How do I import a P2 spanned clip?

Hello,
I've not yet been able to find an answer to this problem - manuals/ websites etc.
I have a P2 spanned clip and would like to import it into FCP 5.
Please could you recommend the steps I should take, or perhaps refer me to a source that I might use to resolve this difficulty.
Thank you

Burping the import? Gross...
So it is creating QT files, but they are bad? Or do you have the red exclaimation points? Or does it fail to import?
#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
Shane

Similar Messages

How to selectively import part of a clip in the import window on FCP X ver 10.8

Hi guys just wondering how to selectivly import part of a clip in the import window, cant do it since 10.6 ver??. im now using 10.8

If you jump to 10.1 you will be wise to understand the use of the NEW Libraries and how they update.
Things have changed.
I'll post some info when I find it.
Found it:
http://www.apple.com/final-cut-pro/docs/Media_Management.pdf
Al

How to Successfully Import or Convert .MTS Clips

The .MTS footage from the Canon Vixia HF M300 is not importing well into Adobe Premiere Pro CS6. Basically, it imports without any audio. I tried downloading 6 different converter programs and the closest I got to being able to use the footage was converting it and then getting a super pixelated tripped up version. One conversion program let me convert it fine and when I played it back on Quicktime there was no noise in the image--no trip-ups, but then when I imported it to Adobe, it got messy and the image would tweak out. I even tried rendering one of the imported clips thinking it was a problem of the computer speed, but that didn't do anything to clean the image up. How do I rememdy the situation?

Try starting a new project
Import some clips into the media bin
Select one clip
Right click on the selected clip
Select new sequence from clip
Add media to this new sequence
Report back how it plays

Import (XF-300) MXF spanned clips in 5.5 - how?

Adobe claims:
"Enhanced Canon XF native support
Preview Canon XF footage in the Media Browser panel and utilize camera metadata throughout your preproduction and post-production workflows. Spanned clips are displayed as a single asset in the Media Browser, reducing clutter."
I say: Ok, how?
The online man page instructions for "Importing assets from tapeless formats" simply doesn't work. Selecting a single clip of a span imports that one clip. Selecting all the clips or a parent directory of the clips imports all the clips as separate clips - just like they appeared in PP5. It does not import mutiple copies, as Adobe claims will happen.
So it looks like "Enhanced Canon XF native support" claims are bogus, or maybe just poorly implemented.
What conerns me is that Adobe's help pages don't even reference XF format.
At this stage, it looks like Adobe Premiere Pro fails to properly support Canon XF-300/305, just as Premiere Pro 5 did.
Brett

Kevin, thanks for your prompt response.
I've finally had the time to try this again and understand it.
I wasn't using the media browser. I was using the import function from the Project panel, which is how I have always loaded clips. I had never used the media browser and assumed that one ended up using it anyway no matter which front end used for import. i.e. I thought the media browser was simply the back end file selector dialogue.
So I see that (only) the media browser will import spanned clips as one unified clip into the sequence, which is an improvement for sure. I do think that import of the Project panel should work the same way.
I initially had a problem though, as my top level directory above the numbers clip dirs was not CONTENTS. It had to be renamed to avoid conflict with other CONTENTS clip set in the same project. So the media browser refused to load the spanned clips together, but would allow me to load a single clip. It wasn't until I guessed, and renamed my top dir back to CONTENTS that things worked and the the View as dropdown showed the magic Canon XF option.
I suggest this implied requirement be made clear in the manual, noting that the top dir must be named CONTENTS for this to work. Yes, I believe that's the MXF standard, but many people will rename their parent directory so multiple cards can be copied into the same project directory, instead of having yet another single-entry directory above the CONTENTS directory, like CARD1 CARD2 etc.
I beieve that the software is at fault and should be changed - if it can see mutliple numbered MXF dirs at the same level, it should simply deal with them. I know you can't fix that, but please warn people.
Anyway, thanks again for your reply. It got me on the correct path to a solution.
Brett

Spanned clips from my p2 card won't import fcp6

hey shane
i am in fcp6 and having the spanned clip issue. i have a spanned clip that won't import into fcp6. i used p2cms to offload so i do not have the lastfile.txt but could you walk me thru how to import these 4 or 5 spanned clips?

As long as you have all the card dump folders loaded into the Log and Transfer window, FCP will stitch together spanned clips. So if your clip goes from one card to another, load both cards into L&T, then import.
Shane

Premiere Pro CC 2014 Does Not Import Panasonic GH4 Spanned Files as a Single Clip

Premier Pro CC 2014 does not import Panasonic GH4 spanned files as a single clip. I have made a short video that shows the problem with the GH4 footage and it show how the Canon XA-10 footage imports correctly.
Is this a known problem? Am I doing something wrong? It makes the Master Clip Effects in Premier Pro useless because every spanning fragment is turned into a master clip.
Problem demonstration video: http://screencast.com/t/03wzQoxAUXAQ

Jim,
I've looked up all sorts of MP4/MOV comparisons on the web ... most conclude that mov is perhaps a bit "safer" on an Apple OS and mp4 "safer" on a PC and non-Apple "devices", but generally list the contents of the two as being nearly indistinguishable. I do realize the Qt has had ... issues ... within the Adobe programs, especially on PC's.
You have any other good info? Always looking to learn from the more experienced ...
Neil

Importing tape into Imovie 11. How do I import all the clips as one long clip?

How do I import all the clips as one long clip? I have 45 min of footage and I want it as one long take I can edit in Final Cut ProX. When I import, all the clips are split up when the scene cuts. I just want the 45 min in one long video.

iMovie will import the tape as if it is direct from the camera. It will sense the scene breaks and put all the clips in chronological order.
If you want to import it as one long clip, I suggest you load the tape into the app that you edited the tape with. Then export it out as a QuickTime movie in the DV codec. You can import this MOV file into FCPX or iMovie.

How do I import a clip when the window automatically closes?

I was unable to even open After Effects CC when I upgraded to OS Mavericks. Once I realized adobe released a patch for it (the 12.0.1 "trial" update), the program opened. I thought all was fine, until I attempted to import a new video clip. It would not let me even move the clip, let alone edit it, before giving me a "grouping" error, and then abruptly crashing. Today Adobe released the 12.1 update, which seems to be running ok, except the window for importing footage automatically closes once opened. I can no longer just drag a new clip in to my composition either. How can I get by this?
-Christian

See this:
http://forums.adobe.com/message/5805902#5805902

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email come

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email comes through empty. Please help.

Copy that voice memo, create a new email and paste it and send it to yourself! You can save it to your computer now and send it to someone else

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

I figured out how to snap a still photo of a movie clip, but where then does it go, and how can I import it into my iPhoto library?

I was working in iMovie and discovered how to take a still photo of a movie clip. Now I can't find that still photo! Where did it go, and how can I import it to my iPhoto library?

Just found out and it is simple. When you find a frame in your video/movie of which you want a still photo or screen shot, just go to the frame and click on command, shift and the #3 in quick succession. You will hear a "click" like a camera taking a photo. The screen shot will then go to your desktop where you can drag it to iPhoto or an e-mail, or anywhere you like. Also you can rename the screen shot by double clicking on the wording under the screen shot on your desk top. Whew!

How can I import "extracted audio" clips from iMovie project into iTunes?

I imported my home video into iMovie HD 6.0.1 and extracted the audio. How can I get the extracted audio clip (aiff format) into my iTunes playlist?

Genny,
I just tried to answer your question over in the iMovie forum. Have a look over there.
Matt

How do i import video clips from iphoto to iMovie

how do i import video clips from iPhoto to iMovie

I've found dragging & dropping onto desktop & then drag & drop into iMovie works okay

I just recently upgraded to iMovie 10.0.1. Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes. How can I get my entire video clip at once without a break again?

I just recently upgraded to iMovie 10.0.1. Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes. How can I get my entire video clip without a break again?

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

How do I import a P2 spanned clip?

Similar Messages

Maybe you are looking for