How do I import video from a Canon GL-2 to iMovie '11
iMovie '11 will not recognize my Canon GL-2 mini DV Camcorder, so I cannot import video
Hi
As it is a miniDV tape Camera - then You need a FireWire Cable (If Your Mac have a FW-port - not all got this).
my notes on this.
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W
Similar Messages
-
How do I import video from my canon vixia hv40 into imovie?
How do I import video from my canon vixia hv 40 into imovie?
First decide which editing program you intend to use; iMovie, FCE, FCP, Adobe Premier, etc. Read the user's manual or Help files for your chosen application to determine the steps needed: the procedure will vary somewhat from application to application.
Next, with the camera and the computer off, connect the Firewire cable to both units, then power up. Set the camera to VTR (play) mode. Open your editing program and follow the instructions provided in the Help files for capturing DV footage from tape.
Do NOT expect the camera to mount on your desktop as if it were a hard drive or optical disc.
-DH
Message was edited by: David Harbsmeier
Message was edited by: David Harbsmeier -
How do I import video from a Canon Rebel T2i?
I just got a Canon T2i for filming. How do I import the videos from the camera into Final Cut Express 4.0.1? Or, what format do I need to convert it to?
Use MPEG Streamclip or Clipwrap to convert your T2i video files to QuickTime/Apple Intermediate Codec. Import the QT/AIC files into FCE ... using an appropriate AIC easy setup in FCE. (The easy setup choice depends on how you shot your video ... 720p30, 1080i60 etc.)
-
How do I import video from my Canon ZR40 into my iMac?
I've got a Canon ZR40 DV camcorder that's about 5 years old and a brand new iMac. I've also got a firewire cable that connects the camcorder to the computer...but beyond that I'm clueless. When I connect the two devices via the cable, I'm not seeing anything come up on my desktop. Any advice would be much appreciated. Thank you!
First decide which editing program you intend to use; iMovie, FCE, FCP, Adobe Premier, etc. Read the user's manual or Help files for your chosen application to determine the steps needed: the procedure will vary somewhat from application to application.
Next, with the camera and the computer off, connect the Firewire cable to both units, then power up. Set the camera to VTR (play) mode. Open your editing program and follow the instructions provided in the Help files for capturing DV footage from tape.
Do NOT expect the camera to mount on your desktop as if it were a hard drive or optical disc.
-DH
Message was edited by: David Harbsmeier
Message was edited by: David Harbsmeier -
I can no longer import videos from my canon vixia HFS100 into imovie 09
I have had my canon HFS100 for about 6 months. It is listed in the camcorders supported by imovie 09. It worked great but after the last imovie update the camcorder is no longer recognized by imovie. APPLE please fix this bug now!!!! It worked before the update now it doesn't ***. APPLE support please respond to my post with a status on what to do. I see many post about this similar problem.
I strongly believe your AVCHD file structure is corrupt. Or at least no longer compatible with iMovies understanding of how the structure should be. The camera will continue to work, but iMovie will no longer recognise it. I dont think this is a bug in imovie, iMovie is just not user-friendly in this respect, as it does not to tell the user about the problem.
http://discussions.apple.com/message.jspa?messageID=11531525#11531525
After salvaging your footage, you should re-format your memory card to make iMovie accept it again. -
How do I import video from my new Canon FX300?
How do I import video from my Canon FX300 into FCP?
It's probably got no connection with your problem but just to rule it out, trash your preferences . . . it'll only take a minute so you've nothing to lose.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly. -
How do i import video from firewire?
I'm thinking of getting a Macbook Air for traveling where I can import photo's for editing and uploading and import video for editing. It looks like the Macbook Air will run Aperature and Final Cut Pro X but the problem is, how do I import video from a Camcorder like the Canon GL2? It is a firewire connection and the Macbook Air only has USB and Thunderbolt.
Thanks... GarySonnet is supposed to be creating a TB-to-FW800 adapter... their press-release said available Q2/2012. No idea of the price, or its capabilities.
-
How can I download video from a Canon ZR30 video camera to my IMac? I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end. No signal shows up on the computer when I connect the red and yellow connectors.
Broken solder joints on the camera me thinks!!
sorry -
HOW DO I IMPORT VIDEO FROM IPAD TO MACBOOK PRO
HOW DO I IMPORT VIDEO FROM IPAD TO MACBOOK PRO
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Copy Photos (& Videos) Between iOS Devices
http://tinyurl.com/cnz95bc
Cheers, Tom -
Importing Video from a Canon 7D
Has anyone tried importing video from a Canon 7D in Aperture 3? My videos don't show up at all in the Import dialog.
Figured it out myself actually... If I switch the "RAW+JPEG Pairs" parameter to Import "Both Separate Masters" it works fine. If it's set to RAW only, it doesn't seem to see the Video files.
-
How do I import video from Sony TRV22E into iMovie ?
How do I import video from Sony TRV22E into iMovie ?
Hi
Sony TRV22E - CAN ONLY export the VIDEO material via a FireWire Cable (iLinc)
Then Your Mac need eiter
- a FireWire port - or -
- a Thunderbolt port
if only Thunderbolt - Then You need a FireWire to Thunderbolt converter.
The USB- can only copy over the Still photos You also cam take with Your Camera. Will NEVER work for Video Export.
Yours Bengt W -
How do i import video from my go pro to i movies
How do I import video from my go pro hero 4 to I movies
What model MacBook Pro do you have? On my late 2011, I used to use a Mini DisplayPort/Thunderbolt to HDMI adapter to get video and audio from my Mac to my television. I used this adapter from Monoprice. Worked great - I just no longer use it because I bought a 27" monitor.
You can also use AirPlay mirroring if you've the right MBP and an Apple TV - but the wired method works, too.
Clinton -
How do I import video from my iPhone 5S into iPhoto?
How do I import video from my iPhone 5S into iPhoto?
Connect the phone to the Mac and launch iPhoto. Select the videos in the import window and click import.
-
How do i import video from my sony cx130 to imovie
how do i import video from my sony cx130 to imovie?
Follow the steps below to troubleshoot if the computer does not recognize the USB connection from the camcorder.
Turn off the camcorder.
Ensure the USB cable is connected securely to the camcorder.
Ensure the other end of the USB cable is connected securely to the USB port on the computer. NOTE: Connection through a USB hub is not supported.
With the exception of the mouse, keyboard, and camcorder, remove any other USB connected devices from the computer.
Turn on the camcorder.
On the camcorder LCD screen, touch the computer or hard disk icon.
If the issue is still not resolved, connect the USB cable to a different USB port on the computer.
If the issue is still not resolved, try uninstalling and reinstalling the USB driver.
If the issue is still not resolved, test the USB port on the computer by connecting a different USB device.
This is from the Sony website. -
HT201665 how do i import video from my iPad to my mac?
my question is how do i import video from my iPad to my macair?
<Personal Information Removed by Host>Plug in to Mac, open iPhoto and import the video. From iPhoto you can then export it to another folder via Export.
Pete
Maybe you are looking for
-
Hi Guys, After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-
-
Acrobat Pro XI Mac 11.0.10 freezes every time I open a document
Every time I open a document in Acrobat XI Pro 11.0.10, the app freezes with a spinning beach ball. Beach ball will go for 10 minutes plus before I can't stand it and force quit. I am using Macbook Pro 15 Retina with Mavericks (OSX 10.9.5). The same
-
My iphone keeps crashing and turning itself off.....even though battery life is fine...as soon as i plug charger in it comes bcak on....help very frustrating...3g
-
Import Bank Details qualifier table not getting mapped in vendor scenario
Hi All, I am using MDM5.5 SP5. Trying to import the IDoc CREMDM04 from ECC 5.0 to MDM. Using the note 830864 i have copied all the reference data to MDM using the xml that was generated by the program referred in the note.. But Bank details is missin
-
Urgent: Failed to read WSDL
Hi, I am getting error in our production system similar to below error whenever the load in the server is very high. How do I resolve this problem? The process domain encountered the following errors while loading the process "myOrderBooking" (revisi