How do I increase default time of fade out audio and video

Hi. Still working with elements 8. Today is another day. I notice lately that I right click on the end of my clip and hit the fade out audio and video
tab but it is a bit short and sloppy for me. I want a slightly smoother and longer fade out audio and video. How do i achieve this? The default time on transitions is fine,,,JUST the fade out on the END of clip?
Thanks Howard

Also, if you want to save a customized fade out for future use, you can do that too.
Google Books has Steve Grisetti's Premiere Elements In A Snap book explaining how to do so. (See pages 165 and 166 at the following link)
http://tiny.cc/ijdi8
This is for an earlier version of Premiere Elements but I suspect the steps are nearly identical for PRE8.

Similar Messages

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

HOW DO I FIND THE DRIVERS FOR WINDOWS 8 AUDIO AND VIDEO TO UNINSTALL?

I NEED TO INSTALL AND UNINSTALL WINDOWS 8 DRIVERS FOR AUDIO AND VIDEO SO THAT I MAY REINSTALL THEM, BUT I DON'T KNOW WHERE TO GO TO FIND THEM IN THE FIRST PLACE.
ALSO, IF I PURCHASE THE PROGRAM FOR UPDATING DRIVERS, WILL THAT PROGRAM ALSO INSTALL THE NEW AUDIO/VIDEO DRIVERS AND UNINSTALL THE FORMER ONES SO THAT I DON'T HAVE TO GO THROUGH SO MANY STEPS BY MYSELF. I FIND THE DIRECTIONS TO DO THIS FOR MYSELF VERY COMPLICATED.

Hi, I would like to assist you on this matter, however I would need some information from you first. I see that you are running windows 8. What is the make and model number of the computer that you are using? The windows 8 that you are using, is it a 32 bit or a 64 bit operating system? Please write back and I will be happy to do research on this issue.
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to Set Automatic Default Time in Calendar

Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostaman

Ok It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?

Iphone 4s on Orange in UK. How do I increase ring time before answer service kicks in?

iphone 4s on Orange in UK. How do i increase ring time before orange answer service kicks in?

Tried that. They told me to
**61*
Check answer phone number
then *11*20##call key
Made no difference

How do I fade out audio in Premiere Elements 13?

HOW DO I FADE OUT AUDIO IN PREMIERE ELEMENTS 13?

ATR
Thanks for answering,
im moving slowely forward in speeding up making presentations by using the new discovered smart tricks or functions.
So you understand my level of expertise:
This step by step production methode im using now give's me controle without the (full) knowledge of all the (smart)functions in this program.and slowely learning the way arround.
starting a project: a mix of photo's and avi's, starting with manual time line filling with the selected files then the timesaving "Standard crosover on all selected".
second: placing a header with the titel at the front and a ending a the end. (cut al the wrong or bad pieces and extend some photo viewingtime if needed.)
And then adding subtitels/tekst and use some other crosovers to highlight the change of subject or stills to movie.
And at last: placing the background music on "soundtrack": after some fiddeling around ive choose to cut the musictrack between the avi's instead of let the music play all the time and adjust the volume down to zero when a avi is playing.
this have two advantages:
1) the songs can be streched by by cut and jumping to the end of the avi soundtrack. (no loss of music through fading out and still let it play so need less musicsongs.)
2) And the rightclick fade function with the standaard fadingtime => "fade out" and "fade in" is easly to use because of the end track avi and begin track music timeline. (And if needed lowering the fading slope/ extend the fading time by moving the "points" on the audio line)
But; its a lot of work and after the first run through the presentation(or watching on TV) and there is a adjustment needed (fadingtime, volume-changes) you have to adjust every bit of the soundtrack. (keeping the volume "feeling" the same is the difficult part.)
I will read about the Smart Mix function and test it on a other project. see of its fits my kind of using and expertise. (every automatic (smart) function needs understanding of its purpes and limitations and there are a lot of them in premiere
What is in your opinion the most effective way of adjusting volume of audio parts across the hole project so its merged in to one audio/soundlevel?
(and offcourse in the hole way of building the presentation.)

How to edit i-tunes s.a. fade in, fade out, cut and save for burning CD ?

How to edit i-tunes, s.a. fade in fade out, cut and save for burning CD.
I was directed to this forum by i-tunes helpdesk. Can some give advise how I can process those additional features that are not available in i-tunes 8 ?
Thanks.
Kris.

Hi
iMovie'08 & 09 is not the best tools to do a DVD or a DiskImage (via iDVD) from.
You use iDVD to do the DiskImage - but that's when the movie is done.
You can't (at least I can't) do a diskimage first then put a movie into it.
The movie has to be encoded eg .mpeg2 and that's including the rest of the DVD structure too.
No body builds houses - roof first then the supporting walls to end with throwing
in a basement as a last action.
To do a Data-DVD (*not playable in a DVD-player*) is another story.
Just insert the DVD disk and when asked select format.
This makes a DVD-ROM and You can drop movies and other files into this but
when burned (taken out) it's done (one time burn)
Please elaborate on what You want to be the result.
iMovie HD 6 and iDVD'08 or 09 is a very nice combination.
Yours Bengt W

How do I get a time value in days, hours and minutes returned to a cell from a calculation of distance divided by speed?

How do I get a time value in days, hours and minutes returned to a cell from a calculation of distance divided by speed?

Simon,
you can use the duration function:
B4=DURATION(0,0,B1/B2)
you can further, format the cell as a duration like this using the cell inspector:

How do you set defaults in pages such as font and moving between cells in a table?

How do you set defaults in Pages such as font and moving between cells in a table?

Default layout and styles can be set by setting up a sheet with your settings and saving as a user template (File > Save As Template). I don't know of a way to set defaults for moving between cells in a table.

How to Install crystal run time programs with out designer.

Can anyone suggest me how to install crystal run time program with out installing entire designer software.
Is it coming along with CR software package, which we have to do custom install or is it coming as a different package.
Currently my client is using only the run time programs to trigger crystal report from VB app but developers have installed entire software for development. We need to figure out how this install can be done, as it was done long time before and folks who have done it left the company.
Any suggestion on this would be of great help to me.

See this wiki:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0
Ludek

How to fade in and fade out audio in the new version of Imovie?

Please help me!
how to fade in and fade out audio in the new version of Imovie?

There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

How do i get the time to stopping coming on and off on my black screen. is that daydream

how do i get the time to stop coming on and off on my black screen. is that daydrea

https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/95499/p/30,6720,8882

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

FCP User Manual, page 798.
You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

My ipad mini fades out, freezes and shows streaks of lines on the screen. What is the problem or how can this be fixed?

my ipad mini fades out, freezes and shows streaks of lines on the screen. What is the problem or how can this be fixed?

try reseting the device
try restoring the device as new
then replace

How do I increase default time of fade out audio and video

Similar Messages

Maybe you are looking for