How do I import a 32gb maxwell Sandisk into Final Cut?

How do I import a 32gb maxwell Sandisk into Final Cut? I insert the sandisk into my MacBook Pro and it doesn't seem to read. The lock is off on the sandisk. I tried Log and Capture and Lag and Transfer. Any help is appreciated.
I have Final Cut Pro 7.0.3 and Mac OS X 10.6.8

Does the card show up in the Finder?
Did you set the path to the card in Log and Transfer...

Similar Messages

How do I import or export iLife music into Final Cut Pro 7. Thanks

How do I import or export iLife music into Final Cut Pro 7? Thanks.

Locate the .caf file you want to use in FCP in the Finder. Normally, iLife sound files will be in Macintosh HD/Library/Audio/Apple Loops/Apple/iLife Sound Effects/(subfolder).
Open the file on SoundTrack Pro, the go to File->Save a Copy As. In the Save As window that will open, navigate to where you want to save the file, then near the bottom of that window, use the drop-down File Format menu to choose AIFF. Set the bit depth to 16-Bit Integer and the Sampling Rate to 48000 hz.
Import the resulting AIFF file into your FCP project.
-DH

How do you import raw motion video projects into Final Cut Pro X

How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.

share, Export Movie, short cut ⌘-E
in FinalCut: Import File

How do I import an .scc caption file into final cut pro x?

I use final cut pro x. I am needing to import an .scc file for closed captioning and need to know a software compatible with FCPX that will allow me to do so. Does anybody know what I need to do?

http://www.youtube.com/watch?v=-r59sSiDBKU

How to Import AVCHD 1080/60p Files into Final Cut Pro 7?

How do I import AVCHD 1080 / 60p Files into Final Cut Pro 7? And if there is no direct way [I certainly haven't found one, but I'm no expert], what additional software would be used? I want to import the files from a Panasonic HDC-HS700 onto an Intel Mac laptop [Mac OSX 10.5.8]? Obviously I don't want to compress & compromise my footage.
I’m sure a simple, straightforward series of steps would help many people with this issue.
Thanks!

Thanks for the response!
I'm guessing you've found ClipWrap2 to be better than competing products [such as AVCHD Converter for Mac, Toast Titanium, or Voltaic].
On to the next steps. Using Clipwrap2, would I leave the checkbox "Convert Audio to LPCM" selected or deselected [and what the heck is LPCM?]. In the pulldown menu would I choose "Rewrap (Don't alter video samples)" or do I save a step by choosing "Apple ProRes 422"?
And finally, am I gaining anything by shooting 1080/60p on this Panasonic HD Camera other than a headache? [Some have suggested this is not a True 60p.]

How do I import directly from Canon XA10 with Final Cut X?

How do I import directly from Canon XA10 with Final Cut X?

I have an XA10, and importing is quite simple. But you do have to make sure your camera is set to the proper settings to allow you to import the files into FCPX.
First, make sure the camera is powered on. Connect it through the USB connection. Then open the camera's viewfinder and press the button on the side of the camera that allows you to see the videos you've shot in the viewfinder. (This toggle button toggles between seeing what the camera is pointed at live and seeing the thumbnails of the video you've already shot that are stored on the internal memory card.) Now, the camera will present you with a menu asking which memory card you want to look at (there's an internal flash memory card, plus you can insert SD cards as well). Choose the memory card on which your videos are stored within the camera, and then you'll be good to go.
Now you can go into your FCPX event and do the Import from Camera. Now the Import from Camera interface will open up and you'll be able to select the XA10, where it will present you with all the videos that are on the camera's memory card that you selected.
From here, you can select individual videos and import them, or you can set in and out points on videos and just import the parts you want.

I can't import any files or folders into Final Cut Pro 7.0.3 projects

I can't import any files or folders into Final Cut Pro 7.0.3 projects. When I select import and then either files or folders, I am able to navigate to the drive where the media is being stored, but then when I scroll to locate the files or folders the drive disappears. This problem began as an intermittent problem, but now I cannot import any files or folders. This problem started when I upgraded my operating system to Yosemite version 10.10.2 on my mid-2010 Mac Pro running with 16 GB of memory and an ATI Radeon HD 5770 1024 MB graphics card. Can anyone help me figure out and solve this serious problem? Thanks!

Then just drag the files/folders from your hard drive into FCP. Don't use the IMPORT option...just drag and drop.
The problem started when you installed an OS that doesn't support FCP 7. So if you want things to work smoothly, it's best to go back to an OS that did support FCP 7. Yosemite was written without taking FCP 7 functionality in mind, so it isn't fully functional. It might not do one thing for someone...but works for you in that respect. But then you can't do something else. The ways it doesn't work is always random. Or it might work great for some people, because they don't use functions that might no longer work....so they don't notice it.

Correct way of importing an iMovie 6 movie into Final Cut Express?

Hi,
Many thanks in advance for your attention.
Any correct way to import an iMovie 6 HD movie into Final Cut Express for further editing?
I tried.
1. I Exported the iMovie, at Full Quality and it made a Quicktime version of that movie.
2. I then Imported this Quicktime version into Final Cut Express.
3. The audio was smooth, but at regular intervals, the video freezes for a second (and then moves on).
4. The movie plays smoothly back in its original iMovie incarnation and in its Quicktime incarnation. Only in Final Cut Express is there this intermittent freezing. Stop and start.
5. I have Final Cut Express 3.5.1 and iMovie 6 HD.
Thank you,
- Ross

"Full Quality" QuickTime export from iMovie gives you a DV stream which will need rendering in FCE. Rather than "Full Quality," choose "Expert Settings," and then the following:
Video
DV-DVCPRO - NTSC (assuming you're in USA)
Sound
48kHz
16-bit

I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

I use Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V.
How do I import from camera to Final Cut without going through the intermediate step of using iMovie?

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

Importing sound files in Quicktime into Final Cut Pro

This is my first project on a new macbook osx 10.4.8, and newly installed final cut 5.1. For some reason when I import quicktime files, I'm required to render, where there shouldn't be a need. Does anyone know why, or how I can fix this? I'm not ready to render yet, I'm just starting the project and wouldn't even have enough space to store the rendered files. Help!
Macbook Mac OS X (10.4.8)

Welcome to the forum!
First off, your question is a rather common one for those just starting out with FCP. It's covered very well in the manual and a simple search of the forum would have provided you an answer very quickly.
Essentially, ANY clip you place in your FCP Sequence that doesn't match your Sequence settings will need to be rendered. In all likelihood, your Sequence settings call for audio at 48lhz, 16 bit and the clip you're importing is something else. For example, CD audio is 44.1khz, 16 bit. You can usually convert most formats and settings using QT Pro. Do that BEFORE you import the file into FCP.
-DH

Importing high quality screen recordings into final cut

Please can someone here help me. Nobody in the Apple stores in London, great as they normally are, was able to help me.
I am trying to make a high resolution / quality video of screen recordings of a website for promotional purposes. I am able to make screen recordings using Quicktime7 and Screen Flow and assumed I could just import them into FCE, edit where necessary and then export into Quick time but here the problems start
1. Final Cut Express does not allow you to import screen recordings from Quicktime7. I was told the answer to this was to convert them into Mpeg 4 files using a free software called Streamclip. Fine. This works but by the time the files are in FCE, the quality is poor. By the time I have exported the video into quicktime so it can be viewed the quality is even lower. Result: Very low quality recordings
2. Using screenflow I can import the files directly into FCE but again the quality is reduced by the time they get there and again by the time they are exported into quicktime. Result" Low quality recordings.
I have looked at using 100% quality every where where this option is available but to no avail.
Finally an apple expert said the only option I had was to import the screen recording direct from the computer to my video camera via the video in port but that I needed to buy two connectors, namely video into dvi and then dvi into mini display port. Sounds laborious. Is this my only option? Do I need to upgrade to FC Pro (out of the question due to budget)?
I'm under time pressure. Any help very much appreciated!
Thanks
Chris

1. Whoever told you to convert to MPEG-4 is completely wrong and should not be working in an Apple store. FE only works in QuickTime using the Apple Intermediate Codec for HD material. It only works in specific screen resolutions used in video formats. 1920x1080, 1440x1080, 1280x720, and DV for standard definition.
2. Full resolution media from ScreenFlow can only be edited in Final Cut Pro.
You can record directly to a a camera but you need a high quality scan converter. Just doing it off a computer screen will produce rubbish video.

How can i get a tv show clip into final cut pro x?

say i download a tvshow clip from itunes, can i get that episode in FCP X?

Since you own the copyright, then you (or whoever works for you) must have a copy of the original master. Just use that. It's going to be much better quality than the compressed version you uploaded to iTunes.

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

Importing SWF into Final Cut Pro with no Background

Hi Everyone:
I've created an animated macromedia .swf file and imported
into Final Cut Pro successfully just as an .swf file. I can see the
.swf file animate in Final Cut Pro, the only problem is there is a
white background along with my animation. I've seen many slighly
related threads to this problem, but no end solution or work
around. any help? here's what i've seen in posts and other forums:
- create another layer below your object and place a
tranparent color swatch box the size of your stage size
- export the flash file as .mov with an alpha channel
transparency
- export the flash file as a .mov with an alpha channel, then
open in quicktime pro, then re export again as a quicktime movie
with the "Millions +" option.
- i've also heard something about having the right codecs, or
purchasing some other 3rd part software.
none of these approaches have worked for me. My Dream would
be to just import the .swf file straight into Final Cut Pro. I've
been exporting my flash movies as a png sequence and importing
every image into FCP for the time being. I'm also thinking about
just making the background bright green, because i think i just
chroma key it out, but i'm not sure how clean this will be.
here's the related thread:
http://www.kirupa.com/forum/showthread.php?t=242444
Thanks for any help.

You need one of these: http://desktop.thomsongrassvalley.com/products/videoconversion.php to do it properly. The ADVC 300 is the best option for the money.

Importing an Adobe Premiere Pro CC file into Final Cut 7

I am a student working on a video project and I want to import a Premiere Pro file into Final Cut 7. Does anyone know how to do that? I use Premiere Pro at home, but my school uses Final Cut 7. I just want to finish my project at home and then get it into Final Cut 7 at school. Any help would be much appreciated.
Thank you.

You might be able to do this by exporting XML from PPro and then importing that into FCut
Otherwise, you should ask Final Cut questions in an Apple forum

How do I import a 32gb maxwell Sandisk into Final Cut?

Similar Messages

Maybe you are looking for