How do I import RH for Word WinHelp project into RH7 HTML?

I'm trying to convert a WinHelp project (created by someone
else in RH5 for Word) into a full HTML Help project in RH7, so that
I can build HTML Help or WebHelp outputs.
I have tried Menu > File > New > Project > Import
tab > select WinHelp Project. In the Wizard, I select the Help
Project to Import, click Next, then select the Output folder. But
there are no Source Documents listed to import. They are visible in
Windows Explorer, but RH7 does not see them. I cannot step Back /
Next or Finish without selecting files, so I can only Cancel and
try again.
Any ideas anyone?

Work-around
I discovered by trial and error that if I open the RH5
WinHelp project in RH7 first, then close it, this adds lots of
other files to the project folder.
Then I can import it into RH7 HTML.
That solves this question.

Similar Messages

Importing Word 2003 docs into RH7 HTML

I imported Word 2003 docs into RH7 for HTML and they looked
fine in the WYSIWYG window. However, when I preview the topics in
the Browser, I get HTML code for a dash, quotes and other
characters. It is an incredibly tedious process to try to search
and replace the HTML code in each document. Is this typical of Word
or Word 2003 docs that are imported into HTML, or is this a RH bug?
Does anyone have any suggestions of how to resolve the issue?
Thanks

Be sure you've downloaded all three RH7 patches (7.0.1,
7.0.2, 7.0.3).
I think 0.2 is the one that fixed these symbols, but install
each of them, in order.
Good luck,
Leon

Importing RoboHelp7 for Word project into RoboHelpHTML - error

I am trying to import my RoboHelp7 for Word project into RoboHelp7 HTML so that I can include Captivate App Demos in my help project. (As I don't seem to be able to find out how to do that in RH7forWord.)
I make a copy of my project directory from RH7forWord. I then open RH7HTML and choose to open the hpj project file in the copy directory. It works for a bit and then reports "This project is from a newer version of the program. This project is no longer compatible with this version. Please make sure you have the newest version installed."
I have rebooted, ran all updates to all Adobe products and rebooted again. It still reports the same error.
What can I do to start using RoboHelpHTML on my RH7forWord project?
Thanks,
Jeff

Ok - I have to admit complete brain fart idiocy here. I thought I was using RoboHelpHTML v7 and I was opening v6. Both of which I have on my system, and the desktop icon for the latter I have mis-named.
Very sorry for the wasted bandwidth and thank you for taking the time to respond Peter.
I will start a new topic on going from RoboHelp for Word 8 to RoboHelp HTML 8 in a moment that I hope you will take the time to offer advice on.
Thanks and apologies. I know it is ridiculous to make such a mistake.
Jeff

: how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

: how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

Save the file from Gmail onto your computer and add it to iTunes. How you save from Gmail is a Gmail question (their own support pages), not an iTunes question.

How to map import process for items

Dear All,
can anyone guide me how to map import process for items for our customer
what i understand is this process in B one
Raise PO
GRPO
Landed Cost
AP Invoice
I want to know whether this is correct. Also in this process their are clearing agents who perform the formalities at customs office and then raise bill to client for the same

Hi,
The process looks correct. For cost related to clearing agents who perform the formalities at customs office, use landed cost.
Thanks,
Gordon

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

How to Export/Import "report for the query" to another company

Hello,
I do this:
1.create query in SQL analizer
2.copy paste into SBO query generator and save
3.create report for the query
Then, How to Export/Import "report for the query" to another company ?
Thanks for your HELP.

Look for SAP Note number 600813
That's the note Adele means, I guess.
<b>Edit (@13:18)</b>
The direct link:
https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
---- Replace *SOURCE* with the source database name.
---- Replace *DEST* with the destination database name.
insert into [*DEST*].[dbo].[RDOC]
select [*SOURCE*].[dbo].[RDOC].*
from
[*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
insert into [*DEST*].[dbo].[RITM]
select [*SOURCE*].[dbo].[RITM].*
from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
Hope it helps...
Grtz, Rowdy

How can I change a Microsoft Word document file into a picture file?

How can I change a Microsoft Word document file into a picture or jpeg file? I am wanting to make the image I created my background on my macbook pro.

After I had the document image the way I wanted it, I saved it as a web page and went from there. Below are the steps starting after I did the "save as" option in Word:
1) Select "Save As Web Page". I changed the location from documents to pictures when the window came up to save it as a web page.
2) Go to "Finder" on you main screen, or if it's on your main toolbar at the bottom.
3) Click on the "Pictures" tab and find the file you just re-saved as a web page. (I included "web page" or something similar in the new title so I could easily find the correct file I was looking for)
4) Open the correct file and then "right click" on the actual image. (Use 2 fingers to do so on a Mac)
5) Select 'Use Image As Desktop Picture", and voilà! The personally created image, or whatever it is that you wanted, is now your background.
**One problem I encountered while doing this is that the image would show up like it was right-aligned in relation to the whole screen. The only way I could figure how to fix this was to go back to the very original document in Word, (the one before it was saved as a web page), and move everything over to the left.
I hope this helps someone else who was as frustrated as I was with something that I thought would have been very simple to do! If you have any tips or suggestions of your own, please feel free to share. : )

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

How can i import the data from multiple sources into single rpd in obiee11g

how can i import the data from multiple sources into single rpd in obiee11g

Hi,
to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
tnx

How do I import Bookmarks from Firefox 28.0 into Firefox 29.0.1?

How do I import Bookmarks from Firefox 28.0 into Firefox 29.0.1? I am running OS X 10.7.5 and just updated Firefox from 28.0 to 29.0.1. How do I import my old 28.0 bookmarks into 29.0.1? I've tried all the suggestions but nothing works. WHERE are my old bookmarks? Help, please!

Your bookmarks can be imported and exported from the Library (Bookmarks Manager).
*Go to the clipboard icon, click Show All Bookmarks <i>OR</i> press Cmd + Shift + B
*Once there, you'll see Import and Backup (see screenshot), you have a choice to choose between backing up as a JSON (Import and Backup -> Backup) or HTML (Import and Backup - > Export bookmarks to HTML)
Once this is done and the file has been backed up, you can import them using the same method (Import & Backup -> Backup for JSON/Import & Backup -> Import bookmarks from HTML (HTML)
One of our awesome contributors explained the difference between a JSON backup and a HTML backup that is very explanatory:
Restoring a JSON backup will replace all your current bookmarks (you get a warning about that), so if you already have bookmarks that you wish to keep then export them to an HTML file before restoring the JSON backup.
You can import that HTML file after you have restored the JSON backup to get your current bookmarks back (you need to remove duplicates).
You can't import a JSON backup to add (merge) bookmarks.
Importing bookmarks from an HTML file adds the imported bookmarks to the already existing bookmarks, so you may need to remove duplicates.
An HTML backup doesn't support tags and annotations, so if you want to preserve those then you need to use a JSON backup.
A JSON backup doesn't preserve the website favicons, so you need to visit a website to get back that favicon.

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tks

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

How do I import video from my iPhone 5S into iPhoto?

How do I import video from my iPhone 5S into iPhoto?

Connect the phone to the Mac and launch iPhoto. Select the videos in the import window and click import.

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?
RAW photos files in sony A300 are saved as "*.arw".
any one can help?

This is well known bug. One day Adobe will recognise that with the best live view system (A350/300) and best usability (A700) they need to take the Sony DSLR's seriously.
Use the Import function, but use "choose files". Your CF card (in Camera or reader) will just be another drive. Navigate down to the folder with the pictures - control+A, choose selected. Then choose copy to new location and import (safer than using move).
Don't forget to tick the backup box.
Hope this helps. Peter

How do I import RH for Word WinHelp project into RH7 HTML?

Similar Messages

Maybe you are looking for