How do I include the MIDI sound database in my JAR?

Do I just put it in the Jar and type include soundbank or something?

EJP wrote:
MIDI not working on other PC's.And still no SSCCE.
db

Similar Messages

How can I remove the background sound from the headphone jack for my MacBoo

for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
At first thought that the headphone jack (3.5 mm Headphone:
Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
When I added iPhonu3GS playing - the background sound were not, then everything is OK!
How can I remove the background sound from the headphone jack for my MacBook Air 13?

There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
http://support.apple.com/kb/HT2526?viewlocale=en_US
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

How do I mute the startup sound

How do I mute the startup sound on my imac

The start up sound is there for specific reasons, for example if you do a Safe Boot or PRAM reset you need the start up sound to do those key functions. I would recommend against masking it and follow Apple's suggestions. Please read your owners manual, where Apple states:
Putting Your iMac to Sleep
If you‘ll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process.
This means don't turn it off, my iMac is about 5 years old now. The only time it's restarted is when I'm doing updates, it has reliably that way and has never given me any problems. In short, let it sleep when it's not being used.

How do I change the startup sound level on my desktop??

How do I change the startup sound level on my desktop?

use StartNinja ! worked for me.
it works under Mountain Lion and is even retina-ready:
http://www.allvu.com/index.php/sndownloadpage.html

How do I enable the startup sound on Mac OS 10.2.8(Jaguar)

Three things
1.How do I enable the startup sound on Mac OS 10.2.8(Jaguar)
I am using an iMac G4
I like the startup chime of mac osx but it doesn't seem to be chiming when I turn the computer on.
2. How do I get safari+flash player on 10.2.8
3. How do I update the computer (e.g. Windows update kind off thing)
Please help.
Cheers,
Mittens131

1. Make sure the volume is on. Check that the machine makes other sounds.
2. Here is a link for Safari for a Mac 10.2.8
http://support.apple.com/kb/HT2964
Though I'd be surprised if it would be very useful. Things have changed a lot on the internet since that came out. An old version of Firefox might be better. I don't know where you would get an old version of flash. It is an Adobe product.
3. There are no further updates to Jaguar 10.2 than you already have, 10.2.8 that was the last update.

How can i disable the startup sound on the Droid Turbo?

How can I disable the startup sound on the Droid Turbo?

I was going to suggest doing the Following from the Link I added below to see if Silence Mode would silence the power up but on my Droid Maxx it does not the start up Droid is still present so I'm not really sure there is an option to silence it.
The First Link is for the ( Ultra Droid Maxx and Mini) the Second Link is for the Droid Turbo. the instructions for the two style of phones are the same.. as far as I could tell
Adjusting audio alerts
Adjusting audio alerts

How do I disable the startup sound?

How do I disable the startup sound? The sound that plays straight after you push the power button.

See this thread:
http://discussions.apple.com/thread.jspa?messageID=2505976&#2505976

How do I turn the message sounds off while I'm talking on the iphone?

Can someone please tell me how to turn off the message sound so it doesn't play while I'm talking on the iphone?

Flip the Ring/Silent switch.

HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
Thanks

Transfer the movie from your iPad to your MacBook then. =)
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296

HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

How do you turn the weird sound off when sending a text using the iPhone 4S?

Go to Settings-Sounds-Text Tone and change to None. You're referring to the sound when posting a message to someone else, correct? The only issue is if you set to none, you will not hear the incoming either.

How do you change the keyboard sound?

how do you change the keyboard sound?

you can turn it off or leave it on... you cannot change it

How can we include the property value into the News RSS?

We have defined object property u201CDepartmentu201D that is used in News XML creating form. How can we include the property value into the News RSS (set value of the particular RSS XML tag)?

We have solved the issue with NWDS

How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
thanx in advance for your response!

Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
The external channel instrument strip will look like this.
Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
In the channel strip inspector you can send patch changes to the SV-1.
Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

How can I use the same Sound variable for multiple sounds?

I need my program to play many different mp3 files at different times. I'm reading that you can not load different mp3 files into the same Sound variable. But there must be a way around this right? Can I Unload mp3 files some how? Or can I delete the Sound variable and declare it again? I don't want to have hundreds of Sound variables so what do I do? Thank you.

delete doesn't work in as3. you must remove all listeners and references including nulling the variables. for displayobjects, they need to be removed from the display list.
p.s. you don't need to create a sound instance until you need to load an mp3 using one. so, if you're waiting for user input to start loading an mp3, you should wait for that input to create that sound instance.

How do I include the MIDI sound database in my JAR?

Similar Messages

Maybe you are looking for