How do I import a Data CD (with music) into iTunes?

I am trying to transfer music from Windows iTunes to Mac iTunes. Burned CDRs as Data CDs but I cannot seem to import them into Mac iTunes - help!

Try using File>Add to Library, navigate to the DVD and click Choose. Make sure that under iTunes>Preferences>Advanced>General you have "Copy files to iTunes Music folder when adding to library" ticked.

Similar Messages

  • How can i import the data from multiple sources into single rpd in obiee11g

    how can i import the data from multiple sources into single rpd in obiee11g

    Hi,
    to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
    tnx

  • How do i import videos ive take with iphone into my iphoto library.  iphoto only shows my pictures not the videos ive taken

    how do i import videos ive take with iphone into my iphoto library.  iphoto only shows my pictures not the videos ive taken

    Have a look here...
    http://support.apple.com/kb/HT4083

  • How do I import binary data files (with header info) into DIAdem?

    We have lots of data acquired by nCode datagate. Files are binary data with header info. How do I import this into DIAdem? Typical (short) file attached. Also of interest, can I stream data from Sony PC208/SIR1000 recorders?
    Attachments:
    Propshft.dac ‏4 KB

    I have successfully imported your file into DIAdem using the nCode file filter included with DIAdem. You might have to make that file filter known to DIAdem by following these steps (this assumes you have version 8 of DIAdem):
    1. Go to the 'Window' menu in DIAdem and select 'Close all'
    2. Go to the 'Settings' menu and select 'GPI-DLL Registration'
    3. Click the 'Add' button in the window and select the 'GfSnCode' DLL in the 'DIAdem/AddInfo' directory
    4. The program will prompt you to restart.
    5. After you have restarted DIAdem, go to the DATA icon, select 'File - Open' from the DATA menu and in the dialog that appears, choose 'nSoft Data File Format' in the 'Files of type:' field.
    6. Select your data file and load
    That's it.
    With regards to your Sony reco
    rder data, I would need to get my hands on an actual data file to try it out. In general, DIAdem can import ANY binary file format by creating a header in the 'File - Import via header' section in DATA. If you have lots of data files from the SONY recorder, a DLL can be created for that specific file format with the free DLL toolkit included with DIAdem.
    Leave me a message here if you have any additional questions.
    Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • How do I import a pdf file with layers into Motion 5?

    In earlier version of Motion, you could import a pdf file with all layers or even select layers you wanted to import. You did this by dragging the pdf file into the project and holding it until a popup appeard providing you choices for how you wanted to complete the import. In Motion 5.0.1 however, no such popup appears and it imports the file as a flat image file. Any ideas how to change this pelase?
    Thanks
    Greg

    Thanks Ben & Praveen. In FCP7 It was possible to import PDF files and as you did the import, make choices regarding layers you wished to import. FCPX appears to import PDFs but only as flattened files. I'll try keeping the file in PSD format and importing as you recommend.

  • How do I import one song from a cd into Itunes 12.01?

    Hello, I updated my laptop to Itunes 12.01: software is IOS X 10.9.5. I have inserted a cd and opened itunes. first surprise I found was that I can only see the cd, with its songs, it will not let me see playlists at the same time. and the only option that seems to be available was to import all the Cd but I only want to impor one or two songs from it. how do I do it? I tried highlighting but it will go back to the first song to star importing. also tried to play the song but still will go back to the first to import.

    Remove the checkmarks for the songs you do not want.
    To prevent songs from importing, click "no" after you insert the CD.
    When the list of songs appears in the iTunes window, click to remove the checkmark next to any songs you don’t want to import.
    To add the selected songs to your library, click Import CD near the top right of the iTunes window.

  • How can I import audio books from a CD into itunes 10.54.1.2 to then use on my ipad or iphone.

    I cannot seem to get the books/chapters to go into anything but the music category. Then just plays as music does. Anyone know if it is possible to import into the books category ?

    Thanks again for responding.
    I had set iPhoto to Automatically Look up Places (see my original post).  I tried Old Toad's suggestion, and the data was there for some of the photos but not all.  I THINK I just missed the GPS icon in the camera's display (brand new camera & my first with GPS).  I have been able to import the GPS Data on my most recent photos, but as they're all taken at home I'm going to test that over the long weekend.  But my best guess is that I just hadn't grabbed a GPS signal yet.

  • How do I import songs from ipad album app into itunes?

    Hello,
    I bought an 5 song ep music app by the Chinese musician Cao Fang (曹方) from iTunes app store, and I want to be able to hear the songs in iTunes, not just through using the iPad app. It doesn't show up in the File Sharing section. So is it possible to import the songs?  Can I at least 'play' the app on my computer in iTunes, or is it only playable on the iPad itself?
    Thanks!

    Hi Nick,
    I should work just as you imported songs into your iPod. Try opening your iPod in your ITunes. Once you can see your iPod songs just drag them to your library folder or what ever other folder you want them in.
    Since your computer crashed are you using another computer? does it have iTunes and iPod software installed? What OS does it run (windows/Mac)?
    Good Luck

  • Import winamp or media monkey playlists into itunes 11

    how can i import winamp or media monkey playlists into itunes 11

    Use File > Library > Import Playlist.
    (You may need to use ctrl-b or alt to make the menu bar visible.)
    tt2

  • I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

    I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

    HI Dave,
    I'm surprised you get no message when you attempt opening the Excel document in Numbers.
    I'm assuming Numbers 3.1, since you are running Mavericks.
    Does the Numbers file that opens show any content?
    Does it contain a table?
    How large?
    Does it contain more than one tab (indicating more than one sheet)?
    Do those other tabs contain a table?
    Have you checked those tables for data content?
    There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
    I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
    Regards,
    Barry

  • Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

    I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
    The meta data for each image is missing.
    I have over 2,000 images. I don't want to go back through each image and add meta data.
    Is there some way to move everything?

    No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
    Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

  • Oracle Forms - How can I create a Data Block with query

    Dear friends I have a question, I couldn't do this..
    I have a sql query, I want to show the datas of the query.. How can I do this. ?
    Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
    Semih

    Hi,
    You have two options
    1. create a view and base the block on the view
    2. create a block with a query Data Source Type of 'FROM clause query'
    Hope this helps
    Neil

  • How can I import UDOs data in earlier 2007 versions (before PL46)

    Hi Experts,
    I made an UIAPI AddOn that has several u201CChoose from listu201D (CFLs) and is working fine, In order to use CFLs I had to make an UDO.
    Mi problem is that my customer has SAP B1 PL42 and in this version the Data Transfer (DTW) cannot import UDOs data (this feature supposed to be available in the SP01PL06 version) and the DIAPI has no support to add UDOs rows (this feature is available from PL46).
    My question is, ¿How the old AddOns (PL42 and olders) that have CFLs did to import its data?, ¿How can I import UDOs data in PL42?
    Thanks

    Hi Mario,
    Unfortunately, there was no supported method for importing UDO data in versions prior to PL 46. The only option is to use the UDO form itself, within the SBO client, to load data. I have previously used the B1 Test Tools utility to load UDO data (which takes control of the UI so using it doesn't bypass SAP"s support rules) but it does take a bit of work to set up and you can't control the test tools through code.
    SAP don't allow the direct use of SQL statements on system tables. As all UDOs use system tables to some degree (ie ONNM etc), you can't use SQL statements to load data without breaching SAP's support rules and risking loss of support for your system.
    How much data is involved?
    Kind Regards,
    Owen

  • What can I do simply  to keep all my previous contents, (own pics, videos, etc.) on my previously authorized iPad on PC, but get a new authorisation and a right syncronization, without data loss with a new  iTunes on my new Mac?

    Friends,
    I already had an iPad(1) and its full contents (not only the purchased items, applications from Apple, but my all own pics, videos, songs etc.) is normally syncronized with an authorized PC (Windows) computer.
    Now,  I've bought a new MacBook Air computer, and want to sell my PC. But I don't know how to transfer (or syncronize) all of the contents from my previous iTunes on PC to the new one on the Mac.
    When I connected my iPad to my new MacBook Air, I promted, if I want to change authorization of my iPad to the MacBook.
    But also got a warning, that the new iTunes will delete from my iPad all my previously syncronized items, pics, videos and music, with the previously authorized  iTunes on the previous computer, expect the saved pics from the net.
    What can I do just like that, simply  to keep all my previous contents on my iPad, but have a new authorisation and a right syncronization, without data loss with the new  iTunes on my new Mac?
    Thanks a lot for your answer.
    ([email protected])

    Here are some instructions that I have posted several times that may be helpful to you as they have been to others. You can simply ignore anything that does not apply or that you have already done.
    As Alan stated above - transferring the iTunes library is the best first step. If you can transfer the iTunes library to the Mac, most of this will be unecessary for you to do.
    Very Important ....
    1. Authorize the computer.
    2. Turn off auto sync in iTunes
    3. Transfer purchases
    The text in italics is from the other thread - non italics are my words.
    The following was copied from this thread. This is essentially what you want to accomplish.
    https://discussions.apple.com/message/11527071#11527071
    1) Without connecting your iPad to your new computer, start iTunes. Click on iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your computer and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your computer, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
    Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your computer. Look at Photo Transfer App in the App store and you can search for others as well.
    https://discussions.apple.com/message/13016026#13016026
    This support site will help you with transferring iTunes music to your new computer.
    http://support.apple.com/kb/HT4527
    One final note - you may want to leave auto sync turned off - but that is totally up to you. I never did use auto sync.

Maybe you are looking for