How do I import CD's with EMI copy control?

I am very new to the whole "digital music" thing, but since I bought my iPod I have been systematically converting my entire CD collection onto my iPod (around 300 CDs). I have bought and paid for every single one of those discs... I recently bought the latest studio album by Korn (See you on the other side), only to find that there is no way of importing it into iTunes because of the copy control imposed by EMI. Can anyone help me resolve this problem legitimately? The irony is that, failing to resolve this "properly", an honest, music-buying person will be forced to find some illegal way of converting my music to my chosen listening medium!! I have tried to use Exact Audio Copy, and I did manage to import the songs to iTunes, but they were all garbled - so either my settings were wrong or the software was unable to get through the copy control. Any assistance would be appreciated!

Unfortunately, Daneel, there is no way around the copy protection to get these types of CD's to import correctly into iTunes. Even if there were a way to get around the copy protection, by the "terms of use" of these forums, I can't discuss it. Most of us who most regularly in the iTunes/iPod forums make it a point not to buy these types of CD's because the record companies are denying us are fair use rights when we get use the CD in the manner we prefer. These types of discs can't even rightly be called CD's because of the protection. I would suggest that if the CD is new, you return it to where you purchased it. Politely explain to the store that it is defective as you can 't get it to import into iTunes & you would like your money back. I'm sorry I couldn't be more helpful, but this is the wonderful world of "digital rights management" that the record companies have forced upon us.

Similar Messages

  • Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

    when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

    To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • How do i import a CD with film footage onto iMovie09?  Thanks!

    How do i import a CD with film footage onto iMovie9?  Thanks!

    Are you talking about a CD with a data file on it?  If so what type of file is it?
    Matt

  • How to use old archieve logs with a new control file

    Environment:
    ORACLE_BASE="/export/home/oracle"
    ORACLE_HOME="/export/home/oracle/product/8.1.6"
    NLS_LANG=".UTF8"
    2 partitions:
    i) /data1 -- contains important datafiles (OS striping on 3 hard
    disks)
    ii) /export/home -- contains the oracle program, and SYS/SYSTEM
    datafiles
    Problem:
    -/data1 cannot be read/mount (damaged)
    -oracle failed
    Action Performed:
    -reinstalled OS
    -mount /export/home successfully (all oracle system files,
    instance init files exist)
    -/data1 is an empty partition
    -created the oracle user, and its groups
    -chown recusively for the $ORACLE_BASE directory
    -set all the oracle environment variables
    -attempted to start the instance, but failed due to a control
    file was
    missing
    -since control files were set to be mirrored, i copied a control
    file somewhere
    from /export/home/oracle/oradata/<SID>/control1.ctl to
    /data1/oracle/oradata/<SID>/control2.ctl (i.e. have them back to
    their original locations)
    -the instance failed to start as well, since the datafile set in
    the control files couldn't be found
    -this forced me to re-create the control file... b4 i re-create
    a new control file, i backed up the old one
    -once the control file was created, the database can be started,
    but, to oracle, all achieve log information are lost (although
    the achieve log's physical files r still there)
    -i imported the important data from a dump file that was
    exported a week ago b4 the system failure
    -since we r using the new control file, the redo logs switch
    contains no achieve log information that the old control file
    has, so running "recover database" doesn't do anything
    Purpose:
    since the dump file is a week old, i'd like to get the data
    after my last export and b4 the system failure. the database was
    run in arhieve log mode, how can i recover those data with the
    new control file
    Question:
    -how can we create a new control file that can drive the old
    achieve logs?
    -can we convert the achieve log data (.dbf format) into text
    format?
    -can we still use the old control files to start the database?
    -what's a suggested solution if we'd like to re-construct the
    database up to the moment b4 the system failure in another
    server?
    thx

    user3930585 wrote:
    I am in an unenviable position, with an unsupported database.
    We are running Oracle 9i on Windows XP. We are upgrading soon to Oracle 11g on a newer platform, but need to get our development environment working first.
    We lost a system that was running our development database without having a database export. The C drive was placed into a new system as the D drive.
    I have loaded Oracle 9i on the C drive, but I have been unable to determine how to point it to the existing data files on the D drive. My search skills may be the limiting factor here...
    We cannot simply load the drive as C, since the hardware is different.
    What are the steps to point the new database software at the data files on the D drive? Or, how do I copy the old data files into the new Oracle Home and have them recognized properly?
    Are you stating that you don't know how to use COPY command?
    Can you recreate same directory structure on new C drive as exist on old C drive?
    Can you then drag & drop copies of the files?

  • How to detect the key enter with a numerical control without using loop event?

    I want to accept a numerical value only when the key enter is pressed, but without using the event. How to detect the char "enter" with a numerical control?
    Thanks!

    When the user edits a numeric control with a keyboard, its property "key focus" is true. When the user hits enter, key focus becomes false. Poll the property to latch the control valuse at the true-false transition. That won't work if the user modify the control using up and down arrows.
    LabVIEW, C'est LabVIEW

  • All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

    All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

    That is the way the iphone works.
    You need to copy everything from your backup copy of your computer.

  • Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

    Dear Adobe Forum,
    I have the following problem, please help:
    I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
    avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
    What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
    Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
    Thank you in advance
    Leonardo

    Now I show you details of 2 files:
    the first video clip which you can import with sound (works):
    Video:
    1280 x  720
    data rate: 4259 kBit/s
    total bitrate: 4387 kBit / s
    Single bit rate: 29 single images / second
    Format                           : AVI
    Format/Info                      : Audio Video Interleave
    File size                        : 63.5 MiB
    Duration                         : 2mn 1s
    Overall bit rate                 : 4 388 Kbps
    ID                               : 0
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=3, N=15
    Codec ID                         : H264
    Duration                         : 2mn 1s
    Bit rate mode                    : Variable
    Bit rate                         : 4 248 Kbps
    Maximum bit rate                 : 4 001 Kbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.154
    Stream size                      : 61.4 MiB (97%)
    Audio:
    Bitrate: 128 kBit/s
    Channels: 2 (stereo)
    sampling rate: 48 kHz
    ID                               : 1
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format version                   : Version 4
    Format profile                   : LC
    Format settings, SBR             : No
    Codec ID                         : FF
    Duration                         : 2mn 1s
    Bit rate                         : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Stream size                      : 1.85 MiB (3%)
    Alignment                        : Aligned on interleaves
    Interleave, duration             : 21 ms (0.64 video frame)
    the second video clip which you can import without sound (doesn't work with sound):
    Video:
    1280 x  720
    data rate: 4278 kBit/s
    total bitrate: 4406 kBit / s
    Single bit rate: 29 single images / second
    Format                           : AVI
    Format/Info                      : Audio Video Interleave
    File size                        : 69.3 MiB
    Duration                         : 2mn 11s
    Overall bit rate                 : 4 407 Kbps
    ID                               : 0
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=3, N=15
    Codec ID                         : H264
    Duration                         : 2mn 11s
    Bit rate mode                    : Variable
    Bit rate                         : 4 267 Kbps
    Maximum bit rate                 : 4 001 Kbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.154
    Stream size                      : 67.1 MiB (97%)
    Audio:
    Bitrate: 128 kBit/s
    Channels: 2 (stereo)
    sampling rate: 48 kHz
    ID                               : 1
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format version                   : Version 4
    Format profile                   : LC
    Format settings, SBR             : No
    Codec ID                         : FF
    Duration                         : 2mn 11s
    Bit rate                         : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Stream size                      : 2.01 MiB (3%)
    Alignment                        : Split accross interleaves
    Interleave, duration             : 21 ms (0.64 video frame)
    Consequently, as you can see, they have both nearly the same information
    Both video clips have the following audio codec:
    AAC
    In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
    But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

  • How can I import CD's with differing custom settings? IWhen I want to change settings the AAC encoder window does not appear because Itunes has adopted the first custom settings as default.

    I imported a CD with custom settings for stereo bit rate, sample rate and channels. When I tried to import a second CD with different settings I could not get to the AAc encoder window that gave the settings options. The custom settings I had chosen for the first CD had become the default "custom" settings.

    Hi there,
    please take a look at my suggestion under message #19227279
    regards,
    Markus

  • How do I import packages beginning with org or com?

    Any time I try to import packages beginning with org or com, I am told that the class was not found in import. Specifically, I am trying to use SVG Graphics, and here are the import lines that are not working:
    import org.w3c.dom.*;
    import org.apache.xerces.dom.*;
    import com.sun.awt.svg.*;
    import org.apache.batik.svggen.SVGGraphics2D;
    import org.apache.batik.dom.GenericDOMImplementation;
    import org.w3c.dom.Document;
    import org.w3c.dom.DOMImplementation;
    What do I need to change, or what do I need to download in order to make this work?
    Thanx.
    -Tinclon

    First you need to have the jar files containing these packages. When you have these packages, you have to set your classpath for these jar files.
    -Dieter

  • How do I match encore buttons with my remote control

    So, I've made a menu in Encore and when I build the DVD and put it in my DVD player, the buttons don't work how I want them to with my remote control. For example, on the main menu (which I created in After Effects) I have two buttons (one above the other) - "Play" and "Chapters." To go from Play to Chapters on the main menu, I have to push the right arrow button on the remote instead of the down button.
    Another example is my chapters menu (created with an Encore menu). I have 6 chapters buttons, plus a "next" and "main menu" button. The logical thing to do with the remote is press the down button when you want the one below, right when you want the button on the right etc. etc. but instead it's all mixed up.
    Hopefully that makes sense . . . so how to I tell encore which button on the remote I want to be pressed to go to the desired button on the menu?

    It is called "button routing." When the buttons are nicely lined up, "automatic" (the default) usually works well. But sometimes not. Also, if you move buttons around, you can change the numbering.
    In the menu viewer, click on the icon for "routing." This will show you what "number" each button is, and what number button each remote arrow click will go to.
    You can turn automatic routing off, and drag these numbers to set the remote as you wish.
    http://help.adobe.com/en_US/encore/cs/using/WS74BC1059-66C3-46c5-9FA6-78DF10B38353.html

  • Problems with bill copying control and materials with variant configuration

    Hi experts,
    I have a problem with a bill copying control and the way that my customer is trying to create and print the Bill (VF01).
    Let me explain...They have in a Sales Order a material with variant configuration per position, each one can have many characteristics. This characteristics must be printing on the billing document, creating different bills 'coz the max. lines number is 18, so the bill must change page per material-characteristics.
    Example:
    Max. Number Lines = 3
    Position 10      
    Material A     
         -Characteristic A
         -Characteristic B
         -Characteristic C     (Bill 1) 
         -Characteristic D
         -Characteristic E
         -Characteristic F     (Bill 2)
    Position 20
    Material B     
         -Characteristic A     (Bill 3) counting characteristics upside
         -Characteristic B
         -Characteristic C
         -Characteristic D     (Bill 4)
    I created on Tx VOFM (Data Transfer-Billing documents) a routine trying to control this jump, but my problem is when I'm creating the Bill document (VF01) this work only by position, the debugging enter per position.. so I don't have any control to tell the program must count the characteristics and create another bill.
    So... Somebody can help me..or have any idea to solve this problem.....
    Thxs a lot!!!!
    Diego Helfer

    HI Diego
      For our coming assignment, we do have similar sort of situation. Currently we are in Requirements Gathering phase.
      Though we do not have Variant Configuration in place, we do have restriction for no..of items to be used for printing in Billing Documents.
      Current proposal is that we will restrict at Sales Order Creation. If the number of items are increasing, we will restrict saving the document and loading has to be done again. As itz better to restrict at initial phase.
      Our schema is One Sales Order -> One Delivery -> One Billig Document.
       Will post if we can manage to acheive some other way and do request you the same.
    Kind Regards
    Eswar

  • How can I import photos edited with Photos on iPad to iPhoto on Mac, including all edits??

    During a long vakantion trip, I took many pictures and imported them in Photos on my iPad. And during the trip I edited many photos: croppig, changing colors and brightness, etc.
    Now back home, I would like to import all these photos into iPhoto on my Mac, including all the edits of course.
    I imported a few hundred and saw at once that the edits were not imported completely and not correctly (probably most is not imported).
    Can anyone please advise how this should be done.
    Thank you very much,
    Frans

    Making a trip, I import, select and edit pictures, as I have the time to do so. So, when I come back home, I expect importing to the Mac and reviewing only.
    You are caught in the transit.  If you still had iOS 7, that would have been no problem. Your edits in iPhoto on the iPad would have transferred to the  Mac, and you would even have been able to undo the Camera filters. Unfortunately, iOS 8 is ahead of the photo applications on the Mac.  The sidecar files with the edits transfer to the mac, but no software that I know of can read them. It will be better in a few month.
    Do you know of any other application which can be used on both, iOS and OS X, to edit photos??
    Right now, the only app I know is Pixelmator.
    Pixelmator on the iPad can save and open files on iCloud Drive. But you would need to upgrade your Mac to Yosemite to use the new Pixelmator for Mac and to be able to access iCloud Drive from the Mac.

  • How do you import quicktime.mov with xml subtitles?

    Received QT movies that have subtitles using tx3g (embedded xml). How can I get the subtitles into Finalcut Pro? When I import the movies in Final Cut the subtitles are missing. Tried to export the xml from QT, then import the xml into Final Cut - but it asks for the translation document - which I do not understand.

    I just converted a wmv file into swf by first opening it in Quicktime (first I had to buy Quicktime Pro to export it to mov and Flip4mac to get it open in the first place, so you're ahead of the game). Then I went into the Adobe Media Encoder that comes with CS4 and converted it into a flv file from there. Then I went into flash and used 'import video', and saved it as a swf file, posted both into my website folder, and saved the skin that it generated into the main website folder where the html file is, it wouldn't show the buttons until I moved it.
    Hope that helps.

  • How do I import AVI video with stereo audio (and keep it that way)?

    Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
    Here's the deal...
    I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
    Video
    Length: 00:00:36
    Frame width: 320
    Frame height: 240
    Frame rate: 25 frames/second
    Audio
    Bit rate: 128kbps
    Channels: 2 (stereo)
    Audio sample rate: 44 kHz
    I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
    Type: AVI Movie
    File Size: 1.1 MB
    Image Size: 320 x 240
    Frame Rate: 25.00
    Source Audio Format: 11025 Hz - 16 bit - Mono
    Project Audio Format: 11025 Hz - 32 bit floating point - Mono
    Total Duration: 00:00:36:15
    Pixel Aspect Ratio: 1.0
    Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
    When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
    Source Audio Format: 44100 Hz - 16 bit - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
    (And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • How do I import a PDF with typewriter objects?

    I have a saved .pdf with text created by the typewriter tool. When I import the .pdf in InDesign (I'm using CS4), the typewriter text disappears in the InDesign document. I cannot find any preferences or settings in either Acrobat or InDesign that solves this problem. Any help is greatly appreciated!

    Text that is typed into a PDF file via the Typewriter Tool (anyone remember what a “typewriter” is?) is treated as an annotation just as cross-outs and highlights applied to existing text are.
    InDesign (and Illustrator) only import the base PDF document, not annotations.
    What you need to do is to flatten the annotations into the base document. This may be accomplished via executing a one line JavaScript will flatten all annotations / comments within a PDF file into the base document. This line of JavaScript is: 
           this.flattenPages(); 
    This is documented in the JavaScript API Reference that is part of the Acrobat X SDK, freely downloadable from Adobe's web site.
    This function is more fully documented in the PDF file I've attached to this posting.
    After this process, the resultant PDF file will fully place within your InDesign (or Illustrator) document!
    Adobe most strongly recommends that you not “refry” a PDF file by printing to the Adobe PDF printer to get a new PDF file. Printing from Acrobat is optimized for printing, not PDF creation.
              - Dov

Maybe you are looking for