How do I import .mts or .m2ts files?

imovie sees them cut I can't select them! They are AVCHD files!

iMovie ’08 and Sony HDR-SR1 and HDR-SR7 compatibility
iMovie ’08 and the Sony HDR-SR1 and HDR-SR7 camera support AVCHD (high-definition) and MPEG-2 (standard definition) content when the following guidelines are followed:
Sony HDR-SR1 & HDR-SR7 Content Power Mac G51 Intel-based Mac
AVCHD Only No Yes
MPEG-2 Only Yes Yes
When the Sony HDR-SR1 and HDR-SR7 cameras contain both AVCHD and MPEG-2 content, iMovie ’08 will be able to import the MPEG-2 content. However, to import the AVCHD content to an Intel Mac, you must first erase the MPEG-2 content on the camera

Similar Messages

  • Importing AVCHD .MTS  and .M2TS files (Sony HDR-SR1) into iMovie 08

    I've read numerous other threads about trying to get these files into iMovie 08 but I'm still having problems.
    I can plug my camcorder in just fine and have it import directly off there. But for older video files that I took with this camcorder I have two folders. One with just the .MTS files that I pulled off the camcorder. And the other with the YYYYMMDDHHMMSS (.modd & .m2ts) files that I archived (using my sony software) on my pc way back when I was using my PC for video editing.
    I created a .DMG that I copied everything from my camcorders HD to. I was able to mount this and iMovie 08 worked just like when I plug my camcorder in. But my problem comes when I try to work with the older .MTS and .M2TS files that I backed up. I was hoping that I could just put them in the
    DMGIMAGE\AVCHD\BDMV\STREAM folder and have it import just like before but no luck there. Any ideas as to how I can go about pulling these old raw video files to work with in iMovie? Thanks.
    Message was edited by: Billy McQueary

    Welcome to the  Discussion Forums.
    You might try voltaic to convert these files before adding them to imovie

  • Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

    when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

    To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

    How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

    Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

  • How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing

    How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?

    You can't.  (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
    Geoff.

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • I used the utility, MozBackup.exe, to create: Firefox___.pcv and Thunderbird___.pcv. How do I import or use these files to update from AutoCADGuru to ProCADGuru

    Firefox Team,
    I used the utility, MozBackup.exe, to create:
    Firefox 3.6 (en-US) – 2013-02-10.pcv
    Thunderbird 13.0.1 (en-US) – 2013-02-10.pcv
    How do I import or use these files to update from AutoCADGuru to ProCADGuru?
    Thanks in Advance,
    Kenny

    You are giving conflicting information
    Your question started with "How do I import or use these files to update from AutoCADGuru to ProCADGuru? "
    Then you said:
    "Autodesk's legal department threatened me with a law suit, because my domain name had “AutoCAD in it. So I change it to ProCADGuru. I created” Firefox 3.6 (en-US) – 2013-02-10.pcv and Thunderbird 13.0.1 (en-US) – 2013-02-10.pcv to back everything up. Now I need to know how to use them to restore all of that saved data and update it to my new domain. "
    Then you said:
    "How do I import or use these files to update from www.AutoCADGuru.com to www.ProCADGuru.com?"
    So all that you have explained so far has been about closing down one webhost and moving to another, which has nothing to do with Firefox or Thunderbird.
    Then today you say:
    "I need to know how to use these to restore all of my Address books, email books, sent, saved, and settings for both Firefox and Thunderbird. "
    What is the problem you are trying to solve here? is this about transferring Email settings in Thunderbird, Bookmarks in Firefox, moving a website from one host to another, or something totally different?

  • How do you import multi track wav files

    How do you import multi track wave files into Logic Pro?
    These files are form a Sound Devices 664 mixer.

    Is this a 5 or 6 channel single wav file? 
    I don't believe Logic will import these but can't be 100% sure because I'm not using the very latest version, I'm at 9.1.5 because it's stable. I do know that "SoundTrack Pro" that shipped with the disk version of Logic can export multichannel files so I'm guessing that it may very well open them as well. Soundtrack Pro has been discontinued but if you do have it, make sure it's the latest version.
    Or... if you know anyone with the Nuendo DAW, it will open multichannel wavs which you can then export to any format you wish.
    Might also want to look at "Reaper" it may well open Multichannel WAV files and has a 30 or 60 day trial license and only costs $60 for a license. An amazing DAW mainly developed by a single individual.

  • How can I import or download AVCHD files on a memory card to FCE?

    How can I import or download AVCHD files on a memory card to FCE?

    What camera is this from? Make sure it is actual AVCHD and not some variant such as AVCHD Lite which is not supported.
    Also, try this: In the Log and Transfer Pane, click on the Gear icon do set the preferences and set the Import 
    Preferences > AVCHD Plugin > AC3 Audio to Plain Stereo.
    You can also download a trial version of Clipwrap and see if by converting the files to AIC with that software, then importing the files to FCE you have better luck.
    http://www.divergentmedia.com/clipwrap
    MtD

  • How do I import iPhoto raw (NEF) files into Lightroom 3.6?

    how do I import iPhoto raw (NEF) files into Lightroom 3.6?

    You will need an application that can convert those pcd files into one that iPhoto supports, mainly jpeg. GraphicConverter is supposed to support many, many formats and might just support the pcd. If so you could use it to convert them to jpegs.
    There's an automator workflow that I've put into an application that will take many image files and convert them into jpeg with the RGB color profile. I've never tried it on the Kodak files but you can give it a try. It's called +*Convert to JPG and Embed sRGB profile*+ and can be downloaded from Toad's Cellar. Make a copy of a couple of files and see if it will work. If so then you can batch convert folders of the files at once by dragging them onto the application.
    I believe GC can do batch conversions but am not familiar with the application.

  • How do i import pdf or doc file into ppt?

    how do i import pdf or doc file into ppt?

    This forum is for questions related to https://workspaces.acrobat.com.
    Perhaps you would get a better answer in the Microsoft Powerpoint forum: http://answers.microsoft.com/en-us/office/forum/PowerPoint?auth=1

  • How do I import .MTS files from Card into I-Movie

    how do i import files from my HD camcorder to iMovies?

    Quite a few but mine specifically is the Sony dsc hx200v.
    My New Mac desktop with Lions latest updates?
    18.2 mp camera and 1080p HD video
    The video files AVCHD movie quality will not transfer to IMovie .mts files need to be converted. I'm looking for the best process for Mac.
    Also where do I show as running Tiger?
    Thanks.

  • (How can we) Import Flash Professional .FLA file format?

    How can we import a Flash Professional .fla file format into Flash Catalyst? It would appear that we can't...at least not yet! I have added this as a feature request within the adobe labs site for Catalyst. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the
    idea.
    Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects.
    Now that we are looking to migrate to FlashBuilder 4, and start to use Spark components, we are trying to find a workflow that allows us to use Adobe tools and to reuse our existing vector artwork. Since we have such a large number of assets, we are exploring various approaches, including the use of JSFL. So far we haven't found a good way to migrate from Flash-built skins for Flex 3 to Catalyst-built skins for FlashBuilder 4.

    Hi Ajay,
    See attached V 7.0 example...
    Hope it helps,
    Nick
    Attachments:
    Read_txt_File.vi ‏20 KB

  • How do you import data base dmp file in oracle 10g

    How do you run data base dmp file in oracle 10g

    Examples..
    Table Exports/Imports
    The TABLES parameter is used to specify the tables that are to be exported. The following is an example of the table export and import syntax:
    expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
    impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
    For example output files see expdpEMP_DEPT.log and impdpEMP_DEPT.log.
    The TABLE_EXISTS_ACTION=APPEND parameter allows data to be imported into existing tables.
    Schema Exports/Imports
    The OWNER parameter of exp has been replaced by the SCHEMAS parameter which is used to specify the schemas to be exported. The following is an example of the schema export and import syntax:
    expdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log
    impdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=impdpSCOTT.log
    For example output files see expdpSCOTT.log and impdpSCOTT.log.
    Database Exports/Imports
    The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax:
    expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
    impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.log

  • How do I import video and sound files from a hard drive into Final Cut Pro X?

    I just installed the lastest upgrade to Final Cut Pro X.  I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer? 

    File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

Maybe you are looking for

  • Trouble with Adobe Acrobat Pro installation from Creative Cloud

    When I attempt to install Adobe Acrobat Pro from Creative Cloud, it will always fail on the first attemp. If I retry, it installs it. Then, when I open a pdf document, the application quits in seconds. I get a modal window with the license agreement.

  • Field name of column to be captured after click using Hotspot in block ALV

    Dear All , A block list ALV Report has been designed using ' RESUSE_ALV_BLOCK_LIST_APPEND' . On a particular cell of the ALV List another screen comes up which gives details of that particular cell by fetching data from a particular Ztable .In the wh

  • Plugged ipod in, not showing it in iTunes

    I plugged my iPod into my laptop, it isnt showing that my iPod "Gabby" is even plugged into the computer.  Usually you go to 'devices' the it shows that the device is plugged in.  It's not doing that.  trying to plug it into Windows

  • No widget shows up in PS cc lighting effects what do I need to do?

    I am trying to use PS cc lighting effects and cannot get the widget to show up to move the light(s) around and position correctly. all the other adjustments, presets and properties panels show up, but have no way to adjust the lighting in the preview

  • Home sharing not working after update to latest version of itunes

    Prior to the latest update I was able to properly share items across Home Sharing from my main computer to the laptop and back.  Now after updating to the newest version on all there is no longer the option to download items acoss into the other mach