly ?It depends upon patch ..
My Special thanks :0
Ok Osama , It's my final question :
I read , If i applied PSU patch , i can't apply CPU patch ( until dB upgade to new version)- What's the specific reason here ?
If someone applied a patch on my DB , how can identify what type of patch applied on my DB ? (if it is PSU or CPU)- I mean how can i identify , whether the patch was PSU or CPU ?
How can i differentiate both patches when seeing ?
Thanks Osama .. -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you
Maybe you are looking for
-
[SOLVED] wine-1.3 xorg-1.8 ati catalyst x86_64 starcraft2 black
My system: Arch x86_64,Ati radeon hd4850,wine-1.3 or latest git,Catalyst-10.7. So what i do have are these black areas displayed around game. Happens in every possible graphic tweak and setup with wine. Appears also in wine version 1.2 and it doesnt
-
Problem with LAMP permissions [SOLVED]
Alright it seems this happens every time I install LAMP server in one form or another. I cant seem to be able to edit the /srv/http folder content with my usual user account. I really don't want editing stuff as sudo all the time so I really want to
-
Transferring Songs from Computer to MP3 Pla
I bought a creative zen sleek photo last July and it always takes me awhile to put new songs on it as I have to drag and drop or to rip a CD. So I was wondering if creative had anything like itunes where you could have all of your music on your compu
-
Hello, board. I wanted to make more space on my small SDD so I followed the Lenovo guide on backing up the recovery to an external drive. Once I was done I formatted the drive and installed Windows 8 fresh and continued to install all the drivers fro
-
Is it true Creative Cloud is only needed if renting Adobe software?
I do not rent any Adobe programs. I own a copy of Adobe Acrobat Pro IX, and Elements. Since these programs are not rented; then is it correct Creative Cloud is useless here? The Apple computer I use has Creative Cloud always coming up at start up. Is