How do I import BMP files?

If i navigate to a folder with TIF files, i see them. If i navigate to a folder with BMP files, i get "No Photos found".
I am new to lightroom .....

You can't import or use BMP files in Lightroom. You'd have to convert them to JPG or TIF using something like IrfanView.

Similar Messages

How do I import music files from a flash drive to my iTunes library on my laptop

How can I import music files from a flash drive to my iTunes library? I put the flash drive into my laptop, selected " add file to library", selected the songs I wanted from the flash drive, and it looked like they were added as the names show under " recently added". Then I removed the flash drive from my laptop But when I select one of the songs and try to play it a message saying "the song could not be used because the original file could not be found. Would you like to locate it?" So it seems the actual files did not transfer. What do I do? I have done this. With a cd in the past with nsomproble,.

Suncadia wrote:
Thank you!! This worked. It does seem there should be an easier way but this did work.
Dragging the files to "Automatically Add..." is pretty easy once you know where to look. Just make sure iTunes is running when you do it; otherwise the files will just sit there until the next time you open iTunes.
(Interestingly, the way you originally tried to do would have worked fine except for one little detail: you have to first go into Edit > Preferences > Advanced, and check the box for "Copy files..." If that is not done, iTunes will reference the files on the flash drive, which of course are not accessible once the drive is removed, as you saw.)
Anyway, glad that all is now sorted. Enjoy the music!

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

How do I import a file that is on the desktop to iMovie?

How do I import a file that is on the desktop to iMovie?
I had some 8 mm film put onto DVD by yesdvd and now want to import the 3 hours of video into iMovie to edit and create a short story.
I have created a dmg file on my desktop from the DVD but am at a loss as to what's next. There are a bunch of files on the dmg file, including one that says video, which has a bunch of files in it that are video. I assume I need to convert them to a format which iMovie likes. Which one should I use, and which program should I get to do it?
Once I have done that, where should I put the converted files and how do I work with them using iMovie?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to batch convert bmp files into jpg by dos command or c# program language?

How to batch convert bmp files into jpg by dos command or c# program language?
Many thanks for replying.

Try
GraphicsMagick.

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

How can I import Raw files from a canon eos 6d?

How can I import RAW files from a Canon Eos 6D into aperture?

Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have been in the latest update, 4.02.
In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
While I can't say for sure Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
regards
And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

How do I import mpg files made by an old Sony camcorder into iMovie 11?

How do I import mpg files made by an old Sony camcorder into iMovie 11?

I had the same problem. Here is a very easy solution that worked for me.
1- Open the .mpg video with QuickTime Player
2-Go to file/export/ and pick the "Ipad,Iphone,Ipod Touch & AppleTV" option
3-Save your movie with the option "ipod touch &iphone 3GS" picked
4-Confirm by choosing folder of choice to save it in
Now this new version of the movie should be able to be read in imovies.
Hope that helps!
Good luck.

How can I import vob files into imovie 09?

how can I import vob files into imovie 09? i have some home movies on dvd that i want to edit.

You might want to look at this one too. Very easy to use and it doesn't require the Apple MPEG-2 playback component.
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

How can i import mpeg files into iMovie?

how can i import mpeg files into iMovie?

Where are your MPEG stored?
I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

How can I import MP4-files in FCPX?

How can I import MP4-files in FCPX? Should i convert the files? Do you know good (free) software?
Thanks!

MPEG-4 isn't nearly enough information. There are many other factors that determine whether it will work in FCP. Many MPEG-4 files can be imported and optimized directly into the application.

How do I import BMP files?

Similar Messages

Maybe you are looking for