How do I import Traditional NI-DAQ Virtual Channels and MAX 3.1

I installed Labview 7.1 on a new machine and the tools option in MAX 3.1 does not have the option to import traditional NI-DAQ configurations.

If you have support for Traditional NI-DAQ installed, you should have the option to open a configuration file from: Tools>>Traditional NI-DAQ Configuration>>Set Active Configuration. You can check the installation of Traditional NI-DAQ under the Software tree in MAX.
Hope this helps.
Regards,
Erin

Similar Messages

How is the 'import-packages' information saved in the database, and how long?

Hello,
I am developping a ECM Connector for Adobe LiveCycle ES, which is a customized component.
1 - Who should I contact to have some specific support ?
There is no detailed information yet on this on the adobe site (http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?href=000931.html&accessible=true) .
If you think that I should address my problem to another department of Adobe, please tell me which department?
I give you another description of my problem. In fact, I have been investigating on it.
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.
3 - How is the 'import-packages' information saved in the database, and how long?
In fact, on thursday, I used 'import-packages' to make a test. And since them, I can not deploy any of my components.
LiveCycle throws a ClassNotFoundException.
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
[java] at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$6.doInTransaction(Compone ntRegistryImpl.java:338)
... Caused by: java.lang.ClassNotFoundException: http-0.0.0.0-8080-1Class name com.rsd.simpleApiFolders.Context from package com.rsd.simpleApiFolders not found.
[java] at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingParentFirst(DSContainerSearchPo licy.java:234)
Thank you in advance
Regards.

1 - Who should I contact to have some specific support ?
That would depend on your Adobe support contract and if your organization has a TAM assigned. You should check with your organization's Adobe contact and see what support options your organization has purchased.
Having said that, this forum has a few people that may be able to help (but the forum does not have a SLA associated with it)
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.If your component class needs the simpleApiFolders class then yes, you still need it. Think of import-packages like a class-path statement (but with packages and not jars). Its not physically moving the package into your application, but allowing you to access it from another container.
3 - How is the 'import-packages' information saved in the database, and how long?
As far as I know they are not imported into the database. As I stated above, I believe that the import-packages just allows you to point to classes that are in the app server's classpath, but are not physically in you component jar file. As long as that class is in the app server class-path (or in the Adobe EAR file) then you should be able to access it. Is the jar file containing the simpleApiFolders class in the app server's lib directory?

How to make a virtual channel in MAX using DAQmx ?

I want to measure the CJC temperature on the TBX 1328 ( attached to SCXI 1121). I want to create a virtual channel in MAX using DAQmx. I have right clicked on DAQmx but there is no option for virtual channel. Ther is the option of 'Traditional virtual channel' which i dont want.
I used the VI to make the virtual channel but i want to knowhow to doit inMAX.
thanks

Here are 2 ways that you can create a DAQmx channel that appears in MAX.
1) In MAX, right click on "Data Neighborhood" and select "Create New...". Then click "NI-DAQmx Global Channel" (or "NI-DAQmx Task" -- a task contains the channel(s) and triggering/timing information) and click "Next". This launches the DAQ Assistant that will guide you in creating the channel or task.
2) In LV, place a NI-DAQmx Global Channel control on your panel or constant on your diagram. Right click on the control/constant and select "New Channel(DAQ Assistant)..." (Note: You can do the same from the NI-DAQmx Task control/constant to create a NI-DAQmx Task.)
Deborah

How can I import images from iphoto with the albums and folders?

How can I import images from iphoto without losing the albums and folders I already created?

In Organizer, you can choose File>get Photos and Videos>From iPhoto.
Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
Hope this information helps!
regards,
vaishali

In iPhoto 9.6 how should I import older photos located in yearly folders and monthly folders?

Before using iPhoto my photos were cataloged by locating them in folders broken down by year, month and activity and on different HDs. Over the last few years my newer iPhone photos are imported into iPhoto and saved on a separate HD. I think I read that it is possible for the photos to remain in their original locations without copying them and doubling the HD space.
Should I just dump the older photos into the same location as my newer photos and if so, how will iPhoto import them? I think I may have just answered my question!
How do you suggest I import the older photos (5,000-10,000 photos)?

Dear Mr. Devlin,
I have been reading many threads regarding iPhoto, and you seem to be the most knowledgeable person on the software. I was wondering if you could resolve some basic misunderstandings I have related to andyhutch's question. I know that iPhoto is a database, and that the software provides views into the database. Under the "LIBRARY" heading in my iPhoto sidebar, I have 4 views: "Events," "Photos," "Faces," and "Places." In which of these views am I seeing the actual photo files and in which am I seeing a pointer to the file? In other words, if I delete an "Event," am I deleting the actual photo files or just a view into the database? The same question for "Photos": if I delete one of the Photo collections, am I deleting the actual photos or just the pointers? I am trying to simplify the organization of an 8K photo collection and use smart albums more effectively, and I don't see why I should bother with two additional ways (Events and Photos) to view my photos. But I am afraid to delete anything for fear of losing my original photos.
Because you have contributed numerous posts to the Support community, you may already written something that addresses my questions. In that case, I apologize and hope that you can provide a link to that post.
Thank you.

How can I creat virtual channel and traditional devices while my card installed,I can not do?

I installed PCI-6220 card,and I also installed DAQmx and Traditional DAQ in my computer,
but I cannot creat virtual channel at the last step(attachment:TDAQ6220.jpg).
Maybe this is the reason I didn't creat traditional NI-DAQ Device,but I can not creat it.
(see attachment: DAQ Device.jpg,there is no PCI-6220 on list).
What's wrong?What shall I do?
Junwei You

Hello Rainer,
You can see this attachment(6024E.jpg),the 6024E card appears on Traditional NI-DAQ Devices,
but I don't know how can it be created(I don't creat it,we buy the whole system together with the machine).
I tried create a new traditional Device(I want to confirm 6024E), but still I can not see any NI-DAQ device in traditional NI-DAQ device
lists. See the 'Create New....' interface.How can do it?
Thanks!
Attachments:
6024E.JPG ‏128 KB

How do you simulate an encoder using a virtual channel?

I am trying to use MAX to simulate hardware so I can create a program before I purchase the hardware. I will be purchasing a USB-6211, TTL quadrature encoder, and LVDT.
I want to simulate a quadrature encoder and a LVDT. I have created a virtual channel for each and a virtual USB-6211.
The LVDT is simulated by creating a virtual analog input channel. This virtual channel works when I test the vi.
The encoder is simulated by creating a virtual angle counter. This virtual channel does not work when I test the vi.
How do I get this virtual angle counter to work?

Kristen,
I do not get an error. The problem is that I do not get any action from the virtual channel.
For
example, when I created the virtual analog input channel, this channel
provides a simulated varying voltage when I run the vi. The virtual
angle counter channel does nothing at all when I run the vi.
Attachments:
Simulation Problem.vi ‏124 KB

How to know a users company, sales org, dist. channel and division...

Hello Experts,
Is there a way to know which company, sales org, distribution channel and most importantly division a
user is currently affiliated? Really need help on this one guys since I am gonna use it for authorizations.
Thank you guys and take care!

Hi,
If your informations are not in SU03 or XD03, so I think you can't have these informations.
(Maybe with column "Terminal name" in SM04 ?? If this information has been normed in your company)
Regards,
Stéphane.

How do I import part of my libraries from iphoto and itunes from iCloud?

I just downsized and bought a mac book and am wanting to import music and photos from my old mac book pro. The problem is that I only want to import part of each library. The libraries of both apps were really out of control and had duplicates and unwanted photos, etc. Can someone help me please?

for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer.

How Do I Import Music Without iTunes "Organizing" My Library And Hard Drive

Each Time I Add Music to iTunes, It Rearanges My Music By Artist Tags. Both In iTunes And On My Hard Drive.
How Can I keep It from Doing This?

Thanks Very Much, I Saw This Function, And Was Not Sure If Was What I Was Looking For, Or If It Would Further Frustrate Me.
Thanks Again, And Have a Great Weekend!

How to do import of only table data without procedures and synonyms

Hello All,
I want to import only the tables of one database to a new database. I did a table level export of one schema. But along with it the stored procedures,synonyms, views etc are exported. Is there any way to stop them. Or is it possible to import only the tables from the dump created?
Regards
Satish

Hi Maran,
Thanks for the feedback. I think I didnot specify the parafile with the table list while exporting. I am redoing it now. I shall update this post within 20 minutes.
Regards
Satish

How do I import a bookmarks folder from another computer and add it to my existing list of bookmarks folders?

I have two computers. One contains a folder of bookmarks that I want to transfer to the other computer and add it in. I don't want to replace all my bookmarks on the second computer with those from the first computer. How do I do this?

Which kind of backup did you do? A backup from the Bookmarks Organizer or a backup using the program MozBackup?
If you used MozBackup, you need to install it on the new computer to decode the backup. http://mozbackup.jasnapaka.com/
If you used the Bookmarks Organizer, you might just need to add .json to the end of the file name.

How do I import an index into Indesign for epub and keep the links live?

What is the best way to import a subject index (the indexer uses skyindex, and has an option to output index links to indesign para numbers), but he currently provides a word file for import into Indesign 5.5 with dead page numbers. We need to retain that for print publishing, but change the index numbers for epub, to links in both directions. Whats the best way to tackle this? I hope someone out there has done this!

Page numbers do not exist in epub.
Have a read through this:
http://www.pigsgourdsandwikis.com/2010/07/creating-index-for-epub-with-indesign.html
Bob

Q ? How do I import my work that I with logic and FCP with 5.1 audio to ATV

I work as a professional musician and work on soundtracks and when I finish & bounce my mix I want to take the .mov file home and watch it on my ATV . Actually thats why I brought the ATV so I could watch and listen to what I have done in the studio at home ...
Please is there a way to do this ? Or is this great little box doomed to buying or renting films from the itunes site ?

yildox wrote:
I think I just found the answer to my question..
Quicktime has a itunes export feature so therefor I can directly send the .mov file into ATV automatically great I didn't know it was so easy ..
I wasn't sure whether that preset worked with 5.1. and had assumed you had tried it.
If your content is HD, the tv preset will export at a resolution of 540p, being in Europe your source material is probably 25 fps which would allow you to manually use compressor to create a 720p export which will play on the tv. Although a little more work than a preset once you have found an optimal export setting you can create your own preset if your manual export proves to be of better quality.
Buy the way can ATV read directly from a usb hard disk connected to the ATV ?
No.

How can I import dvds that have already into iMovie and edit them?

I just purchased an iMac and after Apple moved all of my movies into iMac from my PC, I am trying to edit the movies in iMovie that are in the iMac. Can't seem to figure this out. Is it possible to create a new movie from an .avi file? Also, why is it when I click on a frame in an iMovie it keeps going back to the first frame??? Whew , very frustrating!

Is it possible to create a new movie from an .avi file?
You'll have to convert the AVI to a format iMovie can accept. You might try the freeware MPEG StreamClip and see if it can handle your AVI, though AVI is just a container format and can use any number of codecs, some of which have never been ported to Mac.
Regards.

How do I import Traditiona​l NI-DAQ Virtual Channels and MAX 3.1

Similar Messages

Maybe you are looking for

How do I import Traditional NI-DAQ Virtual Channels and MAX 3.1