How do I import and use the Keynote themes that I've downloaded?

I'm sure this is a stupid question, but I searched this forum & didn't immediately find the answer I needed. I've downloaded some Keynote themes (they have a .kth extension). How do I import these into Keynote 08 so that Keynote will recognize and use the themes?
Thanks!

Put the .kth in "Themes" folder under the route Home > Library > Application Support > iWork > Keynote > Themes - it will then appear (at the bottom) in the theme chooser when opening keynote.

Similar Messages

  • How do I find and use the "Spotlight Effect" in PS6?

    How do I find and use the "Spotlight Effect" in PS6?  I was using it yesterday and now I can find it ... help!

    Hi,
    I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
    There are also some presets under Presets including a Default Setting.

  • How can I access and use the alphabetical keyboard of the phone ?

    How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use.  Thanks for your help !

    Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard.  I had to give up and wait until I was back in my country (no password is then needed).

  • How do I import text into the Keynote Titile

    I am trying to use the Keynote title in FCPX - I have "imported" the title over the picture image clip that I want to use, and that works fine, but I am having extreme difficulty in changing the text in the boxes that appear from ex TITILE to what text I want to appear. I click on the box and maybe the text appears in the Inspector and I can change it, then move to the next box - even with the Select tool in action, I clcik away at this next box and it will not select it, so cannot change the text from say INTRODUCTION to what I want.
    Can anyone help me out on this - otherweise I shall abandon this title and try a different one.
    Thanks

    *** I GOT IT!!!!! ***
    I was getting really frustrated being the only one who COULDN'T figure this out...  I GOT IT!!!
    1.  Drag the Title to your Editor
    2.  Place your playhead cursor over the middle-ish area of the title.
    3.  With the title selected, Double-Click anywhere on your preview, that will select your dropzone and give you a white-glove cursor.
    4.  Slide the dropzone to the opposite side of your text. (don't worry, just put it back later)
    5.  Click off of selected title in timeline (click in the background or another clip)
    6.  Re-select your title clip.
    7.  Now Double-Click the text you want to edit.
    8.  When you're finished just double-click on the dropzone area again to "white-glove" it back!
    I never really contribute to message threads so, I guess it's about time I start eh?
    -David Tandy

  • How do i launch and use the apps i download on my mac pro?

    how do i launch and use apps i downlaod on my mac pro?

    ug.betty wrote:
    .. pro tools ...
    Have a look here  >  http://www.macprovideo.com/tutorials/pro+tools-suite

  • How we can import and run the matlab codes in labview using xmath script.

    hello,
    i have some GUI code in MATLAB and i want to process that codes in labview . tell me about the procedure how we can done this task.
    thanks in advance
    rachana
    Er. (Instrumentation)

    Hello,
    The title of your post asks about using Xmath script.  Is this what you intended?  You can use the Xmath script node in LabVIEW if you have MATRIXx 7.x or earlier installed.  However, the syntax is slightly different from the syntax of The MathWorks, Inc. MATLAB® software.
    In LabVIEW 8.0, we introduced LabVIEW MathScript.  The LabVIEW MathScript syntax is similar to the MATLAB language syntax.  In LabVIEW MathScript, you generally can execute scripts written in the MATLAB language syntax.  However, the MathScript engine executes the scripts, and the MathScript engine does not support some functions that the MATLAB software supports.  In order to reuse code that you have written, open the MathScript Window by going to Tools >> MathScript Window.  You can also use the MathScript node as part of a VI you are writing.  You can find the node on the Programming >> Structures palette.  You can import an existing script by right-clicking the node and selecting "Import..."  You can create inputs and outputs for the script by right-clicking on the node and selecting the appropriate option.  If you wish to call any functions you have written, put them in the MathScript search path.  By default, this is your "My Documents\LabVIEW Data" folder.  In LabVIEW 8.5, you can change the default search path for the main application instance by going to Tools >> Options.
    LabVIEW MathScript does not contain very many GUI functions at this time.  You can use the VI's front panel as your GUI, though, and interact with your program that way.  Let me know if you have other questions about moving your code or about specific functions.
    MATLAB® is a registered trademark of The MathWorks, Inc.
    Grant M.
    Staff Software Engineer | LabVIEW Math & Signal Processing | National Instruments

  • How to uninstall Inquisitor and use the updated AcidSearch (in Leopard)

    Title says it all I think - I loved AcidSearch - enough that I didn't use Safari 3 (beta) in Tiger because it killed AcidSearch and when I migrated to Leopard I missed it dearly and have been getting by unhappily with Inquisitor. Now there's a new AcidSearch and it's installed but my search tab is still controlled by Inquisitor - which I can't remove.
    The two ways to remove it that I've found while googling are running the install app again and clicking 'uninstall' - however that isn't an option - it just installs over the top over and over - or by removing it from the Input Managers folder in Library - but that's seemingly a Tiger-only folder now and there's nothing Inquisitor-related in it...
    I guess the other question I have is actually which is better - I only just now realized I can add search engines to Inquisitor - so that might make it very functionally similar to AcidSearch. I don't have very fast broadband, so I feel the predictive element of Inquisitor is useless.
    Any thoughts on which is better and/or how to uninstall Inquisitor (so I can choose!) would be greatly appreciated!

    Hi Alex,
    I just installed it to see where it places files, and the only place the latest version seems to install anything is in Hard drive -> Library -> Input Managers.
    It also (annoyingly) renamed my users Input Managers folder to what you have, i.e. Input Managers-Tiger (I have Cocoa Gestures in there, which was working just fine Mr InquisitorX developer...)
    After deleting the Inquisitor bundle from the top level Input Managers folder and restarting Safari it appears to have gone.
    What version were you using before? Have you tried downloading the same version from versiontracker.com and seeing if the uninstall in that version works?

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • How do i install and use the lacie hard disk

    i bought the 1TB Lacie Rugged Hard Drive because I have run out of disk space on my Mac desktop. Once I plug it in, I can't seem to format it for the Mac and then use it to transfer my iPhoto library from my desktop to the Lacie Hard drive. Please help! Thanks.

    I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
    ... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
    Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
    ... it was only a mistake if you didn't want TimeMachine to use it.
    So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
    ... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace.

  • How do I access and use a DNG file that I have saved?

    I have saved a NEF file as a DNG file before making any edits in ACR.  Because the ACR edits will be reflected in the NEF file when it is opened in Elements, I wanted to have a file that I could edit that did not reflect the ACR edits.  I can find the DNG file using Windows Explorer, but I can't seem to open it or make use of it.  Any help will be appreciated.

    jhrob wrote:
    Jim--I really appreciate your help. However, I'm going to be making a DNG file when I want absolute security. I can't find any way to restore the original NEF image in the ACR program than comes with Elements.
    Jerry H. Robinson
    I have never used Camera Raw with Photoshop Elements.  I haven't used Photoshop Elements since version 2.  But I can tell you that in Photoshop and Bridge it is really quite simple.  Using Bridge, simply right click on the raw image, and in the context menu there is an option enabling you to clear the settings.  It is different from one version to the next, but it is there.  I would think that there would be something similar in the Organizer.  Otherwise, one surefire way to do it would be to simply open the folder that contains the raw images and delete the XMP files for the image(s).
    I just read your message again.  What do you mean when you say you are making a DNG file when you want absolute security?  That doesn't make sense.  Camera Raw never changes your raw image pixels.  The original raw data is always there, always.  The changes made in Camera Raw are stored as metadata and as such can always be deleted.  The same is true with a DNG file, except that metadata is stored inside the DNG file itself.  In Camera Raw under Elements there must be a method in the Organizer similar to what I described above.
    Then you said you couldn't find a way to restore the original NEF image.  Do you mean, literally, the NEF file itself?  Or the look of the original file?  Are you keeping the NEF files?
    I think you are missing the point of using DNG files.  Security in and of itself doesn't seem to me a justification for using DNG.  You need to reconsider your workflow and what you are trying to accomplish.  I'm a little unclear as to what you are trying to do.

  • How do I clear all of the java applets that have been downloaded?

    I migrated firefox and other applications to my new mac so that I would not to reenter all of my passwords saved by firefox. However, it appears that the java applets were also transfered and one of these applets does not work with the new intel mac. I was able to get the same applet to work in safari, and I was able to delete the applet from safari as well, but was unable to do so in firefox.
    So, how do I clear all of the previously downloaded applets, or even better, just the one I want to? Clearing all of the recent history didn't work.
    Here is the site:
    http://www.mdbg.net/chindict/chindict.php
    == This happened ==
    A few times a week

    I did that already, and it cleared the applets for Safari, but not for Firefox.

  • My M-Air start up disk if full; I have the a new time capsule, how do I transfer and use the TC as my main storage drive?

    The start-up disk on my MAC AIR is full - I just added a new Time Capsule - how do you transfer your files from the AIR to the TC and set it up to be used as my primary storage disk - not my Mac Air

    Get a second external drive, drag both the iTunes library and the pictures to it, launch iTunes with the Option key held down, and point it to that instance of the library. This also works with iPhoto, but see below.
    A drive or partition needs to be formatted as Mac OS Extended in order to hold an iPhoto library or for Time Machine to back it up.
    (83755)

  • I have a G4 MacBook Pro and I just updated Firefox; it will not load the new Firefox and gives me an error code 10661; how do a load and use the new updated Firefox?

    I am currently using Firefox 3.6.9
    My operating system is Mac OX 10.4.11
    I have downloaded the most recent update for Firefox and it won't load.
    How do I load this recent update?

    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *http://support.mozilla.com/kb/Firefox+crashes+when+you+open+it
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How do I find and use the Firefox Identity Finder feature?

    On a web page that compares various Web browsers, the following narrative describes a Firefox 5.0 feature called Identity Finder:
    "Once Identity Finder has secured all exposed private data, a laptop thief or spying Trojan won't be able to steal your identity."
    I am running Firefox version 5.0.1.
    Thanks,
    DDOcean
    [email protected]

    Hi,
    I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
    There are also some presets under Presets including a Default Setting.

  • Why does my friends on skype hearing my music when im using a iphone5 headset and using the headset mic on a macbook pro?

    Hi! Im using a macbook Pro 17,5 and I´ll have one audio input and one mic input! But Im using only the audio input with my iphone 5 headset and using the mic from that headset!
    Why does everyone else on my skype hearing me and what Im doing on my mac?
    For example. I talking on skype with some friends and playing Counterstrike. They can hear me really good but they are hearing me shooting a target as well as they can hear me. WHYYYYY??
    Plz help me!

    You should post in the Skype forums. However I would presume that Skype needs a WiFi network not a 3GS network to function.

Maybe you are looking for