How do I increase image of iPad when projecting through AppleTV and projector?

I have several AppleTVs hooked to either NEC or Mitshbishi projectors. From iPads I connect to the AppleTVs via AirPlay and mirror. The problem is that the iPad projected image is small and cannot be increased that much. I have messed with resolution on both the AppleTVs and the projectors but the image size doesn't increase that much, even when I hit the Magnify button on the projector's remote. It's especially small when holding the iPad in portrait, but increases somewhat while in landscape, but never completely fills the projector screen like the AppleTV homescreen or while projecting a laptop image. Is there a way to increase the size of the projected iPad image?

I have this same issue.
Is there an app that would work better for this?
I'd much rather use a text app in portrait mode, but if needed I can make snapshots of the screen and use images. But I also need the image or document scaled as large as possible on the projector screen.
Does anyone know of an app I should be using or solution?
I am a worship leader at a small church. I want to mirror my ipad from the platform so the other musicians can see the lyrics and chords. My ipad needs to be in portrait mode. Again, I'd much rather use a text app, but can work around using a image if I must.
Thank you for your time,
Dave

Similar Messages

How can I create an icon that when clicked will open and maximize an image file?

How do I create a icon that when clicked will open and maximize an image file? I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page. I'd prefer to have a graphic that when clicked it simply opens up the image. This is for a very simple question/answer book. The user is suppose to look at a picture and locate something. I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified.
Is this possible?

Have yiu tried the PopOver widget? You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project.

How do i unlock my ipad when it's disabled and says connect to itunes

how do i unlock my ipad when it's diasabled and says connect to itunes?

Please see: http://support.apple.com/kb/HT1212 for full details.
Regards,
Steve

HT1212 How do I reset my sons Ipad, when its states that its Disabled and to connect to itunes, and when I do its states that its locked and I need to entre that password, but I cant because its DISABLED!

How do I reset my sons Ipad, when its states that it's disabled and to conect to itunes, and when I do i get a message thats that says I need to entre a password, but I cant as the Ipad is Disabled

Ive found the solution,
TillyLove13 wrote:
Sorry to hear, I am having the same issue myself, I entered a new passcode last night after i synced the new ios 7 cant rememeber my numbers all i remember is i used 2 and 3 and i got it to where i disabled my ipad. I used the connect to itunes as my restore but its not giving me any options thats helpfull it says restore and update im thinking maybe wipe my ipad and than put the new ios 7 in but nope seens mine was synced yesterday it only restores it back to previous locked position. im trying to get some way around it myself as soon as i find out ill make you aware. good luck. im sorry your probably just as flusterated as me

HT1349 How can i get into my iPad when i forgot my password?

How can i get into my ipad when i forgot my password?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

How many sign-on's are included when I purchase Photoshop and Illustrator? Can more than one person have access on separate computers?

How many sign-on's are included when I purchase Photoshop and Illustrator? Can more than one person have access on separate computers?

You have 2 activations and the licenses is tied to you personally and you only. You cannot let other people use your software (unless they are family).
Mylenium

How do i unlock my daughters ipad she forgot the password and disabled it. my moms got it for her so i will be using a different computer than it was originally set up with

how do i unock my daughters ipad she forgot her password and it is now disabled. my mom originally bought the ipad for her so i will be trying to unlock it from my computer which is not the computer that it was originally set up on

broblenes78 wrote:
i need to turn the find my ipad off before i can restore my ipad
Correct. The information is contained in the supplied Link.

Why do I have a constant notification on my settings? How do I get rid of it? Looked through everything and can't see why it's there

Why do I have a constant notification on my settings? How do I get rid of it? Looked through everything and can't see why it's there

Restore from a backup will get you some 'other' back.
Still not happy, Restore in iTunes, Setup as new. Sync back personal data using iTunes Tabs

How can I increase the thumbnail size when using Safari to upload an image to a website?

I upload many images to multiple websites and when using Safari to upload these images, the thumbnails are so small I can barely make out what the image is. I can easily figure out how to increase the thumbnail size when viewing them in Finder and set the default to my liking, but I cannot seem to find a way to do this in Safari. The last topic I saw on this was form 2013 and have not seen any update. Is there a way to do this?

Delete all unused, invisible layers.
Sometimes zip compression is better than jpg compression (in the pdf output settings). Zip is lossless, and works better with non gradient colour or no images.
Flattening the image before you save it to pdf can reduce the file size if you are using jpg compression.
Post a preview of your pdf and we can comment further on how to reduce the file size.

How can i log onto my ipad when the screen says ipad is disabled log onto itunes. i logged on to itunes but nothing is recognized

Hi,
I had forgotten my password and made many attempts to log on to my Ipad. Finally after remembering the password it was to late to enter it. My screen says "Ipad is disabled, log on to ITunes. I logged onto ITunes and nothing is recognized an I cant find a category for correcting the problem. Any help will be greatly appreciated. Thanks

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do you get into your ipad when forgotten the passcode?

I have forgotten my main passcode help?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How do I increase image of iPad when projecting through AppleTV and projector?

Similar Messages

Maybe you are looking for