How do I import audio from a minidisc to use in iMovie?

I have a Minidisc with some audio of my band recorded directly from the mixing desk at a gig. I want to try to mix this audio in with some DV footage taken with a camcorder. Is there a way of getting this Minidisc audio onto my Macbook so that I can then import it to iMovie? Do I need an digital audio interface or some kind of conversion software? For instance, Wiretap Studio or Audio Hijack.

hey there 12frets,
they can & sometimes do record the audio on the same tape as video, but usually not film... & as Bengt said they also record onto a separate device always w/ film. generally for music videos the audio is "laid back" onto a Master video/audio tape & then the visuals are shot on film, though that is changing w/ the increased use of digital media/formats for audio & video. that's where the clapperboard came in to provide the film editor w/ a visual cue(closing the clapper) to synch the recorded audio(sound of the clapper) w/ the film.
there are lots of options for mics & recording devices. i have an Yamaha AW-16G & recorded bands live to 8 tracks then mixed it down to stereo & mixed that into an FCE project w/ video from 3 cams. i took the audio for the 8-trk recording from the house mixer's input channels direct outs-set my owl levels & EQ. it did take some time to do the mixdown. get some decent project studio monitors-i use Alesis M1 mkii active, but Event, M-Audio & Samson are also viable. i also use visual cues from the 3 cams to synch everything up as well as i integrated room sound from my main cam(locked down static wide shot) to add a bit of realism & crowd noise/appreciation- also juiced that up w/ an applause sound effect from Sound Dogs. i've been in audio & video for over 30 yrs & am constantly reading & studying to keep up w/ the technology & various techniques- so Google is your friend for researching & learning. Videomaker mag, DV Mag & Creative Mac(website) are some good places to begin.
good luck.

Similar Messages

  • HT4710 how to restore/import photos from Time machine while using Lion

    how to restore/import photos from Time machine while using Lion

    Launch Time Machine, go to the time you want to restore from and select what you want to restore and click restore - once the photos are restored improt to iPhoto - or restore the entire iPhoto librarhy and use it
    LN

  • How do I import audio from a website to Garage Band?

    Brand new to Garage Band (on the Mac, not iPad).  I am trying to import audio from a website with an .mp3 extension to Garage Band.  I'd like to extract just a piece of the audio, so I assume GB was the best way to do it.
    How do I import the audio to GB?  If GB is not the best way to do it, any other suggestions?  I need the piece of audio for a presentation I'm giving.
    Thanks.

    Do you have the audio as an mp3 file already? Then just drag it into GB's timeline. If you have to capture it first, there's several browser plugins that do it or general programs like Audio Hijack or WireTap.

  • How do I import video from my canon vixia hv40 into imovie?

    How do I import video from my canon vixia hv 40 into imovie?

    First decide which editing program you intend to use; iMovie, FCE, FCP, Adobe Premier, etc. Read the user's manual or Help files for your chosen application to determine the steps needed: the procedure will vary somewhat from application to application.
    Next, with the camera and the computer off, connect the Firewire cable to both units, then power up. Set the camera to VTR (play) mode. Open your editing program and follow the instructions provided in the Help files for capturing DV footage from tape.
    Do NOT expect the camera to mount on your desktop as if it were a hard drive or optical disc.
    -DH
    Message was edited by: David Harbsmeier
    Message was edited by: David Harbsmeier

  • HT3131 how do i get audio from my HDTV when using a hdmi cable and mini displayport??

    How do I get audio to display from my HDTV when I'm using a hmdi cable and a mini-displayport adapter on a macbook late 2008??

    The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
    With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

  • How do I import audio from a dvd?

    There is a song on a dvd that I want to import into iTunes. I searched all through iTunes store, amazon & the movie companies website, but there is no soundtrack available for sale.... or by the musicians anywhere.
    Is there a program that will record any audio that I play on my mac, and then I can import that audio into iTunes?

    It's currently unclear if actually copying a DVD is illegal. What is illegal under the Digital Milennium Copyright Act, is breaking the encryption on commercial DVDs (a necessary first step in copying). Recording the audio as it is played by your computer (what is sometimes called the analog loophole) is still, apparently, covered under the older fair use laws. So, as long as you're just recording the sound for your personal use, I think you're okay. Burn it to CD and sell or distribute it and you've crossed the line

  • How do I import audio from a portable cassette player

    onto my iMac? I have an interview I need to transcribe and it will be much easier if I can transfer the audio onto my computer rather than use my old Walkman.

    JulieS9164 wrote:
    thanks, that solves part of my problem. Does an adapter exist that will allow me to connect my cassette player to my usb port?
    I don't know of any. Sorry

  • How do I import video from a Canon GL-2 to iMovie '11

    iMovie '11 will not recognize my Canon GL-2 mini DV Camcorder,  so I cannot import video

    Hi
    As it is a miniDV tape Camera - then You need a FireWire Cable (If Your Mac have a FW-port - not all got this).
    my notes on this.
    NO CAMERA or A/D-box 
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE   Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • How do I import movies from my MacBook 09 to my imovie app for my iPad n 4s

    I keep receiving this notice when I click the import section "no projects available to copy from iTunes"

    Hi there,
    You may find the article below helpful.
    iMovie for iOS (iPad): Import from iTunes
    http://support.apple.com/kb/PH3239
    -Griff W.

  • : how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

    : how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

    Save the file from Gmail onto your computer and add it to iTunes.  How you save from Gmail is a Gmail question (their own support pages), not an iTunes question.

  • I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    iTunes will only import music from your phone that was purchased from the iTunes store.  To transfer music from other sources you have to use 3rd party software, such as PhoneView.

  • How do you import audio books so they are like the ones you buy from itunes

    how do you import audio books so they are like the ones you buy from itunes?

    There are a number of tools for merging the files into one. Personally I don't bother, but you'll find links on my page which describes how to manage Audiobooks on iPods.
    tt2

  • How do i import video from my go pro to i movies

    How do I import video from my go pro hero 4 to I movies

    What model MacBook Pro do you have? On my late 2011, I used to use a Mini DisplayPort/Thunderbolt to HDMI adapter to get video and audio from my Mac to my television. I used this adapter from Monoprice. Worked great - I just no longer use it because I bought a 27" monitor.
    You can also use AirPlay mirroring if you've the right MBP and an Apple TV - but the wired method works, too.
    Clinton

  • Adobe Presenter 7 and PowerPoint 2010. No Import audio from presentation button

    In Adobe Presenter 7 and PowerPoint 2007 I have the ability to import existing audio narrations by clicking on Import and then clicking the "Import from presentation" button. The button is missing in PowerPoint 2010. Any ideas on how to get it back?

    Hello,
    In PowerPoint 2010; "Import Audio from PowerPoint" is missing .We have logged bug for this. And we will definitely fix this in next release of Presenter. Please use PowerPoint 2007 to use this feature.
    Thanks,
    Shubhi

  • How do you import music from media player?

    How do you import music from windowz media player into Itunes?

    Perhaps this article can help.
    Importing Windows Media Audio into iTunes
    B-rock

Maybe you are looking for

  • Why is the template binding not refreshing?

    I made this itemtemplate for a combobox: <DataTemplate x:Key="EO_CategoryItemTemplate"> <Grid> <Line Stroke="Gray" StrokeThickness="1" VerticalAlignment="Center" X1="0" X2="{Binding ActualWidth, ElementName=cat1}" Visibility="{Binding Active, Convert

  • CAF create update issue

    Hi experts, i am facing a strange problem. in my application service i wrapped the create method of a entity service via custom operation type. when i try to create a new entity service using the application service method, everything is fine when i

  • Audigy SE, adding case ports? mic & headph

    My case came with mic and headphone connectors. They are not plugged into anything but I noticed some pins on the audigy se and was wondering what was what and if I could plug my ports in. pic --> http://www.xcomputer.cz/ImageWrite.asp?CO=HC36&FL= I

  • ProRes conflict between After Effects and FCP!

    Well, I am currently editing a video where I need a lot of after effects / final cut interactions. My sequence settings in FCP is ProRes (HQ), Frame size 1920x1080 (HDTV 1080i) and fps on 29.97, and running latest version of FCP. In After Effects CS3

  • Purchased CS2 from EBay - Serial # Still Registered.

    I purchased CS2 from a seller on eBay. When I attempted to install the Serial # was still registered. I contacted the seller and he said he was not the original buyer of the program. Is there anyway I can have the registration deactivated so I can in